Snapper NZM21522KWV, NZM19482KWV, NZM25612KWV, NZM27612KH Problem Probable Cause

Page 29

TROUBLESHOOTING

PROBLEM

 

PROBABLE CAUSE

Starter Will Not Crank

1. Battery dead.

Engine

2. Blown fuse.

 

3.

Electrical connections loose or corroded.

 

4.

Defective ignition switch.

Engine Will Not Start

1. Blade engagement switch in the “ON” position.

 

2.

Park brake not set or Operator not seated.

 

3.

Motion Controls not in Neutral Lock Position.

 

4.

Fuel tank empty.

 

5.

Engine needs choking.

 

6.

Spark plug wire disconnected.

 

7.

Battery weak or dead.

 

8.

Faulty parking brake, blade or ignition switch.

Engine Stalls After

1. Operator not in seat.

Running

2. Choke control in the “CHOKE” position.

3.Fuel tank empty.

4.Engine air pre-cleaner and or air cleaner dirty.

5.Spark plug defective or gap set improperly.

6.Fuel filter stopped up.

7.Water, debris or stale fuel in fuel system.

Engine Loses Power 1. Excessive load on engine.

 

2.

Engine air pre-cleaner or air cleaner dirty.

 

3.

Engine oil level low.

 

4. Engine cooling fins & air intake screen excessively dirty.

 

5.

Spark plug faulty.

 

6.

Water, debris or stale fuel in fuel system.

Engine Backfires When

1. Throttle control set too “FAST”.

Turned To “STOP”

 

 

Excessive Vibration

1. Damaged or bent mower blades.

 

2.

Loose blade components.

 

3.

Worn or damaged components.

 

4.

Loose or missing air lift (if equipped).

CORRECTIVE ACTION

1.Service battery.

2.Replace fuse.

3.Clean and check connections for good contact.

4.Contact authorized SNAPPER dealer.

1.Move blade engagement switch to “OFF”.

2.Set park brake and Operator in Operator Seat.

3.Place Motion Controls in Neutral Lock Position.

4.Fill fuel tank with fresh fuel.

5.Move choke control to “CHOKE” position.

6.Place spark plug wire onto spark plug.

7.Service battery.

8.Contact authorized SNAPPER dealer.

1.Sit in operator’s seat.

2.Move choke control to “OFF” position.

3.Fill with fuel to proper level.

4.Clean free of all debris.

5.Service spark plug.

6.Replace fuel filter.

7.Drain and clean fuel system.

1.Lessen load.

2.Clean or replace filters.

3.Fill with engine oil to proper level.

4.Clean cooling fins, air intake screen of all debris.

5.Service spark plug.

6.Drain and clean fuel system.

1.Set throttle control to “SLOW” and allow engine to idle. Then, turn key to “OFF”.

1.Service mower blade(s).

2.Service and tighten loose parts.

3.Inspect all belts and pulleys.

4.Replace air lifts. Tighten to proper torque.

(Trouble Shooting Continued on Next Page)

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents MID Mount Z-RIDER Zero Turning Hydro Drive Series Important Safety Instructions Snapper From PreviousMaintenance Table of Contents Differ from your specific model. Contact Are provided for reference only and mayYour Snapper dealer if you have questions IntroductionSafety Messages and Symbols RUN PRE-START Check List Operating InstructionsStarting Engine Starting & Stopping ENGINE, BLADES, Parking BrakeStarting Mower Blades Stopping EngineStopping Mower Blades Parking BrakeOPERATION- Motion Controls Driving Machine Cutting Height AdjustmentEngine Must not Start if Stopping MachineEngine should Start if Engine Must Begin to Stop ifCheck Mower Blade Service After First 5 HoursAfter Every 25 Operating Hours 4.3.1. Engine Annually END of Each Season Riding Mower LubricationBefore Operating Machine Deck Removal See Figure Neutral Position Adjustments Adjustments & RepairMower Deck & Component Adjustments Neutral Position Adjustments From PreviousMower Deck Adjustment Levelness Side to Side and Front to RearHighest cutting position and recheck side to side Parking Brake AdjustmentTraction Belt Tension Traction Belt ReplacementMower Drive Belt Replacement Tracking AdjustmentBelt Replacement Belt RemovalBlade Sharpening Battery Charging Battery Battery RemovalBattery Installation State of Charge Digital Voltmeter Battery TestingNEW Battery Preparation 1.Remove battery from carton Insert spindle shaft up through the bottom Bearing ReplacementHydraulic SYSTEM, Purging Corrective Action Problem Probable CauseTrouble Shooting on Next Machine Will Not Move MAINTENANCE/REPLACEMENT Parts Service Performed Each100 Number USE HRS SeasonDisclaimer of Warranty Year Limited WarrantyPrimary Maintenance Primary Maintenance Primary Maintenance Primary Maintenance Snapper Product Registration Form Page Page MID Mount Z-RIDER Zero Turning Hydro Drive Series

NZM25612KWV, NZM19482KWV, NZM21522KWV, NZM27612KH, NZM19482KWV, NZM21522KWV, NZM25612KWV, NZM27612KH, NZM21522KWV, NZM19482KWV, NZM25612KWV, NZM27612KH, NZM27612KH, NZM19482KWV, NZM21522KWV, NZM25612KWV specifications

The Snapper series of zero-turn mowers, including models NZM25612KWV, NZM19482KWV, NZM21522KWV, and NZM27612KH, are designed to deliver optimal performance, exceptional comfort, and cutting-edge technology for residential and commercial lawn care. Each model presents unique characteristics tailored to different mowing needs, making them suitable for various landscaping tasks.

The NZM25612KWV stands out with its powerful 25 horsepower engine, coupled with a robust 52-inch cutting deck. The cutting height adjustment feature allows for precision mowing, enabling users to achieve their desired grass length effortlessly. This model is particularly appreciated for its impressive maneuverability, making it ideal for navigating around obstacles in large yards or commercial properties.

On the other hand, the NZM19482KWV offers a slightly smaller footprint with a 48-inch cutting deck powered by a 19 horsepower engine. This model is perfect for homeowners with smaller lawns while still providing the efficiency and speed of a zero-turn mower. The compact design allows for easy storage, while the comfortable seating and intuitive controls contribute to a seamless mowing experience.

The NZM21522KWV combines the best of both worlds, featuring a 22 horsepower engine and a 54-inch cutting deck. This model is designed for those who require a balance between power and cutting width, making it versatile for both residential and commercial use. Additionally, its advanced vibration-dampening technology ensures comfort, even during extended mowing sessions.

Then there's the NZM27612KH, which boasts an impressive 27 horsepower engine paired with a 60-inch cutting deck. This powerhouse model is specifically engineered for large properties and professional landscapers who demand reliability and efficiency. With an expanded fuel tank and heavy-duty construction, it tackles extensive mowing tasks with ease, providing a crisp and clean cut every time.

In terms of technology, all the Snapper models incorporate user-friendly features such as electric deck lift options, easy-to-read LED displays for monitoring speed and battery life, and enhanced safety mechanisms. These models are also built with high-quality materials, ensuring durability and longevity in performance. Special attention is given to ease of maintenance, with accessible components for quick servicing and repairs.

Overall, Snapper mowers like the NZM25612KWV, NZM19482KWV, NZM21522KWV, and NZM27612KH not only elevate the gardening experience through their innovative design and advanced engineering but also enhance productivity for both at-home lawn care enthusiasts and professional landscapers alike.
Top Page Image Contents