Snapper ZT20501BV, ZT19441KWV, ZT18441KHC Mower Belt Replacement, PRY Belts Over Pulleys

Page 27

Troubleshooting, Adjustments, & Service

MOWER BELT REPLACEMENT

To avoid damaging belts, DO NOT

PRY BELTS OVER PULLEYS.

1.Park the rider on a smooth, level surface such as a concrete floor. Disengage the PTO, engage the park- ing brake, turn off the engine, and remove the ignition key.

2.Raise the mower deck to transport position. Pull the lever (A, Figure 33) towards the rear of the machine to release tension on the mower belt. Secure the lever in the guard notch (B).

3.Remove the old drive belt and install the new one as shown in Figure 32. Note that the back of the drive belt must ride against the back-side idler pulleys (B). Use the belt tension lever (A, Figure 33) to release tension on the idler pulley for installation.

A	C
	C
B	A
	A
A
	D

Figure 32. Mower Belt Routing

A.Arbor Pulleys

B.Back-Side Idler Pulleys

C.PTO Pulley

D.Belt Tension Release Lever

Figure 33. Release Belt Tension

A.Belt Tension Release Lever

B.Guard Notch

Image 27

Contents McDonough, GA 30253 USA ModelZT18441KHC ZT19441KWV ZT20501BV Model Number ExplanationTable of Contents Safety Rules and Information General OperationTransporting and Storage Emissions Slope OperationTowed Equipment RIDE-ON Units ChildrenService and Maintenance Service & MaintenanceSafe Handling of Gasoline Safety Decals Safety DecalsDecal Cut Height Decal CZT Hydro Release Decal Belt & Blade Control Functions Ground Speed Levers Throttle ControlChoke Features & Controls Checks Before Starting General Operating SafetyMowing OperationStarting the Engine Stopping the RiderReverse Travel Practice Zero Turn Driving PracticeSmooth Travel Forward Travel PracticePractice Turning Around a Corner Executing an End-Of-Row Zero TurnExecuting Turns Attaching a Trailer Trailer Weight Recommendations Clevis Pin ClipMower Removal Installation InstallationRemoval Before Every Spring Each Hours 100 250 Fall Use Safety ItemsRider Maintenance Items Engine Maintenance ItemsOil Regular MaintenanceLubrication GreaseServicing the Mower Blades Service Interval Every 10 Hours or As RequiredFuel Filter Engine Maintenance Check /FILL Transmission OILCheck Tire Pressures Checking / Adding FuelStorage Battery MaintenanceCleaning the Battery and Cables Transmission OIL Filter ChangeTroubleshooting the Rider Troubleshooting, Adjustments, & ServiceTroubleshooting the Mower Troubleshooting, Adjustments, & ServiceSeat Position Adjustment Seat AdjustmentGround Speed Control Lever Adjustment Speed Balancing AdjustmentBrake Adjustment Cutting Height AdjustmentParking Brake Adjustment Neutral AdjustmentBlade Brake Check PTO Clutch AdjustmentOrient Blades Side-to-Side Mower Deck LevelingBattery Charging Hydraulic Pump Drive Belt ReplacementPRY Belts Over Pulleys Mower Belt ReplacementPage Page Safety Instructions & Operator’s Manual for

ZT18441KHC, ZT19441KWV, ZT20501BV specifications

The Snapper ZT20501BV, ZT19441KWV, and ZT18441KHC are innovative zero-turn lawn mowers designed to deliver exceptional performance, efficiency, and maneuverability. Each model features a robust engine and advanced technology, making them ideal for both residential and commercial lawn care.

Starting with the Snapper ZT20501BV, this model is powered by a dependable Briggs & Stratton engine that delivers reliable performance and ease of maintenance. With a cutting deck width of 50 inches, it provides an efficient cutting experience, enabling users to cover large areas swiftly. The ZT20501BV also boasts a dual hydrostatic transmission that enhances maneuverability and speed, allowing for precise control. Additionally, the mower is equipped with a high-back seat with armrests for optimal comfort during prolonged use, ensuring that operators can tackle demanding lawn maintenance tasks without strain.

Next, the Snapper ZT19441KWV is designed with a 42-inch cutting deck, making it great for residential lawns with obstacles. This model is powered by a powerful Kohler engine, renowned for its durability and performance. The ZT19441KWV features a foot-operated deck lift, which allows users to easily adjust the cutting height on the go, enhancing convenience. Its compact design enables easy navigation around flower beds and shrubs, while its responsive zero-turn capability ensures that users can maneuver around tight corners with ease.

Finally, the Snapper ZT18441KHC offers a 42-inch cutting deck and is powered by a reliable Kawasaki engine. The ZT18441KHC stands out with its innovative air-cooled design, providing consistent performance even under heavy workloads. This model includes a user-friendly dashboard control panel that gives operators quick access to operational information, enhancing the mowing experience. The ZT18441KHC also features innovative safety measures, such as an operator presence system that ensures the engine shuts off when the operator leaves the seat, promoting safety during operation.

All three models are constructed with durable materials, ensuring longevity and reliability. Each mower is designed for ease of use, with features that enhance comfort, safety, and efficiency. With their advanced technologies and robust characteristics, the Snapper ZT20501BV, ZT19441KWV, and ZT18441KHC are optimal choices for anyone seeking a high-performance zero-turn mower to maintain their lawn effectively and effortlessly.