Black & Decker AF-100, 90563738 Maintenance, Battery Recycling and the Rbrc Seal, Accessories

Page 7

90563738 NST1024.qxd: chainsaw booklet new 5/25/10 1:13 PM Page 12

In case of jams and tangled line unwrap about one foot (30cm) of line to ensure that it is undamaged. If it is OK rewind it and insert the line end through the eyelet in the spool hub, as shown in figure O.

Pull the line through the hole to maintain tension while placing the spool down into the hub with the notched side exposed, as shown in figure P.

O

AF-100 Spool

P

tangled more frequently than Black & Decker factory wound spools.

Black & Decker recommends to use factory wound spools for optimal tool performance.

To install bulk line, follow the steps below.

Turn off the trimmer and remove the battery.

Press the release tabs on the line spool cover, as shown in figure N and remove the cover by pulling it straight off.

Remove the spool from the tool and remove and discard all line on the spool.

• Insert one end of the bulk line into the Q hole in the spool shown in

figure Q about 1/2 in. (12mm).

• Hold the line in the hole and pull the rest of the line through the slot in the spool, shown in figure Q.

• Snugly and evenly wind the bulk line onto the spool in the direction of the arrow on spool in figure Q until it is nearly full.

• Insert the line end through the eyelet

in the spool hub, as shown in figure O. Pull the line through the hole to

CLEANING

Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.

ACCESSORIES

Recommended accessories for use with your tool are available from your local dealer or authorized service center. If you need assistance regarding accessories, please call: 1-800-544-6986.

Use Black & Decker replacement spool No. AF-100. This line is available at your local dealer or authorized service center.

Spool cap replacement part no. RC-100-P.

Reload nylon line (either bulk or prewrapped replacement spool) as shown in this manual.

USE ONLY .065 inch (1.65mm) DIAMETER NYLON MONOFILAMENT LINE. Heavier line will overload the motor, cause overheating and will impair the automatic feed.

Do not use fishing line or other lines that are not recommended.

WARNING: The use of any accessory not recommended for use with this tool could be hazardous.

Service Information

has established programs in the United States and Canada to facilitate the collection of spent nickel-cadmium batteries. Help protect our environment and conserve natural resources by returning the spent nickel-cadmium battery to an authorized Black & Decker service center or to your local retailer for recycling. You may also contact your local recycling center for information on where to drop off the spent battery, or call 1-800-8-BATTERY.

Full Two -Year Home Use Warranty

Black & Decker (U.S.) Inc. warrants this product for two years against any defects in material or workmanship. The defective product will be replaced or repaired at no charge in either of two ways:

The first, which will result in exchanges only, is to return the product to the retailer from whom it was purchased (provided that the store is a participating retailer). Returns should be made within the time period of the retailerʼs policy for exchanges (usually 30 to 90 days after the sale). Proof of purchase may be required. Please check with the retailer for their specific return policy regarding returns that are beyond the time set for exchanges.

The second option is to take or send the product (prepaid) to a Black & Decker owned or authorized Service Center for repair or replacement at our option. Proof of purchase may be required.

Press the spool down GENTLY and rotate it until you feel it drop into place. (When in place, the spool will turn a few degrees left and right freely.)

Snap the spool cover back on, insert the battery and turn the tool on. In a few seconds or less youʼll hear the nylon line being cut automatically to the proper length.

For trouble free feeding and best results, only use Black &

Decker replacement spools with single 0.065 inch line. Black & Decker replacement spool model number AF-100.

REWINDING SPOOL FROM BULK LINE (USE ONLY .065 INCH DIAMETER LINE)

Bulk line is also available for purchase from your local retailer. NOTE: Hand wound spools from bulk line are likely to become

12

maintain tension while placing the spool down into the hub with the

notched side exposed, as shown in figure P.

• Press the spool down GENTLY and rotate it until you feel it drop into

place. (When in place, the spool will turn a few degrees left and right

freely.)

• Snap the spool cover back on, insert the battery and turn the tool on.

In a few seconds or less youʼll hear the nylon line being cut

automatically to the proper length.

MAINTENANCE

WARNING: Remove battery pack before servicing, cleaning or removing material from the gardening appliance.

Whether you need technical advice, repair, or genuine factory replacement parts, contact the Black & Decker location nearest you. To find your local service location, refer to the yellow page directory under "Tools–Electric" or call: 1-800-54-HOW TO (544-6986).

Battery Recycling and the RBRC™ Seal

The RBRC™ (Rechargeable Battery Recycling Corporation) Seal on the nickel-cadmium battery (or battery pack) indicates that the costs to recycle the battery (or battery pack) at the end of its useful life have already been paid by Black & Decker. In some areas, it

is illegal to place spent nickel-cadmium batteries in the trash or municipal solid waste stream and the RBRC program provides an environmentally conscious alternative.

