NaviTrack® II
heat registers, stoves or other products (including amplifiers) that produce heat.
Service
•Diagnostic instrument service must be performed only by qualified repair personnel. Service or main- tenance performed by unqualified repair personnel could result in injury.
•When servicing a tool, use only identical replace- ment parts. Follow instructions in the Maintenance Section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electrical shock or injury.
•Follow instructions for changing accessories. Accidents are caused by poorly maintained tools.
•Provide proper cleaning. Remove battery before cleaning. Do not use liquid cleaners or aerosol clean- ers. Use a damp cloth for cleaning.
•Conduct a safety check. Upon completion of any ser- vice or repair of this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.
•Damage to the product that requires service. Refer servicing to qualified service personnel under any of the following conditions:
•If liquid has been spilled or objects have fallen into product;
•If product does not operate normally by following the operating instructions;
•If the product has been dropped or damaged in any way;
•When the product exhibits a distinct change in per- formance.
CAUTION
Remove batteries entirely before shipping.
If you have any questions regarding the service or repair of this machine, call or write to:
Ridge Tool Company Technical Service Department 400 Clark Street
Elyria, Ohio
On the Web: www.ridgid.com or www.navitrack.com
In any correspondence, please give all the information shown on the nameplate of your tool including model
number and serial number and software version (See Figure 1).
Specific Safety Information
WARNING
Read this operator’s manual carefully before using the NaviTrack II. Failure to understand and follow the contents of this manual may result in electrical shock, fire and/or severe personal injury.
Call the Ridge Tool Company, Technical Service De- partment at (800)
Important Notice
The NaviTrack II is a diagnostic tool that senses elec- tromagnetic fields emitted by objects underground. It is meant to aide the user in locating these objects by rec- ognizing characteristics of the field lines and displaying them on the screen. As electromagnetic field lines can be distorted and interfered with, it is important to verify the location of underground objects before digging.
Several utilities may be underground in the same area. Be sure to follow local guidelines and one call service procedures.
Exposing the utility is the only way to verify it’s ex- istence, location and depth.
Ridge Tool Co., its affiliates and suppliers, will not be liable for any injury or any direct, indirect, incidental or consequential damages sustained or incurred by reason of the use of the NaviTrack II.
Specifications and
Standard Equipment
Specifications
Weight w/batteries | 5.2 lbs. (2.35 kg.) |
Weight w/o batteries | 4.5 lbs. (2.04 kg.) |
Dimensions: |
|
Length | 15.0″ (38.1 cm.) |
Width | 7.2″ (18.3 cm.) |
Height (Extended) | 31.1″ (78.9 cm.) |
Height (Closed) | 19.1″ (48.5 cm.) |
Power Source | 4 |
| Alkaline (ANSI/NEDA 14A, |
| IEC LR14) or 1.2V NiMH or |
| NiCad rechargeable batteries |
Power Rating: | 6V, 550mA |
Ridge Tool Company | 3 |
