Snapper NZM19482KWV, NZM21522KWV, NZM25612KWV, NZM27612KH Traction Belt Tension

Page 22

Section 5 - ADJUSTMENTS & REPAIR

WARNING

DO NOT attempt any maintenance, adjustments or service with engine running. STOP engine. STOP blades. Set brake. Remove key. Remove spark plug wires and secure away from spark plugs. Engine and components are HOT. Avoid serious burns, allow sufficient time for all parts to cool.

5.3TRACTION BELT TENSION

The traction drive belt tension does not require

adjustment. If the belts are slipping, they will have to be replaced.

LOCK NUT

J-BOLT

FIGURE 5.9

5.4TRACTION BELT REPLACEMENT

1.Remove clutch to deck belt. See Figure 5.10.

2.Turn lock nut out to the end of J-Bolt, reducing spring tension. Unhook traction idler spring from bolt in frame. See Figure 5.9

3.Remove anti-rotation bracket. See Figure 5.10

4.Disconnect the electric clutch from main wire harness.

5.Remove traction belts from around engine pulley and hydro pumps.

6.Install new belts and route around engine pulley and hydro pump pulleys.

7.Reconnect electric clutch to main wire harness.

8.Reinstall anti-rotation bracket and tighten nuts securely.

9.Reattach traction idler spring. Run lock nut all the way to the end of the threads on the J-Bolt. See Figure 5.10.

10.Reinstall electric clutch to deck belt onto electric clutch.

UNHOOK TRACTION

 

REMOVE ANTI-

DRIVE IDLER SPRING

 

ROTATION BRACKET

 

 

 

REMOVE CLUTCH

TO DECK BELT

FIGURE 5.10

5.5BLADE BRAKE/ELECTRIC CLUTCH ADJUSTMENT The blade switch engages the electric clutch when pulled out to the “ON” position. When the blade switch is in the “ON” position the cutting blade(s) are engaged. The blade switch disengages the electric clutch when the blade switch is pushed in to the “OFF” position. When the blade switch is in the “OFF” position the cutting blade(s) are disengaged. The electric clutch is adjustable. The blades should stop rotation in 7 seconds or less. If the electric clutch fails to stop the blades rotation in

7seconds, adjustment is necessary.

1.Insert a feeler gauge into the three slots on the electric clutch.

2.Check gap through all three slots in the side of the clutch. The gap should be set at .015.

3.If gap is incorrect rotate nuts in or out to achieve the correct gap. See Figure 5.11.

NOTE: Electric Clutch is shown removed from the machine. Removal is not necessary for adjustment.

INSERT FEELER GAUGE.

GAP SHOULD BE .015

ROTATE NUTS

IN OR OUT

TO ACHIEVE

CORRECT GAP

FIGURE 5.11

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents MID Mount Z-RIDER Zero Turning Hydro Drive Series Important Safety Instructions From Previous SnapperMaintenance Table of Contents Your Snapper dealer if you have questions Are provided for reference only and mayDiffer from your specific model. Contact IntroductionSafety Messages and Symbols RUN Operating Instructions PRE-START Check ListStarting & Stopping ENGINE, BLADES, Parking Brake Starting EngineStopping Mower Blades Stopping EngineStarting Mower Blades Parking BrakeCutting Height Adjustment OPERATION- Motion Controls Driving MachineEngine should Start if Stopping MachineEngine Must not Start if Engine Must Begin to Stop ifService After First 5 Hours Check Mower BladeAfter Every 25 Operating Hours 4.3.1. Engine Before Operating Machine Riding Mower LubricationAnnually END of Each Season Deck Removal See Figure Adjustments & Repair Neutral Position AdjustmentsMower Deck Adjustment Levelness Neutral Position Adjustments From PreviousMower Deck & Component Adjustments Side to Side and Front to RearParking Brake Adjustment Highest cutting position and recheck side to sideTraction Belt Replacement Traction Belt TensionBelt Replacement Tracking AdjustmentMower Drive Belt Replacement Belt RemovalBlade Sharpening Battery Installation Battery Battery RemovalBattery Charging NEW Battery Preparation 1.Remove battery from carton Battery TestingState of Charge Digital Voltmeter Bearing Replacement Insert spindle shaft up through the bottomHydraulic SYSTEM, Purging Trouble Shooting on Next Problem Probable CauseCorrective Action Machine Will Not Move 100 Service Performed EachMAINTENANCE/REPLACEMENT Parts Number USE HRS SeasonYear Limited Warranty Disclaimer of WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Snapper Product Registration Form Page Page MID Mount Z-RIDER Zero Turning Hydro Drive Series

NZM25612KWV, NZM19482KWV, NZM21522KWV, NZM27612KH, NZM19482KWV, NZM21522KWV, NZM25612KWV, NZM27612KH, NZM21522KWV, NZM19482KWV, NZM25612KWV, NZM27612KH, NZM27612KH, NZM19482KWV, NZM21522KWV, NZM25612KWV specifications

The Snapper series of zero-turn mowers, including models NZM25612KWV, NZM19482KWV, NZM21522KWV, and NZM27612KH, are designed to deliver optimal performance, exceptional comfort, and cutting-edge technology for residential and commercial lawn care. Each model presents unique characteristics tailored to different mowing needs, making them suitable for various landscaping tasks.

The NZM25612KWV stands out with its powerful 25 horsepower engine, coupled with a robust 52-inch cutting deck. The cutting height adjustment feature allows for precision mowing, enabling users to achieve their desired grass length effortlessly. This model is particularly appreciated for its impressive maneuverability, making it ideal for navigating around obstacles in large yards or commercial properties.

On the other hand, the NZM19482KWV offers a slightly smaller footprint with a 48-inch cutting deck powered by a 19 horsepower engine. This model is perfect for homeowners with smaller lawns while still providing the efficiency and speed of a zero-turn mower. The compact design allows for easy storage, while the comfortable seating and intuitive controls contribute to a seamless mowing experience.

The NZM21522KWV combines the best of both worlds, featuring a 22 horsepower engine and a 54-inch cutting deck. This model is designed for those who require a balance between power and cutting width, making it versatile for both residential and commercial use. Additionally, its advanced vibration-dampening technology ensures comfort, even during extended mowing sessions.

Then there's the NZM27612KH, which boasts an impressive 27 horsepower engine paired with a 60-inch cutting deck. This powerhouse model is specifically engineered for large properties and professional landscapers who demand reliability and efficiency. With an expanded fuel tank and heavy-duty construction, it tackles extensive mowing tasks with ease, providing a crisp and clean cut every time.

In terms of technology, all the Snapper models incorporate user-friendly features such as electric deck lift options, easy-to-read LED displays for monitoring speed and battery life, and enhanced safety mechanisms. These models are also built with high-quality materials, ensuring durability and longevity in performance. Special attention is given to ease of maintenance, with accessible components for quick servicing and repairs.

Overall, Snapper mowers like the NZM25612KWV, NZM19482KWV, NZM21522KWV, and NZM27612KH not only elevate the gardening experience through their innovative design and advanced engineering but also enhance productivity for both at-home lawn care enthusiasts and professional landscapers alike.
Top Page Image Contents