Assembly

POLE SAW NAMES AND TERMS

Continued

Oiler Control System for oiling guide bar and chain. Outer Pole Retains the moveable inner pole.

Saw Chain (Chain) Loop of chain having cutting teeth for cutting wood. The motor drives chain. The guide bar supports chain.

Sprocket Toothed wheel that drives chain. Switch Device that completes or interrupts electri- cal circuit to motor of saw.

Switch Lockout Device that reduces accidental start- ing of saw.

Trigger Device that turns saw on and off. Squeezing trigger turns saw on. Releasing trigger turns saw off. Trimming (Pruning) Process of cutting limb(s) from a living tree.

Undercut An upward cut from underside of log or limb. This is done while in normal cutting position and cutting with top of guide bar.

1.Before adjusting chain, make sure guide bar nuts are only Þnger tight (see Figure 4). Also make sure adjusting block is in oval adjusting hole on guide bar.

2.Turn adjusting screw clockwise until all slack is out of chain. Note: There should be no gap be- tween side links of chain and bottom of guide bar.

3.Wearing protective gloves, move chain around guide bar. Chain should move freely. If chain does not move freely, loosen chain by turning adjusting screw counterclockwise.

4.After chain tension is correct, tighten guide bar nuts Þrmly. If not, guide bar will move and loosen chain tension. This will increase the risk of kick- back. This can also damage saw. Note: A new chain will stretch. Check new chain after Þrst few minutes of operation. Allow chain to cool down. Readjust chain tension.

ASSEMBLY OF POLE SAW

Step ❶ Ð Squeeze Trigger

The plastic hardware bag for the Pole Saw should include the following:

CHAIN SAW HARDWARE

¥ (1) Scabbard

POLE SAW HARDWARE

¥(1) Handle Bracket

¥(1) Knob

¥(1) Lock Washer

ASSEMBLY OF CHAIN SAW

Assemble the chain saw before assembling the pole. Refer to chain saw manual for assembly instructions.

CAUTION: Do not place chain on saw backwards. If chain is backwards, saw will vibrate badly and will not cut.

Make sure cutting edges of chain are facing in the right direction. Position chain so cutting edges on top of guide bar face guide bar nose (see Figure 2).

SAW CHAIN TENSION

ADJUSTMENT

WARNING: Maintain proper chain tension always. A loose chain will in- crease the risk of kickback. A loose chain may jump out of guide bar groove. This may injure operator and damage chain. A loose chain will cause chain, guide bar, and sprocket to wear rapidly.

1A Push in and hold	1B Squeeze and hold
1A Push in and hold	trigger.
trigger lockout button.

Step ❷ Ð Insert Pole Bracket into Saw

2A Continue to hold trigger while completing step 2B.

2B Insert pole bracket into saw. Note: Pole Bracket holds trigger in “ON” position.

www.desatech.com

111219

RPS2N1: 106821A specifications

The Remington RPS2N1: 106821A is an innovative personal grooming tool that epitomizes versatility and efficiency, setting a new standard in the realm of home grooming. With modern design and advanced technology, this grooming kit caters to a variety of styling needs, ensuring users achieve their desired look with ease.

At the heart of the RPS2N1 lies its multi-functionality. This grooming device combines several essential tools into one compact unit, making it an ideal companion for anyone looking to streamline their grooming routine. The kit typically includes hair clippers, trimmers, and shaving heads, empowering users to tackle everything from detailed beard shaping to full head shaves.

One of the standout features of the Remington RPS2N1 is its advanced blade technology. The stainless-steel cutting blades are engineered for precision, offering clean and smooth cuts while minimizing the risk of irritation. The self-sharpening blades ensure longevity, allowing the device to maintain performance over time without the need for frequent replacement.

Another noteworthy aspect is the device’s ergonomic design. The comfortable grip allows for extended use without fatigue, making it easier to navigate through various grooming tasks. Additionally, the lightweight structure means that users can easily maneuver the device in hard-to-reach areas.

The RPS2N1 is designed with user convenience in mind, featuring a rechargeable battery that offers impressive run-time on a single charge. This cordless functionality provides the user with the freedom to groom without being tethered to a power outlet. Furthermore, the quick-charge feature ensures that users spend less time waiting and more time grooming.

Remington also prioritizes hygiene with the RPS2N1. Many components of the grooming kit are washable, allowing for easy cleaning and maintenance, which adds to the tool's longevity and ensures a hygienic grooming experience.

Additionally, the versatility of the RPS2N1 is complemented by adjustable length settings and various attachment combs, enabling users to easily achieve their preferred hair lengths and styles. This adaptability makes it suitable for a wide range of grooming needs, from precise detail work to bulk removal.

In summary, the Remington RPS2N1: 106821A is a top-tier personal grooming tool that elegantly combines advanced technology, user-friendly design, and multi-functionality. With its durable construction, cutting-edge blade technology, and thoughtful features aimed at enhancing the grooming experience, it is a valuable addition to any grooming routine. Whether for everyday use or occasional touch-ups, the RPS2N1 offers everything one needs to maintain a sharp and polished appearance.