Snapper ZT19441KWV, ZT20501BV Control Functions, Ground Speed Levers Throttle Control, Choke

Page 7

Features & Controls

CONTROL FUNCTIONS

The information below briefly describes the function of individual controls. Starting, stopping, driving, and mowing require the combined use of several controls applied in specific sequences. To learn what combination and sequence of controls to use for various tasks see the OPERATION section.

 

Ground Speed Levers

 

 

 

Throttle Control

 

 

 

These levers control the ground speed of the rider. The left lever controls the left rear drive wheel and the right controls the right rear drive wheel.

Moving a lever forward increases the FORWARD speed of the associated wheel, and pulling back on a lever increases the REVERSE speed.

The further a lever is moved away from the neutral posi- tion the faster the drive wheel will turn.

See the OPERATION section for steering instructions.

The throttle controls engine speed. Move the throttle for- ward to increase engine speed and back to decrease engine speed. Always operate at FULL throttle.

Choke

Close the choke for cold starting. Open the choke once the engine starts. A warm engine may not require chok- ing. Move the lever forward to close the choke. Move the lever back to open the choke.

6

Page 6 Page 8
Image 7
Page 6 Page 8
Contents McDonough, GA 30253 USA ModelZT18441KHC ZT19441KWV ZT20501BV Model Number ExplanationTable of Contents General Operation Safety Rules and InformationTransporting and Storage Emissions Slope OperationTowed Equipment RIDE-ON Units ChildrenService & Maintenance Service and MaintenanceSafe Handling of Gasoline Safety Decals Safety DecalsDecal Cut Height Decal CZT Hydro Release Decal Belt & Blade Ground Speed Levers Throttle Control Control FunctionsChoke Features & Controls Checks Before Starting General Operating SafetyMowing OperationStarting the Engine Stopping the RiderReverse Travel Practice Zero Turn Driving PracticeSmooth Travel Forward Travel PracticeExecuting an End-Of-Row Zero Turn Practice Turning Around a CornerExecuting Turns Attaching a Trailer Trailer Weight Recommendations Clevis Pin ClipInstallation Mower Removal InstallationRemoval Before Every Spring Each Hours 100 250 Fall Use Safety ItemsRider Maintenance Items Engine Maintenance ItemsOil Regular MaintenanceLubrication GreaseServicing the Mower Blades Service Interval Every 10 Hours or As RequiredFuel Filter Engine Maintenance Check /FILL Transmission OILCheck Tire Pressures Checking / Adding FuelStorage Battery MaintenanceCleaning the Battery and Cables Transmission OIL Filter ChangeTroubleshooting the Rider Troubleshooting, Adjustments, & ServiceTroubleshooting the Mower Troubleshooting, Adjustments, & ServiceSeat Position Adjustment Seat AdjustmentGround Speed Control Lever Adjustment Speed Balancing AdjustmentBrake Adjustment Cutting Height AdjustmentParking Brake Adjustment Neutral AdjustmentBlade Brake Check PTO Clutch AdjustmentOrient Blades Side-to-Side Mower Deck LevelingBattery Charging Hydraulic Pump Drive Belt ReplacementPRY Belts Over Pulleys Mower Belt ReplacementPage Page Safety Instructions & Operator’s Manual for

ZT18441KHC, ZT19441KWV, ZT20501BV specifications

The Snapper ZT20501BV, ZT19441KWV, and ZT18441KHC are innovative zero-turn lawn mowers designed to deliver exceptional performance, efficiency, and maneuverability. Each model features a robust engine and advanced technology, making them ideal for both residential and commercial lawn care.

Starting with the Snapper ZT20501BV, this model is powered by a dependable Briggs & Stratton engine that delivers reliable performance and ease of maintenance. With a cutting deck width of 50 inches, it provides an efficient cutting experience, enabling users to cover large areas swiftly. The ZT20501BV also boasts a dual hydrostatic transmission that enhances maneuverability and speed, allowing for precise control. Additionally, the mower is equipped with a high-back seat with armrests for optimal comfort during prolonged use, ensuring that operators can tackle demanding lawn maintenance tasks without strain.

Next, the Snapper ZT19441KWV is designed with a 42-inch cutting deck, making it great for residential lawns with obstacles. This model is powered by a powerful Kohler engine, renowned for its durability and performance. The ZT19441KWV features a foot-operated deck lift, which allows users to easily adjust the cutting height on the go, enhancing convenience. Its compact design enables easy navigation around flower beds and shrubs, while its responsive zero-turn capability ensures that users can maneuver around tight corners with ease.

Finally, the Snapper ZT18441KHC offers a 42-inch cutting deck and is powered by a reliable Kawasaki engine. The ZT18441KHC stands out with its innovative air-cooled design, providing consistent performance even under heavy workloads. This model includes a user-friendly dashboard control panel that gives operators quick access to operational information, enhancing the mowing experience. The ZT18441KHC also features innovative safety measures, such as an operator presence system that ensures the engine shuts off when the operator leaves the seat, promoting safety during operation.

All three models are constructed with durable materials, ensuring longevity and reliability. Each mower is designed for ease of use, with features that enhance comfort, safety, and efficiency. With their advanced technologies and robust characteristics, the Snapper ZT20501BV, ZT19441KWV, and ZT18441KHC are optimal choices for anyone seeking a high-performance zero-turn mower to maintain their lawn effectively and effortlessly.
Top Page Image Contents