Husqvarna 335FR manual KEY to Symbols, Operator of the machine must Ensure, while working, that no

Page 2

KEY TO SYMBOLS

Symbols

WARNING! Clearing saws, brushcutters and trimmers can be dangerous! Careless or incorrect use can result in serious or fatal injury to the operator or others.

Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.

Always wear:

A protective helmet where there is a risk of falling objects

• Approved hearing protection

• Approved eye protection

Max. speed of output shaft, rpm

Only use non-metallic, flexible cutting attachments, i.e. trimmer heads with trimmer cord.

Starting instructions

1.

2.

3.3

2

1

4.

5.

Watch out for thrown objects and ricochets.

The operator of the machine must

 

 

ensure, while working, that no

15 m

15 m

persons or animals come closer than

50FT

50FT

15 metres.

Machines fitted with saw blades or

grass blades can be thrown violently

to the side when the blade comes into contact with a fixed object. The blade is capable of amputating an arm or leg. Always keep people and

animals at least 15 metres from the machine.

Arrows which show limits for handle positioning.

Always wear approved protective gloves.

Wear sturdy, non-slip boots.

Other symbols/decals on the machine refer to special certification requirements for certain markets.

The engine is switched off by moving

the stop switch to the stop position. CAUTION! The stop switch automatically returns to the start position. In order to prevent unintentional starting, the spark plug

cap must be removed from the spark plug when assembling, checking and/or performing maintenance.

Always wear approved protective gloves.

Regular cleaning is required.

Visual check.

Approved eye protection must always be used.

The engine exhaust from this product contains chemical known to the State of California to cause cancer, birth defects or other reproductive harm.

2 – English

Image 2
Contents 333R 335FR 335RX-series Operator of the machine must Ensure, while working, that no KEY to SymbolsSymbols Persons or animals come closer thanContents Introduction Dear customerWhat is WHAT? What is what on the clearing saw?General Safety Precautions Personal protective equipmentMachine′s safety equipment Throttle lockoutVibration damping system Stop switchCutting attachment guard 335RX, 335FRMuffler Cutting equipment Cutting equipmentLocking nut General rulesSharpening grass cutters and grass blades Sharpening the saw bladeTrimmer head Assembling the handlebar and throttle AssemblyRX,FR R Assembling the cutting equipmentFitting a blade guard, grass blade and grass cutter Fitting the blade guard and saw bladeShielded by the blade guard when doing this. Always Fitting other guards and cutting attachmentsTriobalance harness Adjusting the harness and clearing sawStandard harness Correct balance Fuel Fuel safetyFuel Handling Fueling MixingStarting and stopping Starting and StoppingCheck before starting StartingStarter cord around your hand For throttle handles with a start throttle lockStopping General working instructions Basic safety rulesWorking Techniques ABC of clearingForestry clearing using a saw blade Brush cutting with a saw blade Grass clearing using a grass blade Grass trimming with a trimmer headMaintenance CarburetorLow speed jet L Fine adjustment of the idle speed TCorrectly adjusted carburetor High speed jet HAdjusting the start throttle speed MufflerBevel gear Cleaning the air filterCooling system Air filterSpark plug Maintenance schedule Maintenance Daily Weekly MonthlyTechnical Data Technical dataApproved accessories Type Cutting attachment guard, Art. no Your Warranty Rights and Obligations Emission Warranty Parts List Page S35 2,7mm 095-.106 25 m 15 cm T35, T35x T45, T45x Auto Trimmy SII Page 1151115-95