Technical Service Repair Service | Remington RPS2N1: 106821A

OPERATING CHAIN SAW

Continued

OILING CHAIN

Always check oil level before using saw. Do not attempt to operate the oil system while saw is in operation. To oil chain, press squeeze bulb. Oil will feed onto the guide bar and chain. Press squeeze bulb at least once before each cut. Check oil level often by looking at oil sight level hole. Oil sight level hole is on left side of saw, be- tween front handle and front hand guard.

CUTTING WITH THE POLE SAW

1.Connect saw to extension cord. Connect exten- sion cord to power supply.

2.Use both hands to grip Pole Saw. Use only des- ignated grip areas when operating Pole Saw (see Figure 7). Use firm grip. Thumbs and fingers must wrap around Pole Saw handle and pole.

3.Make sure your footing is Þrm. Keep feet apart. Divide your weight evenly on both feet.

4.When ready to make a cut, press in trigger switch lock-out and squeeze trigger switch (see Figure 8). This will turn Pole Saw on. Releasing trigger switch will turn Pole Saw off. Make sure saw is running at full speed before starting a cut.

5.When starting a cut, place moving chain against wood. Hold Pole Saw firmly in place to avoid possible bouncing or skating (sideways move- ment) of saw.

6.Guide Pole Saw using light pressure. Do not force Pole Saw. The motor will overload and can burn out. It will do the job better and safer at the rate for which it was intended.

7.Remove Pole Saw from a cut with saw running at full speed. Stop Pole Saw by releasing trigger. Make sure chain has stopped before setting Pole Saw down.

TRIMMING A TREE (PRUNING)

WARNING: Avoid kickback. Kick- back can result in severe injury or death. See Kickback, page 3, to avoid risk of kickback.

WARNING: Do not operate Pole Saw while

¥in a tree

¥on a ladder or any other unstable surface

¥in any awkward position

You may lose control of Pole Saw caus- ing severe injury.

WARNING: Do not extend arms above shoulders when using Pole Saw.

CAUTION: Seek professional help if facing conditions beyond your ability.

Trimming a tree is the process of cutting limbs from a living tree. Make sure your footing is Þrm. Keep feet apart. Divide your weight evenly on both feet. Follow directions below to trim a tree.

1.Make Þrst cut six inches from tree trunk on un- derside of limb. Use top of guide bar to make this cut. Cut 1/3 through diameter of limb (see Figure 9).

2.Move two to four inches farther out on limb. Make second cut from above limb. Continue cut until you cut limb off.

3.Make third cut as close to tree trunk as possible on underside of limb stub. Use top of guide bar to make this cut. Cut 1/3 through diameter of stub.

4.Make fourth cut directly above third cut. Cut down to meet third cut. This will remove limb stub.

TECHNICAL SERVICE

You may have further questions about assembling, operating, or maintaining this saw. If so, contact our Technical Service Department at 1-800-858-8501. You can also visit our technical service web site at www.desatech.com.

REPAIR SERVICE

Note: Only use original replacement parts. This will protect your warranty coverage for parts replaced under warranty.

Each authorized service center is independently owned and operated. For additional service center or warranty information, call 1-800-858-8501 or visit our technical service web site at www.desatech.com.

WARRANTY SERVICE

If Pole Saw requires warranty service, return it to near- est authorized service center.You must show proof of purchase. If faulty materials or workmanship caused damage, we will replace saw without charge.

NON-WARRANTY SERVICE

If Pole Saw requires service, return it to nearest au- thorized service center. Repairs will be billed to you at regular repair list prices. Note: Normal wear, mis- use, abuse, neglect, or accidental damage is not cov- ered under warranty.

www.desatech.com

111219

RPS2N1: 106821A specifications

The Remington RPS2N1: 106821A is an innovative personal grooming tool that epitomizes versatility and efficiency, setting a new standard in the realm of home grooming. With modern design and advanced technology, this grooming kit caters to a variety of styling needs, ensuring users achieve their desired look with ease.

At the heart of the RPS2N1 lies its multi-functionality. This grooming device combines several essential tools into one compact unit, making it an ideal companion for anyone looking to streamline their grooming routine. The kit typically includes hair clippers, trimmers, and shaving heads, empowering users to tackle everything from detailed beard shaping to full head shaves.

One of the standout features of the Remington RPS2N1 is its advanced blade technology. The stainless-steel cutting blades are engineered for precision, offering clean and smooth cuts while minimizing the risk of irritation. The self-sharpening blades ensure longevity, allowing the device to maintain performance over time without the need for frequent replacement.

Another noteworthy aspect is the device’s ergonomic design. The comfortable grip allows for extended use without fatigue, making it easier to navigate through various grooming tasks. Additionally, the lightweight structure means that users can easily maneuver the device in hard-to-reach areas.

The RPS2N1 is designed with user convenience in mind, featuring a rechargeable battery that offers impressive run-time on a single charge. This cordless functionality provides the user with the freedom to groom without being tethered to a power outlet. Furthermore, the quick-charge feature ensures that users spend less time waiting and more time grooming.

Remington also prioritizes hygiene with the RPS2N1. Many components of the grooming kit are washable, allowing for easy cleaning and maintenance, which adds to the tool's longevity and ensures a hygienic grooming experience.

Additionally, the versatility of the RPS2N1 is complemented by adjustable length settings and various attachment combs, enabling users to easily achieve their preferred hair lengths and styles. This adaptability makes it suitable for a wide range of grooming needs, from precise detail work to bulk removal.

In summary, the Remington RPS2N1: 106821A is a top-tier personal grooming tool that elegantly combines advanced technology, user-friendly design, and multi-functionality. With its durable construction, cutting-edge blade technology, and thoughtful features aimed at enhancing the grooming experience, it is a valuable addition to any grooming routine. Whether for everyday use or occasional touch-ups, the RPS2N1 offers everything one needs to maintain a sharp and polished appearance.