Snapper Shop for Quality 285Z Parts and Learn About Lubrication and Service
Page 28

Adjustments and Service

 

Lubrication

 

Lubricate the unit at the points shown in Figure 29, as well as

 

the others listed in this section.

 

Grease:

2x

• front caster wheel axles

• front caster spindle bosses

 

• front axle center pivot

 

• mower blade spindles *

 

• mower deck idler arm

 

• mower deck lift motor screw (located up under

2x

right fender)

 

Use grease fittings when present. Disassemble parts to apply grease to moving parts when grease fittings are not installed.

Not all greases are compatible. Use automotive-type lithium grease.

* Some blade spindles have grease fittings above the mower

deck, while others have grease fittings below the deck.

Oil:

 

• ground speed lever pivot points

 

• discharge chute hinge

 

• deck lift pivot points

 

Generally, all moving metal parts should be oiled where ntact

is made with other parts. Keep oil and grease off belts and pul-

leys. Remember to wipe fittings and surfaces clean both

before and after lubrication.

Reproduction

 

Figure 29. Lubrication Points (Grease)

28

www.Snapper.com

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Not For Manual No Rev ‘A’, 6/14/2010Identification Numbers Service, or information you Must have these numb rsUnit ID Tag Table of Contents Operator Safety Operating SafetyOperator’s manual contains important safety information Read the ManualThrown Objects Slope OperationMoving Parts Retaining Walls, Drop-offs, and Water Fuel and MaintenanceEnclosed Areas Protection for Children Protection Against Tipovers Preparation Protection Against TipoversSafe Handling of Gasoline Preparation OperationEmissions Towing Maintenance Decal, Caution Safety and Instructional DecalsDecal, Warning Safety Interlock System Operational Safety ChecksControl Functions Features and ControlsGround Speed Levers Ignition Switch Mower Cutting Height Adjustment SwitchPTO Switch Hour Meter Seat Adjustment LeverGeneral Operating Safety OperationChecks Before Starting Before first time operationStopping the Rider and Engine Starting the EngineMowing Zero Turn Smooth Travel Driving Practice Forward Travel Practice Reverse Travel PracticeForward Reverse Travel Levers GraduallyTurning In-Place Practice Turning In PlaceAllows you to turn around at the end of a cutting Attaching a Trailer 20’ 6mMaintenance Maintenance ChartEngine Maintenance After installationFuel Filter Ver-filling and wipe up anyPrecautions may result in serious injury or death StorageNever store the unit with fuel in an enclosed, poorly Source such as a furnace, water heater, etc. and cause anAdjustments and Service Speed Balancing AdjustmentSeat Adjustments Ground Speed Lever AdjustmentCutting Height Adjustment Mower Removal and InstallationRemoval Tion indicated by the arrow, and remove the mower beltInstallation Tion indicated, and install the belt onto the PTO pulley asWith a washer and hairpin clip a Washer and hairpin clip aPTO Clutch Adjustment PTO Clutch AdjustmentPerform the following procedure if the clutch is slipping Blade Brake CheckMower Deck Leveling Right side shown, left side hiddenDamaged, it must be replaced Remove mower deck see Mower Deck RemovalFig re 27. Balancing The Blade Lubrication GreaseFront caster wheel axles OilBattery Maintenance Battery ChargingTroubleshooting Troubleshooting the RiderTroubleshooting Warranty Warranty PeriodNot For Not For Not For Specifications Dimensions ChassisReplacement Parts Maintenance Items

285Z specifications

The Snapper 285Z is a robust and versatile zero-turn mower designed for efficient lawn care, making it an excellent choice for both homeowners and landscaping professionals. Renowned for its reliability and performance, the Snapper 285Z stands out in the competitive market of outdoor power equipment.

One of the main features of the Snapper 285Z is its powerful engine options. Equipped with a high-performance, commercial-grade engine, it delivers outstanding torque and power to tackle various mowing conditions. This ensures that users can easily mow through tough grass and uneven terrains without bogging down. The engine is designed for easy starting and smooth operation, contributing to the overall user experience.

The patented zero-turn technology of the Snapper 285Z allows for unparalleled maneuverability. With its dual-lever steering system, operators can easily turn in tight spaces and navigate around obstacles with confidence. This feature significantly reduces mowing time and enhances efficiency, making it ideal for residential lawns, commercial properties, and intricate landscaping designs.

The Snapper 285Z also boasts an adjustable cutting deck, with widths typically ranging from 48 to 52 inches, allowing users to choose the perfect size for their mowing needs. The deck is constructed from durable steel, ensuring longevity and resistance to wear and tear. Additionally, the cutting height can be quickly adjusted, offering versatility for different grass types and seasonal growth patterns.

Another notable characteristic of the Snapper 285Z is its user-friendly design. With a comfortable seat, ergonomic controls, and an easy-to-read instrument panel, it promotes a pleasant mowing experience. The mower is also equipped with an electric start feature, eliminating the need for pull cords and enhancing ease of use.

Safety is a top priority with the Snapper 285Z, featuring roll-over protection and safety switches that ensure the mower shuts down when the operator leaves the seat. This attention to safety not only protects the user but also adds to the mower's overall reliability.

In summary, the Snapper 285Z combines powerful performance, innovative technology, and user-focused features to offer an exceptional mowing experience. Its zero-turn capability, durable construction, and adjustable cutting options make it a top choice for anyone looking to maintain a beautiful lawn efficiently.
Top Page Image Contents