Snapper 285Z manual Towing Maintenance

Page 9

Operator Safety

Towing

 

 

Maintenance

1.

Tow only with a machine that has a hitch designed for tow-

(Continued From Previous Column)

 

ing. DO NOT attach towed equipment except at the hitch

6. Always provide adequate ventilation when running engine.

 

point.

 

 

Exhaust gases contain carbon monoxide, an odorless and

2.

Follow the manufacturer's recommendation for weight lim-

deadly poison.

 

its for towed equipment and towing on slopes.

 

7. Disconnect negative (black) cable from battery before

3.

DO NOT allow children or others on towed equipment.

performing maintenance or service. Cranking engine could

4.

On slopes, the weight of the towed equipment may cause

cause injury.

 

loss of traction and loss of control.

 

8. DO NOT work under machine without safety blocks.

5.

Travel slowly and allow extra distance to stop.

 

9. Service engine and make adjustments only when engine is

 

 

 

 

stopped. Remove spark plug wire(s) from spark plug(s)

Maintenance

 

 

and secure wire(s) away from spark plug(s).

1.

DO NOT store machine or fuel container inside where

 

10. DO NOT change engine governor speed settings or over-

 

fumes may reach an open flame, spark or pilot light such

speed engine.

 

as in a water heater, furnace, clothes dryer or other gas

11. Lubricate machine at intervals specified in manual to

 

appliance. Allow engine to cool before storing machine in

prevent controls from binding.

 

an enclosure. Store fuel container out of the reach of chil-

12. Mower blades are sharp and can cut. Wrap the blades or

 

dren in a well ventilated, unoccupied building.

 

wear heavy leather gloves and use CAUTION when handling

2.

 

Reproduction

Keep engine free of grass, leaves or excess grease to

 

them.

 

reduce fire hazard and engine overheating.

 

13. DO NOT test for spark by grounding spark plug next to

3.

When draining fuel tank, drain fuel into an approved

n-

spark plug h le; spark plug could ignite gas exiting engine.

 

tainer outdoors and away from open flame.

 

14. Have mach ne serviced by an authorized dealer at least

4.

Check brakes frequently; adjust, repair or replace as need-

once a year and have the dealer install any new safety

 

ed.

 

 

devi es.

5.

Keep all bolts, nuts and screws properly tight. Check

hat

15. Maintain or replace safety and instruction labels as

 

all cotter pins are in proper position.

 

ne essary.

 

 

 

 

16. Use only genuine replacement parts to assure that original

 

 

 

 

standards are maintained.

 

WARNING

 

 

 

 

WARNING

 

 

 

 

 

 

 

 

Grass Catcher bags used on this product are made of woven

 

 

 

 

 

 

 

 

 

Engine exhaust, some of its constituents, and certain

 

fabric, and are subject to deterioration and wear during

 

 

 

vehicle components contain or emit chemicals known to

 

normal usage. Check condition of bags before each use.

 

 

 

the State of California to cause cancer or other reproductive

 

Immediately replace worn or damaged catcher bags with only

 

 

 

harm.

 

bags recommended by the manufacturer. The Grass Catcher is

 

 

 

 

 

 

 

 

 

 

 

 

 

 

optional equipment on some models.

 

 

 

 

 

 

 

 

 

 

 

 

WARNING

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Battery posts, terminals and related accessories contain

 

 

 

 

 

 

lead and lead compounds, chemicals known to the State

 

 

 

 

 

 

of California to cause cancer and birth defects or other

 

 

 

 

 

 

reproductive harm. Wash hands after handling.

