Snapper 285Z manual Adjustments and Service, Speed Balancing Adjustment, Seat Adjustments

Page 22

Adjustments and Service

A

A

B

B

Figure 14. Ground Speed Lever Adjustments

 

 

 

Speed Balancing Adjustment

 

 

 

If the rider drifts to the right or left when the ground speed

Figure 13. Seat Adjustment

 

 

 

levers are in the maximum forward position, the top speed of

 

 

 

each of these levers can be bala ced. Only adjust the speed of

Seat Adjustments

 

 

the wheel that is traveli g faster.

 

 

To Reduce the Speed f the Faster Wheel

The seat and ground speed levers should be adjusted so that

 

1.

L sen the b lt secur ng the forward adjust plate (B,

operator’s elbows are supported by the arm rests when his/her

 

 

 

Figure 14).

hands are on the controls, and the ground speed levers can be

 

 

 

2.

Slide the plate up approximately 1/8”.

moved through their full range of motion without c n ac ing

the operator’s legs.

 

3.

Retighten the bolt and recheck speed balance.

Seat Position Adjustment

 

4.

Repeat steps 1-3 until adjustment is complete.

Lift the seat adjustment lever (A, Figure 13). Slide the seat

 

 

 

 

 

forward or backward to the desired position, then lower the

 

 

 

WARNING

 

seat adjustment lever. Make sure the lever locks into the

 

 

 

 

 

locking slots (B) in the seat base.

 

 

 

DO NOT adjust the rider for a faster overall speed forward or

 

 

 

 

Ground Speed Lever Adjustment

 

 

 

reverse than it was designed for.

 

 

 

 

 

 

To Adjust the Handle Height: Remove the ground sp

l v

 

 

 

 

 

mounting hardware (A, Figure 14) and reposition the lever

 

 

 

 

 

either up or down from its original position. eplace the

 

 

 

 

 

 

hardware.Reproduction

22

www.Snapper.com

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Not For Manual No Rev ‘A’, 6/14/2010Identification Numbers Service, or information you Must have these numb rsUnit ID Tag Table of Contents Operator’s manual contains important safety information Operator SafetyOperating Safety Read the ManualThrown Objects Slope OperationMoving Parts Retaining Walls, Drop-offs, and Water Fuel and MaintenanceEnclosed Areas Protection for Children Protection Against Tipovers Preparation Protection Against TipoversSafe Handling of Gasoline Preparation OperationEmissions Towing Maintenance Decal, Caution Safety and Instructional DecalsDecal, Warning Safety Interlock System Operational Safety ChecksControl Functions Features and ControlsGround Speed Levers PTO Switch Hour Meter Ignition SwitchMower Cutting Height Adjustment Switch Seat Adjustment LeverChecks Before Starting General Operating SafetyOperation Before first time operationStopping the Rider and Engine Starting the EngineMowing Forward Reverse Travel Zero Turn Smooth Travel Driving PracticeForward Travel Practice Reverse Travel Practice Levers GraduallyTurning In-Place Practice Turning In PlaceAllows you to turn around at the end of a cutting Attaching a Trailer 20’ 6mMaintenance Maintenance ChartFuel Filter Engine MaintenanceAfter installation Ver-filling and wipe up anyNever store the unit with fuel in an enclosed, poorly Precautions may result in serious injury or deathStorage Source such as a furnace, water heater, etc. and cause anSeat Adjustments Adjustments and ServiceSpeed Balancing Adjustment Ground Speed Lever AdjustmentRemoval Cutting Height AdjustmentMower Removal and Installation Tion indicated by the arrow, and remove the mower beltWith a washer and hairpin clip a InstallationTion indicated, and install the belt onto the PTO pulley as Washer and hairpin clip aPerform the following procedure if the clutch is slipping PTO Clutch AdjustmentPTO Clutch Adjustment Blade Brake CheckMower Deck Leveling Right side shown, left side hiddenDamaged, it must be replaced Remove mower deck see Mower Deck RemovalFig re 27. Balancing The Blade Front caster wheel axles LubricationGrease OilBattery Maintenance Battery ChargingTroubleshooting Troubleshooting the RiderTroubleshooting Warranty Warranty PeriodNot For Not For Not For Replacement Parts SpecificationsDimensions Chassis Maintenance Items

285Z specifications

The Snapper 285Z is a robust and versatile zero-turn mower designed for efficient lawn care, making it an excellent choice for both homeowners and landscaping professionals. Renowned for its reliability and performance, the Snapper 285Z stands out in the competitive market of outdoor power equipment.

One of the main features of the Snapper 285Z is its powerful engine options. Equipped with a high-performance, commercial-grade engine, it delivers outstanding torque and power to tackle various mowing conditions. This ensures that users can easily mow through tough grass and uneven terrains without bogging down. The engine is designed for easy starting and smooth operation, contributing to the overall user experience.

The patented zero-turn technology of the Snapper 285Z allows for unparalleled maneuverability. With its dual-lever steering system, operators can easily turn in tight spaces and navigate around obstacles with confidence. This feature significantly reduces mowing time and enhances efficiency, making it ideal for residential lawns, commercial properties, and intricate landscaping designs.

The Snapper 285Z also boasts an adjustable cutting deck, with widths typically ranging from 48 to 52 inches, allowing users to choose the perfect size for their mowing needs. The deck is constructed from durable steel, ensuring longevity and resistance to wear and tear. Additionally, the cutting height can be quickly adjusted, offering versatility for different grass types and seasonal growth patterns.

Another notable characteristic of the Snapper 285Z is its user-friendly design. With a comfortable seat, ergonomic controls, and an easy-to-read instrument panel, it promotes a pleasant mowing experience. The mower is also equipped with an electric start feature, eliminating the need for pull cords and enhancing ease of use.

Safety is a top priority with the Snapper 285Z, featuring roll-over protection and safety switches that ensure the mower shuts down when the operator leaves the seat. This attention to safety not only protects the user but also adds to the mower's overall reliability.

In summary, the Snapper 285Z combines powerful performance, innovative technology, and user-focused features to offer an exceptional mowing experience. Its zero-turn capability, durable construction, and adjustable cutting options make it a top choice for anyone looking to maintain a beautiful lawn efficiently.
Top Page Image Contents