Snapper How to Properly Adjust and Service Your Mower Blades
Page 27

Adjustments and Service

 

C

C

 

 

B

B

 

A

A

 

Figure 25. Mower Leveling - Front-to-Back

LOOSEN

Figure 26. Blade Removal

Servicing the Mower Blades

 

 

 

 

 

1.

Remove mower deck (see “Mower Deck Removal”).

 

Workbench

 

2.

WARNING

Reproduction

 

See Figure 26. To remove blade for sharpening, use a

 

 

 

 

block of wood to prevent blade rotation while loosening

 

 

 

 

the hardware.

 

 

 

 

 

3.

Remove the bolt (C, Figure 28), blade washer (B), and

 

 

 

 

blade.

 

 

 

 

 

4.

Use a file to sharpen blade to a fine edge. If blade is

 

 

Nail

 

damaged, it must be replaced.

 

 

Fig re 27. Balancing The Blade

 

5.

Balance the blade as shown in Figure 27. Center the

 

 

 

 

blade’s hole on a nail lubricated with a drop of oil. A

 

 

 

 

balanced blade will remain level.

 

 

 

 

 

6.

Reinstall the blade (Figure 28) with the tabs pointing up

 

 

 

 

toward the mower deck as shown.

 

 

 

 

 

7.

Reinstall the blade washer (B, Figure 28), concave side

 

 

 

 

up, and bolt (C). Use a wooden block (A) to

v nt blade

 

 

 

 

rotation while tightening the hardware. Torque hardware

 

 

 

 

to 50-60 ft-lbs (68-81 N.m.).

 

 

 

 

 

For your personal safety, blade mounting hardware must be

 

 

 

installed with the blade washer, then securely tightened to

 

 

 

50-60 ft-lbs (68-81 N.m.).

 

 

Figure 28.

Blade Installation

 

 

 

 

 

 

WARNING

For your personal safety, do not handle the sharp mower blades with bare hands. Careless or improper handling of blades may result in serious injury.

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Manual No Rev ‘A’, 6/14/2010 Not ForService, or information you Must have these numb rs Identification NumbersUnit ID Tag Table of Contents Read the Manual Operator SafetyOperating Safety Operator’s manual contains important safety informationSlope Operation Thrown ObjectsMoving Parts Fuel and Maintenance Retaining Walls, Drop-offs, and WaterEnclosed Areas Preparation Protection Against Tipovers Protection for Children Protection Against TipoversPreparation Operation Safe Handling of GasolineEmissions Towing Maintenance Safety and Instructional Decals Decal, CautionDecal, Warning Operational Safety Checks Safety Interlock SystemFeatures and Controls Control FunctionsGround Speed Levers Seat Adjustment Lever Ignition SwitchMower Cutting Height Adjustment Switch PTO Switch Hour MeterBefore first time operation General Operating SafetyOperation Checks Before StartingStarting the Engine Stopping the Rider and EngineMowing Levers Gradually Zero Turn Smooth Travel Driving PracticeForward Travel Practice Reverse Travel Practice Forward Reverse TravelPractice Turning In Place Turning In-PlaceAllows you to turn around at the end of a cutting 20’ 6m Attaching a TrailerMaintenance Chart MaintenanceVer-filling and wipe up any Engine MaintenanceAfter installation Fuel FilterSource such as a furnace, water heater, etc. and cause an Precautions may result in serious injury or deathStorage Never store the unit with fuel in an enclosed, poorlyGround Speed Lever Adjustment Adjustments and ServiceSpeed Balancing Adjustment Seat AdjustmentsTion indicated by the arrow, and remove the mower belt Cutting Height AdjustmentMower Removal and Installation RemovalWasher and hairpin clip a InstallationTion indicated, and install the belt onto the PTO pulley as With a washer and hairpin clip aBlade Brake Check PTO Clutch AdjustmentPTO Clutch Adjustment Perform the following procedure if the clutch is slippingRight side shown, left side hidden Mower Deck LevelingRemove mower deck see Mower Deck Removal Damaged, it must be replacedFig re 27. Balancing The Blade Oil LubricationGrease Front caster wheel axlesBattery Charging Battery MaintenanceTroubleshooting the Rider TroubleshootingTroubleshooting Warranty Period WarrantyNot For Not For Not For Maintenance Items SpecificationsDimensions Chassis Replacement Parts

285Z specifications

The Snapper 285Z is a robust and versatile zero-turn mower designed for efficient lawn care, making it an excellent choice for both homeowners and landscaping professionals. Renowned for its reliability and performance, the Snapper 285Z stands out in the competitive market of outdoor power equipment.

One of the main features of the Snapper 285Z is its powerful engine options. Equipped with a high-performance, commercial-grade engine, it delivers outstanding torque and power to tackle various mowing conditions. This ensures that users can easily mow through tough grass and uneven terrains without bogging down. The engine is designed for easy starting and smooth operation, contributing to the overall user experience.

The patented zero-turn technology of the Snapper 285Z allows for unparalleled maneuverability. With its dual-lever steering system, operators can easily turn in tight spaces and navigate around obstacles with confidence. This feature significantly reduces mowing time and enhances efficiency, making it ideal for residential lawns, commercial properties, and intricate landscaping designs.

The Snapper 285Z also boasts an adjustable cutting deck, with widths typically ranging from 48 to 52 inches, allowing users to choose the perfect size for their mowing needs. The deck is constructed from durable steel, ensuring longevity and resistance to wear and tear. Additionally, the cutting height can be quickly adjusted, offering versatility for different grass types and seasonal growth patterns.

Another notable characteristic of the Snapper 285Z is its user-friendly design. With a comfortable seat, ergonomic controls, and an easy-to-read instrument panel, it promotes a pleasant mowing experience. The mower is also equipped with an electric start feature, eliminating the need for pull cords and enhancing ease of use.

Safety is a top priority with the Snapper 285Z, featuring roll-over protection and safety switches that ensure the mower shuts down when the operator leaves the seat. This attention to safety not only protects the user but also adds to the mower's overall reliability.

In summary, the Snapper 285Z combines powerful performance, innovative technology, and user-focused features to offer an exceptional mowing experience. Its zero-turn capability, durable construction, and adjustable cutting options make it a top choice for anyone looking to maintain a beautiful lawn efficiently.
Top Page Image Contents