Snapper LT200H481BV2 Starting & Operation 2,3.2, Starting Wheel Drive, Stopping Wheel Drive

Section 2 - OPERATING INSTRUCTIONS

2,3 STARTING & OPERATION (Continued) 2,3.2, STARTING WHEEL DRIVE

1.Shift speed control lever to neutral.

2, Start engine. Refer to Section "STARTING ENGINE".

3.Release clutch/brake pedal.

4.Slowly shift speed control lever forward for forward motion or to the rear for reverse motion. See

Figure 2.7.

SPEED CONTROL LEVER

FIGURE 2,7

2,3.3 STARTING MOWER BLADE

2,4 STOPPING ENGINE, BLADE, WHEEL DRIVE 2,4.1. STOPPING ENGINE

1.Stop engine by turning key to the "OFF" position. See Figure 2.9.

KEY

FIGURE 2.9

2,4.2. STOPPING WHEEL DRIVE

1.Fully depress clutch/brake pedal to stop wheel drive. See Figure 2.10.

CLUTCH/BRAKE

PEDAL

1.Start engine. Refer to Section "STARTING ENGINE".

2, Pull blade switch OUT to engage blade. See Figure 2.8.

PUSH BLADE SWITCH IN TO

THE "OFF" POSITION

PULL BLADE	FULLY DEPRESS
	CLUTCH/BRAKE	PEDAL TO
SWITCH OUT TO	STOP WHEEL	MOTION
THE "ON"
POSITION

FIGURE 2.10

FIGURE 2,8

Ik WARNING

DO NOT operate blades in reverse. STOP BLADES. I

LOOK and SEE behind and down for children, pets I

and hazards before and while backing. I

8