Snapper 285Z manual Battery Maintenance, Battery Charging

Page 29

Adjustments and Service

Battery Maintenance

Cleaning the Battery and Cables

1.Disconnect the cables from the battery, negative cable first (C, Figure 30).

2.Clean the battery terminals and cable ends with a wire brush until shiny.

3.Reinstall the battery and reattach the battery cables, positive cable first (A).

4.Coat the cable ends and battery terminals with petroleum jelly or non-conducting grease.

5.Be sure to replace the terminal cover (B) over the positive battery terminal.

Battery Charging

B

A

C

A dead battery or one too weak to start the engine may be the

Figure 30. Battery Compartment

 

 

 

 

 

Reproduction

result of a defect in the charging system or other electrical

 

 

 

 

component. If there is any doubt about the cause of the prob-

 

 

 

 

lem, see your dealer. If you need to replace the battery, f

ll w

 

 

WARNING

 

the steps under Cleaning the Battery & Cables in the Regular

 

 

 

 

Maintenance Section.

 

 

 

 

Be

areful when handling the battery. Keep flames and

To charge the battery, follow the instructions

vided by

he

 

sparks away from the battery.

battery charger manufacturer as well as all warnings included

 

When removing or installing battery cables, disconnect the

in the safety rules sections of this book. Rem

ve the battery

 

negative cable FIRST and reconnect it LAST. If not done in this

from the rider and place on a level, non-concrete surface.

 

 

or

er, the positive terminal can be shorted to the frame by a

Charge the battery at 6-10 amps for 1 hour. Do not charge at a

 

tool.

 

 

 

 

rate higher than 10 amps.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WARNING

 

 

 

 

 

 

 

 

 

 

 

 

 

Keep open flames and sparks away from the battery; the

 

 

 

 

 

gasses coming from it are highly explosive. Ventilate the

 

 

 

 

 

battery well during charging.

 

 

 

 

 

 

 

 

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Manual No Rev ‘A’, 6/14/2010 Not ForUnit ID Tag Service, or information you Must have these numb rsIdentification Numbers Table of Contents Operating Safety Operator SafetyOperator’s manual contains important safety information Read the ManualMoving Parts Slope OperationThrown Objects Enclosed Areas Fuel and MaintenanceRetaining Walls, Drop-offs, and Water Preparation Protection Against Tipovers Protection for Children Protection Against TipoversEmissions Preparation OperationSafe Handling of Gasoline Towing Maintenance Decal, Warning Safety and Instructional DecalsDecal, Caution Operational Safety Checks Safety Interlock SystemGround Speed Levers Features and ControlsControl Functions Mower Cutting Height Adjustment Switch Ignition SwitchPTO Switch Hour Meter Seat Adjustment LeverOperation General Operating SafetyChecks Before Starting Before first time operationMowing Starting the EngineStopping the Rider and Engine Forward Travel Practice Reverse Travel Practice Zero Turn Smooth Travel Driving PracticeForward Reverse Travel Levers GraduallyAllows you to turn around at the end of a cutting Practice Turning In PlaceTurning In-Place 20’ 6m Attaching a TrailerMaintenance Chart MaintenanceAfter installation Engine MaintenanceFuel Filter Ver-filling and wipe up anyStorage Precautions may result in serious injury or deathNever store the unit with fuel in an enclosed, poorly Source such as a furnace, water heater, etc. and cause anSpeed Balancing Adjustment Adjustments and ServiceSeat Adjustments Ground Speed Lever AdjustmentMower Removal and Installation Cutting Height AdjustmentRemoval Tion indicated by the arrow, and remove the mower beltTion indicated, and install the belt onto the PTO pulley as InstallationWith a washer and hairpin clip a Washer and hairpin clip aPTO Clutch Adjustment PTO Clutch AdjustmentPerform the following procedure if the clutch is slipping Blade Brake CheckRight side shown, left side hidden Mower Deck LevelingFig re 27. Balancing The Blade Remove mower deck see Mower Deck RemovalDamaged, it must be replaced Grease LubricationFront caster wheel axles OilBattery Charging Battery MaintenanceTroubleshooting the Rider TroubleshootingTroubleshooting Warranty Period WarrantyNot For Not For Not For Dimensions Chassis SpecificationsReplacement Parts Maintenance Items

285Z specifications

The Snapper 285Z is a robust and versatile zero-turn mower designed for efficient lawn care, making it an excellent choice for both homeowners and landscaping professionals. Renowned for its reliability and performance, the Snapper 285Z stands out in the competitive market of outdoor power equipment.

One of the main features of the Snapper 285Z is its powerful engine options. Equipped with a high-performance, commercial-grade engine, it delivers outstanding torque and power to tackle various mowing conditions. This ensures that users can easily mow through tough grass and uneven terrains without bogging down. The engine is designed for easy starting and smooth operation, contributing to the overall user experience.

The patented zero-turn technology of the Snapper 285Z allows for unparalleled maneuverability. With its dual-lever steering system, operators can easily turn in tight spaces and navigate around obstacles with confidence. This feature significantly reduces mowing time and enhances efficiency, making it ideal for residential lawns, commercial properties, and intricate landscaping designs.

The Snapper 285Z also boasts an adjustable cutting deck, with widths typically ranging from 48 to 52 inches, allowing users to choose the perfect size for their mowing needs. The deck is constructed from durable steel, ensuring longevity and resistance to wear and tear. Additionally, the cutting height can be quickly adjusted, offering versatility for different grass types and seasonal growth patterns.

Another notable characteristic of the Snapper 285Z is its user-friendly design. With a comfortable seat, ergonomic controls, and an easy-to-read instrument panel, it promotes a pleasant mowing experience. The mower is also equipped with an electric start feature, eliminating the need for pull cords and enhancing ease of use.

Safety is a top priority with the Snapper 285Z, featuring roll-over protection and safety switches that ensure the mower shuts down when the operator leaves the seat. This attention to safety not only protects the user but also adds to the mower's overall reliability.

In summary, the Snapper 285Z combines powerful performance, innovative technology, and user-focused features to offer an exceptional mowing experience. Its zero-turn capability, durable construction, and adjustable cutting options make it a top choice for anyone looking to maintain a beautiful lawn efficiently.
Top Page Image Contents