Snapper ZT19441KWV, ZT20501BV Slope Operation, Towed Equipment RIDE-ON Units, Children, Emissions

Page 4

SLOPE OPERATION

Slopes are a major factor related to loss-of-control and tip- over accidents, which can result in severe injury or death. Operation on all slopes requires extra caution. If you cannot back up the slope or if you feel uneasy on it, do not operate on it.

Control of a walk-behind or ride-on machine sliding on a slope will not be regained by the application of the brake. The main reasons for loss of control are: insufficient tire grip on the ground, speed too fast, inadequate braking, the type of machine is unsuitable for its task, lack of awareness of the ground conditions, incorrect hitching and load distri- bution.

1.Mow across slopes, not up and down.

2.Watch for holes, ruts, or bumps. Uneven terrain could overturn the unit. Tall grass can hide obstacles.

3.Choose a slow speed so that you will not have to stop or change speeds while on the slope.

4.Do not mow on wet grass. Tires may loose traction.

5.Never mow down slopes.

6.Avoid starting, stopping, or turning on a slope. If tires lose traction (i.e. machine stops forward motion on a slope), disengage the blade(s) (PTO) and drive slow off the slope.

7.Keep all movement on slopes slow and gradual. Do not make sudden changes in speed or direction, which could cause the machine to rollover.

8.Use extra care while operating machines with grass catchers or other attachments; they can affect the stability of the unit. Do not use on steeps slopes.

9.Do not try to stabilize the machine by putting your foot on the ground (ride-on units).

10.Do not mow near drop-offs, ditches, or embank- ments. The mower could suddenly turn over if a wheel is over the edge of a cliff or ditch, or if an edge caves in.

11.Do not use grass catchers on steep slopes.

12.Do not mow slopes if you cannot back up them.

13.See your authorized dealer/retailer for recommenda- tions of wheel weights or counterweights to improve stability.

14.Remove obstacles such as rocks, tree limbs, etc.

15.Use slow speed. Tires may lose traction on slopes even through the brakes are functioning properly.

16.Do not turn on slopes unless necessary, and then, turn slowly and gradually uphill, if possible. Never mow down slopes.

TOWED EQUIPMENT (RIDE-ON UNITS)

1.Tow only with a machine that has a hitch designed for towing. Do not attach towed equipment except at the hitch point.

2.Follow the manufacturer’s recommendations for weight limit for towed equipment and towing on slopes. See attaching a trailer under OPERATION.

3.Never allow children or others in or on towed equip- ment.

4.On slopes, the weight of the towed equipment may cause loss of traction and loss of control.

5.Travel slowly and allow extra distance to stop.

6.Do not shift to neutral and coast down hill.

Safety Rules and Information

WARNING

Never operate on slopes greater than 17.6 percent (10°) which is a rise of 3-1/2 feet (106 cm) vertically in 20 feet (607 cm) horizontally.

Select slow ground speed before driving onto slope. Use extra caution when operating on slopes with rear- mounted grass catchers.

Mow across the face of slopes, not up and down,use caution when changing directions and DO NOT START OR STOP ON SLOPE.

CHILDREN

Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the unit and the mowing activity. Never assume that children will remain where you last saw them.

1.Keep children out of the mowing area and under the watchful care of another responsible adult.

2.Be alert and turn unit off if children enter the area.

3.Before and during reverse operation, look behind and down for small children.

4.Never carry children, even with the blade(s) off. They may fall off and be seriously injured or interfere with safe unit operation. Children who have been given rides in the past may suddenly appear in the mowing area for another ride and be run over or backed over by the machine.

5.Never allow children to operate the unit.

6.Use extra care when approaching blind corners, shrubs, trees, or other objects that may obscure vision.

EMISSIONS

1.Engine exhaust from this product contains chemicals known, in certain quantities, to cause cancer, birth defects, or other reproductive harm.

2.Look for the relevant Emissions Durability Period and Air Index information on the engine emissions label.

IGNITION SYSTEM

1.This spark ignition system complies with Canadian ICES-002.