RBRC in cooperation with Black & Decker and other battery users,

13

Black & Decker owned and authorized service centers are listed under "Tools–Electric" in the yellow pages of the phone directory. This warranty does not apply to accessories. This warranty gives you specific legal rights and you may have other rights which vary from state to state. Should you have any questions, contact the manager of your nearest Black & Decker Service Center. This product is not intended for commercial use.

FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are missing, call 1-800-544-6986 for a free replacement.

LATIN AMERICA: This warranty does not apply to products sold in Latin America. For products sold in Latin America, check country specific warranty information contained in the packaging, call the local company or see the website for warranty information.

Image 7
Contents For trouble free feeding and best results, only use KEY Information YOU should KnowAF-100 Rotating Line Performs a Cutting Function Safety Guidelines DefinitionsAdditional Important Safety Instructions To Reduce Risk of InjuryCharging Charging ProcedureExtension Cord Double InsulationRead ALL Instructions Battery Cap InformationAssembly Assembly InstructionsOperating Instructions Line Feeding Power Command TM FeatureEdging Mode Operating the TrimmerBattery Recycling and the Rbrc Seal MaintenanceAccessories Voici DES Renseignements Importants a Connaitre Problem Possible Cause Possible SolutionRanger LES Appareils Inutilisés À L’INTÉRIEUR Lignes Directrices EN Matiere DE Securite DefinitionsÉviter LES Conditions Environnementales Reduction DES Risques ET DES BlessuresChargement DE LA Pile Importantes Directives Supplémentaires DE SécuritéCordons de rallonge Double isolationOù la température ambiante se situe entre 4.5 C 40 F et Procedure DE RechargeLire Toutes LES Directives Information concernant le capuchon du bloc-pileEnsemble DE Piles Dans LE Chargeur Directives DE MontageAssemblage BLOCS-PILES DE 18 ET DE 24 VoltsFonctionnement Alimentation DU FIL Remplacement DE LA BobineEntretien AccessoiresLe recyclage des piles rechargeables et le sceau Srprcmc Informacion Clave QUE Usted Debe Conocer Problème Cause possible Solution possiblePara Reducir EL Riesgo DE Lesiones Pautas DE SEGURIDAD/DEFINICIONESUtilice LA Vestimenta Adecuada No utilice ropa holgada Carga DE LA Batería Instrucciones DE Seguridad Adicionales ImportantesCable Prolongador Doble aislamientoVez durante 11 horas Después de la carga inicial LEA Todas LAS InstruccionesProcedimiento DE Carga Información acerca del protector de la bateríaColocación DEL Protectorb Instrucciones Para EL MontajeEnsamblaje Paquetes DE Baterías DE 18 Y 24 VoltiosInstrucciones DE Operacion Alimentacion DE LA Cuerda En la Figura LReemplazo DEL Carrete Reciclado DE Baterias Y EL Sello Rbrc Problema Causa posible Solución posibleMantenimiento AccesoriosEsta Garantia no Aplica Cuando Informacion DE MantenimientoGarantia Completa DE DOS Anos Para USO EN EL Hogar Años DE GarantiaSolamente Para Propositos DE Mexico
Related manuals
Manual 16 pages 35.89 Kb

NST1024, AF-100, 90563738 specifications

The Black & Decker NST1024 is a strong contender in the world of cordless string trimmers, designed to meet the needs of homeowners and landscaping professionals alike. This lightweight model weighs just around 5.5 pounds, making it easily maneuverable for extended periods. Its 24-volt lithium-ion battery offers reliable power and extended run time, enabling users to tackle larger yards without worrying about running out of charge mid-task.

One of the standout features of the NST1024 is its automatic feed spool (AFS) technology. This innovative feature eliminates the need for manual feeding, ensuring that the cutting line is always at optimal length for maximum efficiency. As the line wears down, the AFS system automatically releases additional line, allowing users to focus on their trimming tasks without interruptions.

The Black & Decker NST1024 is equipped with a 12-inch cutting swath, providing a good balance between maneuverability and coverage. This size is particularly advantageous when working in tight spaces or around flower beds and ornamental landscaping. The adjustable height is another practical feature; users can customize the trimmer’s height for comfort and optimal control, reducing fatigue during longer sessions.

Another noteworthy characteristic of this model is its convertibility. The NST1024 can easily transition from trimming to edging with a simple rotation of the handle, showcasing its versatility for various landscaping tasks. This dual-functionality not only saves time but also minimizes the need for multiple tools.

Additionally, the NST1024 is designed with a soft grip handle, enhancing comfort during use and reducing vibrations. The lightweight design combined with ergonomic features maximizes ease of use, making it ideal for users of all experience levels.

Black & Decker has long been recognized for its durability and reliability, and the NST1024 upholds this reputation. The robust construction ensures longevity, while the ease of use facilitates the perfect trim every time. Overall, the Black & Decker NST1024 truly stands out in the cordless string trimmer market, combining innovative technology with user-friendly features to create an efficient and practical gardening tool.