Snapper ZT18441KHC, ZT20501BV, ZT19441KWV important safety instructions Mower Removal Installation

Page 14

 

C

A

 

B

 

A

 

D

A

Figure 10. Mower Belt Routing

A.Arbor Pulleys

B.Back-Side Idlers

C.PTO Pulley

D.Belt Tension Release Lever

MOWER REMOVAL AND

INSTALLATION

NOTE: Perform mower installation and removal on a hard flat surface such as a concrete floor.

Removal

1.Disengage the PTO, engage the parking brake, turn off the ignition, remove the key, and wait for all mov- ing parts to stop.

2.Remove the cutting height pin and lower the attach- ment lift to its lowest position.

3.Pull the lever (A, Figure 11) towards the rear of the machine to release tension on the mower belt. Secure the lever in the guard notch (B) and remove the mower belt from the PTO pulley (C, Figure 10).

4.Pull the hair pins (C & D, Figure 12) and disconnect the deck leveling links (I & J). Pull and turn the rod locks (A, B, E & F) to release the rod ends.

5.Lift to front of the deck using a 2 x 4 as a lever, pull the handle (G) forward to release the front hangers rod ends (H), then push rearward to release the rear rod ends.

6.Pivot the front wheels out of the way and slide the mower deck out from under the unit.

Installation

1.Disengage the PTO, engage the parking brake, turn off the ignition, remove the key, and wait for all mov- ing parts to stop.

2.Remove the cutting height pin and lower the attach- ment lift to its lowest position.

3.Pivot the front wheels out of the way and slide the mower under the unit.

4.Install the leveling links and hair pins (I, J, C & D)

5.Lift the rear of the mower and install the rear lift rods (K & L) and secure with the rear rod locks (E & F).

6.Lift to front of the deck using a 2 x 4 as a lever, pull the handle (G) to align the front hanger rod ends (H) with the slots and secure with the front rod locks (A & B).

Operation

B

A

Figure 11. Release Belt Tension

A.Belt Tension Release Lever

B.Guard Notch

 

 

 

E

C

 

 

 

 

 

H

 

 

 

 

 

 

 

I

 

 

 

 

K

G

 

A

 

 

 

D

J

F

 

 

 

H

 

 

 

 

 

 

 

 

 

L

 

 

 

 

 

 

B

Figure 12. Mower Installation & Removal

A.Left Front Rod Lock

B.Right Front Rod Lock

C.Left Leveling Link Hair Pin

D.Right Leveling Link Hair Pin

E.Left Rear Rod Lock

F.Right Rear Rod Lock

G.Handle

H.Front Hanger Rod Ends

I.Left Leveling Link

J.Right Leveling Link

K.Left Rear Lift Rod

L.Right Rear Lift Rod

7.Install the belt as shown in Figure 10.

8.Release tension from the tensioning idler pulley using the belt tension lever (A, Figure 11) and make sure the belt is seated properly in all pulleys.

13

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Model Number Explanation ModelZT18441KHC ZT19441KWV ZT20501BV McDonough, GA 30253 USATable of Contents Transporting and Storage Safety Rules and InformationGeneral Operation Children Slope OperationTowed Equipment RIDE-ON Units EmissionsSafe Handling of Gasoline Service and MaintenanceService & Maintenance Decal Cut Height Decal CZT Hydro Release Decal Belt & Blade Safety DecalsSafety Decals Choke Control FunctionsGround Speed Levers Throttle Control Features & Controls General Operating Safety Checks Before StartingStopping the Rider OperationStarting the Engine MowingForward Travel Practice Zero Turn Driving PracticeSmooth Travel Reverse Travel PracticeExecuting Turns Practice Turning Around a CornerExecuting an End-Of-Row Zero Turn Trailer Weight Recommendations Clevis Pin Clip Attaching a TrailerRemoval Mower Removal InstallationInstallation Engine Maintenance Items Safety ItemsRider Maintenance Items Before Every Spring Each Hours 100 250 Fall UseGrease Regular MaintenanceLubrication OilService Interval Every 10 Hours or As Required Servicing the Mower BladesChecking / Adding Fuel Engine Maintenance Check /FILL Transmission OILCheck Tire Pressures Fuel FilterTransmission OIL Filter Change Battery MaintenanceCleaning the Battery and Cables StorageTroubleshooting, Adjustments, & Service Troubleshooting the RiderTroubleshooting, Adjustments, & Service Troubleshooting the MowerSpeed Balancing Adjustment Seat AdjustmentGround Speed Control Lever Adjustment Seat Position AdjustmentNeutral Adjustment Cutting Height AdjustmentParking Brake Adjustment Brake AdjustmentPTO Clutch Adjustment Blade Brake CheckMower Deck Leveling Orient Blades Side-to-SideHydraulic Pump Drive Belt Replacement Battery ChargingMower Belt Replacement PRY Belts Over PulleysPage Page Safety Instructions & Operator’s Manual for

ZT18441KHC, ZT19441KWV, ZT20501BV specifications

The Snapper ZT20501BV, ZT19441KWV, and ZT18441KHC are innovative zero-turn lawn mowers designed to deliver exceptional performance, efficiency, and maneuverability. Each model features a robust engine and advanced technology, making them ideal for both residential and commercial lawn care.

Starting with the Snapper ZT20501BV, this model is powered by a dependable Briggs & Stratton engine that delivers reliable performance and ease of maintenance. With a cutting deck width of 50 inches, it provides an efficient cutting experience, enabling users to cover large areas swiftly. The ZT20501BV also boasts a dual hydrostatic transmission that enhances maneuverability and speed, allowing for precise control. Additionally, the mower is equipped with a high-back seat with armrests for optimal comfort during prolonged use, ensuring that operators can tackle demanding lawn maintenance tasks without strain.

Next, the Snapper ZT19441KWV is designed with a 42-inch cutting deck, making it great for residential lawns with obstacles. This model is powered by a powerful Kohler engine, renowned for its durability and performance. The ZT19441KWV features a foot-operated deck lift, which allows users to easily adjust the cutting height on the go, enhancing convenience. Its compact design enables easy navigation around flower beds and shrubs, while its responsive zero-turn capability ensures that users can maneuver around tight corners with ease.

Finally, the Snapper ZT18441KHC offers a 42-inch cutting deck and is powered by a reliable Kawasaki engine. The ZT18441KHC stands out with its innovative air-cooled design, providing consistent performance even under heavy workloads. This model includes a user-friendly dashboard control panel that gives operators quick access to operational information, enhancing the mowing experience. The ZT18441KHC also features innovative safety measures, such as an operator presence system that ensures the engine shuts off when the operator leaves the seat, promoting safety during operation.

All three models are constructed with durable materials, ensuring longevity and reliability. Each mower is designed for ease of use, with features that enhance comfort, safety, and efficiency. With their advanced technologies and robust characteristics, the Snapper ZT20501BV, ZT19441KWV, and ZT18441KHC are optimal choices for anyone seeking a high-performance zero-turn mower to maintain their lawn effectively and effortlessly.
Top Page Image Contents