3

Image 4
Contents Model ZT18441KHC ZT19441KWV ZT20501BVModel Number Explanation McDonough, GA 30253 USATable of Contents General Operation Safety Rules and InformationTransporting and Storage Slope Operation Towed Equipment RIDE-ON UnitsChildren EmissionsService & Maintenance Service and MaintenanceSafe Handling of Gasoline Safety Decals Safety DecalsDecal Cut Height Decal CZT Hydro Release Decal Belt & Blade Ground Speed Levers Throttle Control Control FunctionsChoke Features & Controls General Operating Safety Checks Before StartingOperation Starting the EngineStopping the Rider MowingZero Turn Driving Practice Smooth TravelForward Travel Practice Reverse Travel PracticeExecuting an End-Of-Row Zero Turn Practice Turning Around a CornerExecuting Turns Trailer Weight Recommendations Clevis Pin Clip Attaching a TrailerInstallation Mower Removal InstallationRemoval Safety Items Rider Maintenance ItemsEngine Maintenance Items Before Every Spring Each Hours 100 250 Fall UseRegular Maintenance LubricationGrease OilService Interval Every 10 Hours or As Required Servicing the Mower BladesEngine Maintenance Check /FILL Transmission OIL Check Tire PressuresChecking / Adding Fuel Fuel FilterBattery Maintenance Cleaning the Battery and CablesTransmission OIL Filter Change StorageTroubleshooting, Adjustments, & Service Troubleshooting the RiderTroubleshooting, Adjustments, & Service Troubleshooting the MowerSeat Adjustment Ground Speed Control Lever AdjustmentSpeed Balancing Adjustment Seat Position AdjustmentCutting Height Adjustment Parking Brake AdjustmentNeutral Adjustment Brake AdjustmentPTO Clutch Adjustment Blade Brake CheckMower Deck Leveling Orient Blades Side-to-SideHydraulic Pump Drive Belt Replacement Battery ChargingMower Belt Replacement PRY Belts Over PulleysPage Page Safety Instructions & Operator’s Manual for

ZT18441KHC, ZT19441KWV, ZT20501BV specifications

The Snapper ZT20501BV, ZT19441KWV, and ZT18441KHC are innovative zero-turn lawn mowers designed to deliver exceptional performance, efficiency, and maneuverability. Each model features a robust engine and advanced technology, making them ideal for both residential and commercial lawn care.

Starting with the Snapper ZT20501BV, this model is powered by a dependable Briggs & Stratton engine that delivers reliable performance and ease of maintenance. With a cutting deck width of 50 inches, it provides an efficient cutting experience, enabling users to cover large areas swiftly. The ZT20501BV also boasts a dual hydrostatic transmission that enhances maneuverability and speed, allowing for precise control. Additionally, the mower is equipped with a high-back seat with armrests for optimal comfort during prolonged use, ensuring that operators can tackle demanding lawn maintenance tasks without strain.

Next, the Snapper ZT19441KWV is designed with a 42-inch cutting deck, making it great for residential lawns with obstacles. This model is powered by a powerful Kohler engine, renowned for its durability and performance. The ZT19441KWV features a foot-operated deck lift, which allows users to easily adjust the cutting height on the go, enhancing convenience. Its compact design enables easy navigation around flower beds and shrubs, while its responsive zero-turn capability ensures that users can maneuver around tight corners with ease.

Finally, the Snapper ZT18441KHC offers a 42-inch cutting deck and is powered by a reliable Kawasaki engine. The ZT18441KHC stands out with its innovative air-cooled design, providing consistent performance even under heavy workloads. This model includes a user-friendly dashboard control panel that gives operators quick access to operational information, enhancing the mowing experience. The ZT18441KHC also features innovative safety measures, such as an operator presence system that ensures the engine shuts off when the operator leaves the seat, promoting safety during operation.

All three models are constructed with durable materials, ensuring longevity and reliability. Each mower is designed for ease of use, with features that enhance comfort, safety, and efficiency. With their advanced technologies and robust characteristics, the Snapper ZT20501BV, ZT19441KWV, and ZT18441KHC are optimal choices for anyone seeking a high-performance zero-turn mower to maintain their lawn effectively and effortlessly.