Snapper 2137 manual Safety Rules, General Warnings

Page 4

Safety Rules

Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment.

The triangle

in text signifies important cautions or warnings which must be followed.

GENERAL WARNINGS

Know the tractor controls and how to stop quickly.

READ THE TRACTOR OPERATOR’S MANUAL.

Read this manual and the tractor Operator’s Manual carefully. Be thoroughly familiar with the controls and the proper use of the equipment.

Never allow children to operate the machine. Do not allow adults to operate it without proper instruction.

Do not carry passengers.

Use only attachments or accessories designed for your machine. See your dealer for a complete list of recommended attachments or accessories.

Keep the area of operation clear of all persons, par- ticularly small children, and pets.

Never direct discharge towards bystanders.

Make sure all hardware is secure and that dozer blade is in good operating condition.

Check to be sure all safety devices and shields are in place.

Check that all adjustments are correct before using this unit.

Gasoline is highly flammable. Follow all precautions listed in your tractor’s operator’s manual.

Always wear eye protection while operating and per- forming adjustments to protect eyes from debris thrown by the dozer.

When cleaning, repairing, or inspecting the unit make sure all moving parts have stopped. Disconnect and secure the spark plug wires and remove the key to prevent accidental starting.

DANGER

OPERATING ON SLOPES

CAN BE DANGEROUS

For operation on slopes greater than 15% (8.5°), weight box, tire chains, and wheel weights are recommended. NEVER OPERATE ON SLOPES GREATER THAN 30% (16.7°).

PREPARATION

Disengage the PTO before making any adjustments.

Never attempt to make any adjustments while engine is running.

Thoroughly inspect the area where the dozer is to be operated and remove all foreign objects.

Adjust the skid shoe height to clear gravel or crushed stone surface. See the Adjustments section for pro- cedure.

OPERATING SAFETY

Always clear snow up and down the face of slopes, never across the face. Exercise extreme caution when changing direction on slopes. Do not attempt to clear steep slopes.

Exercise extreme caution when operating on, or crossing, gravel drives, walks or roads. Stay alert for hidden hazards or traffic.

After striking an object or if unit starts to vibrate abnormally, stop the engine and remove the key. Check for the cause and any damage before restart- ing. Before any inspection, make sure all moving parts have stopped.

Take all possible precautions before leaving opera- tor’s position. Lower the attachment, set the parking brake, stop the engine and remove the key.

Never operate the dozer blade near glass enclo- sures, automobiles, window wells, drop-offs, etc.

Do not put hands or feet near or under the dozer blade. Keep clear of the dozer blade at all times.

Do not overload machine capacity by attempting to plow too much material at too fast a rate.

Never operate unit at high transport speeds on slip- pery surfaces. Use care when travelling in reverse.

Never operate the dozer blade without good visibility or light. Always be sure your feet are properly placed on the footrests and keep a firm hold on the steering wheel.

Do not run the engine indoors.

Never allow anyone in front of, or behind, the unit.

2

Image 4
Contents OPERATOR’S Manual Hydraulic Angling Dozer Blade AttachmentPage Table of Contents Safety Rules General WarningsAttachment Lift Angling Control LeverTwo-Speed Control Operation Checks Before StartingEngine & Ground Speed Selection TransportingStorage Schedule For Normal Care MaintenanceLubricate Dozer Blade Troubleshooting Problem Possible Corrective Cause ActionHydraulic System Diagram Dozer Hydraulic System Without Auxiliary Hydraulic Lift KitAdjustments Skid Shoe AdjustmentLift Height Adjustment Downward Pressure AdjustmentAttach Dozer Lift Arm Initial Assembly & InstallationAssemble Dozer Blade Install Rear Hitch Mounting Brackets Install Front Hitch Mounting BracketsFront Initial Assemble & Installation Install Attachment Lift ExtensionInstall Hitch Onto Tractor Install Lift RodInstall Dozer Blade Install New Master Valve Old Master Valve Foam Screw Hair Pin Clip Actuator ArmInstall Cross-Over Tubes HolesAssemble Control Arm Install Bypass Hose & T-ConnectorViewed From Right Side Install Control Valve Assemble Control ValveTo Front Cross- Over Tube To Back Cross Install Hydraulic Cylinder On Dozer Blade Connect Hydraulic Hoses 2 Control Valve HosesAssemble Bypass Hose Dozer & Hitch Removal Normal Installation Remove Bypass Hose Hardware Identification & Torque Specifications