 

 

 

 

 

 

 

 

 

9

Image 9
Contents Manual No Rev ‘A’, 6/14/2010 Not ForService, or information you Must have these numb rs Identification NumbersUnit ID Tag Table of Contents Operating Safety Operator SafetyOperator’s manual contains important safety information Read the ManualSlope Operation Thrown ObjectsMoving Parts Fuel and Maintenance Retaining Walls, Drop-offs, and WaterEnclosed Areas Preparation Protection Against Tipovers Protection for Children Protection Against TipoversPreparation Operation Safe Handling of GasolineEmissions Towing Maintenance Safety and Instructional Decals Decal, CautionDecal, Warning Operational Safety Checks Safety Interlock SystemFeatures and Controls Control FunctionsGround Speed Levers Mower Cutting Height Adjustment Switch Ignition SwitchPTO Switch Hour Meter Seat Adjustment LeverOperation General Operating SafetyChecks Before Starting Before first time operationStarting the Engine Stopping the Rider and EngineMowing Forward Travel Practice Reverse Travel Practice Zero Turn Smooth Travel Driving PracticeForward Reverse Travel Levers GraduallyPractice Turning In Place Turning In-PlaceAllows you to turn around at the end of a cutting 20’ 6m Attaching a TrailerMaintenance Chart MaintenanceAfter installation Engine MaintenanceFuel Filter Ver-filling and wipe up anyStorage Precautions may result in serious injury or deathNever store the unit with fuel in an enclosed, poorly Source such as a furnace, water heater, etc. and cause anSpeed Balancing Adjustment Adjustments and ServiceSeat Adjustments Ground Speed Lever AdjustmentMower Removal and Installation Cutting Height AdjustmentRemoval Tion indicated by the arrow, and remove the mower beltTion indicated, and install the belt onto the PTO pulley as InstallationWith a washer and hairpin clip a Washer and hairpin clip aPTO Clutch Adjustment PTO Clutch AdjustmentPerform the following procedure if the clutch is slipping Blade Brake CheckRight side shown, left side hidden Mower Deck LevelingRemove mower deck see Mower Deck Removal Damaged, it must be replacedFig re 27. Balancing The Blade Grease LubricationFront caster wheel axles OilBattery Charging Battery MaintenanceTroubleshooting the Rider TroubleshootingTroubleshooting Warranty Period WarrantyNot For Not For Not For Dimensions Chassis SpecificationsReplacement Parts Maintenance Items

285Z specifications

The Snapper 285Z is a robust and versatile zero-turn mower designed for efficient lawn care, making it an excellent choice for both homeowners and landscaping professionals. Renowned for its reliability and performance, the Snapper 285Z stands out in the competitive market of outdoor power equipment.

One of the main features of the Snapper 285Z is its powerful engine options. Equipped with a high-performance, commercial-grade engine, it delivers outstanding torque and power to tackle various mowing conditions. This ensures that users can easily mow through tough grass and uneven terrains without bogging down. The engine is designed for easy starting and smooth operation, contributing to the overall user experience.

The patented zero-turn technology of the Snapper 285Z allows for unparalleled maneuverability. With its dual-lever steering system, operators can easily turn in tight spaces and navigate around obstacles with confidence. This feature significantly reduces mowing time and enhances efficiency, making it ideal for residential lawns, commercial properties, and intricate landscaping designs.

The Snapper 285Z also boasts an adjustable cutting deck, with widths typically ranging from 48 to 52 inches, allowing users to choose the perfect size for their mowing needs. The deck is constructed from durable steel, ensuring longevity and resistance to wear and tear. Additionally, the cutting height can be quickly adjusted, offering versatility for different grass types and seasonal growth patterns.

Another notable characteristic of the Snapper 285Z is its user-friendly design. With a comfortable seat, ergonomic controls, and an easy-to-read instrument panel, it promotes a pleasant mowing experience. The mower is also equipped with an electric start feature, eliminating the need for pull cords and enhancing ease of use.

Safety is a top priority with the Snapper 285Z, featuring roll-over protection and safety switches that ensure the mower shuts down when the operator leaves the seat. This attention to safety not only protects the user but also adds to the mower's overall reliability.

In summary, the Snapper 285Z combines powerful performance, innovative technology, and user-focused features to offer an exceptional mowing experience. Its zero-turn capability, durable construction, and adjustable cutting options make it a top choice for anyone looking to maintain a beautiful lawn efficiently.