Homelite UT32600, UT32650 manuel dutilisation Maintenance

Page 13

MAINTENANCE

WARNING:

When servicing, use only identical Homelite replacement parts. Use of any other parts may create a hazard or cause product damage.

WARNING:

Always wear eye protection with side shields marked to comply with ANSI Z87.1, along with hearing protection. Failure to do so could result in objects being thrown into your eyes and other possible serious injuries.

WARNING:

Before inspecting, cleaning, or servicing the machine, shut off engine, wait for all moving parts to stop, and disconnect spark plug wire and move it away from spark plug. Failure to follow these instructions can result in serious personal injury or property damage.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, lubricant, grease, etc.

WARNING:

NOTE: Make sure the arrows on the spool are aligned with the eyelets in the string head housing. Push down and hold the spool and housing together while complet- ing the installation.

Reinstall the spool retainer to secure.

To install the spool retainer:

Turn the spool retainer clockwise for 26CS.

Turn the spool retainer counterclockwise for 26SS.

Install string as described in String Replacement.

STRING REPLACEMENT

See Figures 12 - 14.

Stop the engine and disconnect the spark plug wire.

Rotate the spool clockwise as necessary to align the arrows on the spool with the eyelets in the string head housing.

nCut one piece of trimmer line 15 ft. long. Insert the line into the eyelet on the string trimmer housing. Push until the end of the line comes out the other side of the string head. Pull the line from the other side until equal amounts of line appear on both sides of the spool.

Rotate the spool clockwise to wind the string on the spool until approximately 6 in. of line is showing on each side.

Push the spool retainer down while pulling on string(s) to manually advance the string and to check for proper assembly of the string head.

CLEANING THE EXHAUST PORT

Do not at any time let brake fluids, gasoline, petroleum- based products, penetrating lubricants, etc., come in con- tact with plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury.

You can often make adjustments and repairs described here. For other repairs, have the trimmer serviced by an authorized service dealer.

SPOOL REPLACEMENT reel-Easy™ Tap ­Advance System

See Figures 11 - 12.

If replacing string only, refer to String Replacement later in this manual.

Use only .080 in. diameter trimmer line.

Stop the engine and disconnect the spark plug wire. Hold the string head and unscrew the spool retainer.

To remove the spool retainer:

Turn the spool retainer counterclockwise for 26CS. Turn the spool retainer clockwise for 26SS.

Remove the empty spool from the string head.

NOTE: It is not necessary to remove the string head housing from the drive shaft.

Insert the new spool into the string head.

Depending on the type of fuel used, the type and amount of lubricant used, and/or your operating conditions, the exhaust port may become blocked with carbon deposits. If you notice a power loss with your gas powered tool, you may need to remove these deposits to restore performance. We highly recommend that only qualified service technicians perform this service.

SPARK ARRESTOR

The spark arrestor must be replaced every 50 hours or yearly to ensure proper performance of the product. Spark arres- tors may be in different locations depending on the model purchased. Please contact the nearest service dealer for the location of the spark arrestor for your model.

CLEANING THE AIR FILTER SCREEN

See Figures 15 - 16.

For proper performance and long life, keep air filter screen clean.

Remove the air filter cover by pushing down on the latches while gently pulling off the cover.

Rotate choke plate to reveal filter screen.

Brush the air filter screen lightly to clean.

Replace the air filter cover by inserting the tabs on the bottom of the cover into the slots on the air filter base; push the cover up until it latches securely in place.

Page 9 — English

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Save this Manual for Future Reference Manuel D’UTILISATION Manual DEL OperadorALL Versions Toutes LES VersionsPage 26ss 26CSProper operating Tapa del filtro de aire Table of Contents Specific Safety Rules General Safety RulesRead all instructions Symbol Signal Meaning SymbolsAssembly Operation String Head AssemblyFront handle Curved shaft Grass Deflector 26csFuel Mixture Fueling and Refueling the trimmerOxygenated Fuels Filling TankOperating the Trimmer Advancing String Using the reel-EASYTap Advance SystemCutting Tips Advancing the String ManuallyMaintenance When storing 1 month or longer TroubleshootingFuel CAP Spark PlugAir Filter Screen earlier in this Problem Possible Cause SolutionLimited Warranty Statement Warranty13 English This product was manufactured with a catalyst muffler Emissions Maintenance Schedule and Warranted Parts ListAIR Filter Assy Fuel Tank AssyRègles DE Sécurité Particulières Règles DE Sécurité GénéralesAVERTISSEMENT  Lire Toutes LES InstructionsSymbole Nom SymbolesExplication 4 FrançaisAssemblage Avertissement UtilisationDéflecteur D’HERBE Pour Arbre Droit Avertissement AVERTISSEMENT Carburants Oxygénés Approvisionnement EN Carburant Mélange DE CarburantRemplissage DU Réservoir Démarrage ET ArrêtAconseils DE Coupe Utilisation DU TAILLE-BORDURESAvance Manuelle DE LA Ligne DE Coupe Lame Coupe LigneEntretien Bouchon DU Réservoir DE Carburant AVERTISSEMENT  DépannageBougie Remisage du taille-borduresNettoyage du filtre à air , plus haut Rebobiner. Voir Remplacement de la11 Français Déclaration DE Garantie Limitée Garantie12 Français Durée DE LA Garantie DU Fabricant 13 Français14 Français ’AIDE?Reglas DE Seguridad Específicas Reglas DE Seguridad GeneralesAdvertencia Lea todas las instruccionesPeligro SímbolosPrecaución Página 4 EspañolArmado CaracterísticasConjunto del cabezal del hilo FuncionamientoDeflector DE Pasto del eje curvo 26cs Deflector de pasto del eje recto 26ssLlenado DEL Tanque Mezcla DE CombustibleArranque Y Apagado Combustible AceiteConsejos Para Recortar Manejo DE LA RecortadoraAvance Manualmente EL Hilo Cuchilla DE Corte DEL HiloMantenimiento Tapa DEL Tanque DE Combustible Advertencia Corrección DE ProblemasBujía Almacenamiento de la recortadoraPágina 11 Español Reabastecimiento del hilo arriba enDeclaración DE LA Garantía Limitada GarantíaPágina 12 Español Página 13 Español GarantíaPágina 14 Español Este producto se fabricó con un silenciador catalíticoPage Manuel D’UTILISATION Manual DEL Operador OPERATOR’S Manual26CS UT32600 26SS UT32650

UT32600, UT32650 specifications

The Homelite UT32650 and UT32600 are standout gas-powered string trimmers designed to meet the needs of both amateur gardeners and seasoned landscapers. These models are primarily recognized for their robust performance, user-friendly features, and innovative technologies that enhance the overall trimming experience.

One of the standout features of the UT32650 and UT32600 is their lightweight design, which allows for easy maneuverability and reduces user fatigue during extended use. This is particularly important for homeowners and landscape professionals who need to tackle large properties or long hours of work. The ergonomic handle provides a comfortable grip, further enhancing user comfort.

Both models are powered by dependable 26cc two-cycle engines, delivering impressive cutting power while remaining relatively fuel-efficient. This power enables users to handle tougher weeds and brush with relative ease, making them ideal for diverse cutting activities. The easy-start technology incorporated into these trimmers simplifies the ignition process, reducing the hassle associated with starting gas-powered tools.

Another key feature is the automatic line advancement system, which ensures that the cutting line is always exposed at the optimal length for efficient trimming. This automatic feed reduces downtime, allowing users to focus on the task at hand without the need for frequent manual adjustments. The dual-line cutting head is designed to deliver a clean and precise cut, promoting a healthier lawn.

The UT32650 and UT32600 also boast a robust construction that can withstand the rigors of outdoor use. The durable materials used in their manufacturing ensure longevity and reliability, which is essential for any professional tool. Moreover, these models come with adjustable shaft lengths, allowing users to customize the tool to their height for an improved working posture.

In summary, the Homelite UT32650 and UT32600 string trimmers combine lightweight design, potent two-cycle engines, and user-friendly features to create a powerful and efficient gardening tool. With their innovative technologies, including easy start systems and automatic line feeding, they make lawn care simpler and more effective. Whether for residential maintenance or professional landscaping tasks, these trimmers are equipped to handle a variety of challenges, ensuring that your outdoor spaces remain well-manicured and beautiful.
Top Page Image Contents