Snapper 020230 How to Use Spray Tips, Low Pressure, High Pressure Cleaning and Applying Chemical

Page 11

2650 PSI Pressure Washer

NOTE: A small amount of water will squirt out when pressure is released.

4.Engage trigger lock on spray gun when not in use.

How to Use Spray Tips

The quick–connect on the nozzle extension allows you to switch between four different spray tips.The spray tips vary the spray pattern as shown (Figure 12).

4.Pull back on collar, insert new spray tip and release collar.Tug on spray tip to make sure it is securely in place.

5.For most effective cleaning, keep spray tip from 8 to

24 inches away from cleaning surface. If you get spray tip too close, you may damage cleaning surface.

6.DO NOT get closer than 6 inches when cleaning tires.

CAUTION

A pressure washer produces a high pressure spray which increases risk of injury and damage to unit.

NEVER exchange spray tips without locking the safety latch on the trigger.

Follow these instructions to change spray tips:

1.Engage safety latch on spray gun.

2.Pull back collar on quick–connect and pull current spray tip off. Store spray tips in holder provided on the nozzle extension.

3.Select desired spray tip:

For gentle rinse, select white 40° spray tip.

To scour surface, select yellow 15° or red 0° spray tip.

To apply chemical, select black spray tip.

Figure 12 — Spray Tip Spray Patterns

Low Pressure

Black

Use to apply

chemical

High Pressure

Cleaning and Applying Chemical

IMPORTANT: Use soaps designed specifically for

pressure washers. Household detergents could damage the pump.

CAUTION

You must attach all hoses before you start the engine.

Starting the engine without all the hoses connected and without the water turned ON will damage the pump.

Damage to equipment resulting from failure to follow this instruction will void warranty.

To apply detergent follow these steps:

1.Review spray tip use.

2.Prepare detergent solution as required by manufacturer.

3.Place small filter end of detergent siphoning tube into detergent container.

CAUTION

Keep the chemical injection tube from coming in contact with the hot muffler.

When inserting filter into a detergent solution bottle, route tube to keep it from inadvertently contacting hot muffler.

4.Make sure black spray tip is installed.

NOTE: Detergent cannot be applied with the high pressure spray tips (White,Yellow, or Red).

5.Make sure garden hose is connected to water inlet. Check that high pressure hose is connected to spray gun and pump and start engine.

6.Apply detergent to a dry surface, starting at lower portion of area to be washed and work upward, using long, even, overlapping strokes.

40° White

 

15° Yellow

 

0° Red

11

Image 11
Contents PSI Pressure Washer Equipment Description Table of ContentsSafety Rules Operate pressure washer only outdoors When Adding FuelUnintentional sparking can result in fire or electric shock Reflective exhaust heat may damage fuel tank causing firePump equipped with Automatic Cool Down System Safety Goggles not shown Always use the enclosedKnow Your Pressure Washer Remove Pressure Washer From Carton AssemblyCarton Contents Preparing Pressure Washer for USEConnect Hose and Water Supply to Pump Add Engine Oil and FuelConnect Garden Hose to Water Inlet Checklist Before Starting EnginePressure Washer Clearance HOW to USE Your Pressure WasherHow to Start Pressure Washer Pressure Washer LocationTrigger Lock How to Stop Your Pressure WasherLow Pressure How to Use Spray TipsHigh Pressure Cleaning and Applying Chemical Thermal Relief Cleaning Detergent Siphoning TubePressure Washer Rinsing Automatic Cool Down SystemPressure Washer Maintenance SpecificationsGeneral Maintenance Recommendations Ring Maintenance Nozzle MaintenanceChange pump oil as follows Engine MaintenancePump Maintenance Changing Pump OilProtecting the Pump Always wear eye protection when using PumpSaverPreparing the Unit for Storage Storing the EnginePSI Pressure Washer Problem Cause Correction TroubleshootingPortable Generator Years 2nd year parts only Snapper Owner Warranty Policy Effective August 1About your equipment warranty Equipment Consumer Use Commercial UseAdvertencia Tabla DE ContenidosDescripción DEL Equipo Reglas DE SeguridadCuando Añada Combustible Precaución Perilla del Cebador Usada para arranque de motores fríos Conozca SU Maquina Lavadora DE PresionContenido de la Caja MontajePreparando EL Lavador a Presión Para SU USO Remueva el Lavador a Presión del EmpaqueGancho del Pistola Manguera Agregar Aceite al Motor y GasolinaConecte la Manguera y el Suministro de Agua a la Bomba Lista DE Revision Previa AL Arranque DEL Motor Espacio Libre Alrededor del Lavadora a Presión Cómo Usar SU Lavadora a PresiónUbicación del Lavadora a Presión Cómo Darle Arranque a su Lavadora a PresiónEl Pasador de la Seguridad Cómo Detener su Máquina Lavadora a PresiónLimpieza y Aplicación del Químico Cómo Usar las Puntas de RocíoLa Presión Baja La Presión AltaPara Enjuage Enjuage de la Máquina Lavadora a PresiónLimpiando el Tubo Sistema de Enfriamiento Automático Alivio TérmicoMantenimiento DE LA Maquina Lavadora a Presion EspecificacionesRecomendaciones Generales Mantenimiento de los Anillos O Mantenimiento de la BoquillaCambie el aceite como se indica a continuación Mantenimiento DEL MotorMantenimiento de la Bomba Cambio del aceite de la bombaProteger la Bomba Preparando LA Unidad Para SU AlmacenamientoAlmacenando EL Motor Reparacion DE Averias Año Efectiva desde el 1 ro de AgostoEquipo Para Uso Del Consumidor Para Uso Comercial Generador Portátil

020230 specifications

Snapper 020230 is an advanced tool designed specifically for efficiency and precision in various applications, particularly within the landscaping and gardening sector. Known for its robust performance and innovative features, the Snapper 020230 has quickly gained popularity among both professionals and DIY enthusiasts.

One of the standout features of the Snapper 020230 is its powerful engine. Equipped with a reliable Briggs & Stratton engine, this tool delivers consistent power, making it capable of handling tough mowing tasks with ease. The engine is designed for optimal performance, offering high torque and fuel efficiency, allowing users to achieve longer operating times without frequent refueling.

The design of the Snapper 020230 emphasizes user comfort and control. It boasts an ergonomic handle that provides a comfortable grip, reducing fatigue during prolonged use. The adjustable height settings allow users to customize the cutting height according to their preferences, ensuring a clean and even cut every time.

Another significant characteristic is the cutting deck, which measures 21 inches in width. This size is perfectly balanced for maneuverability and efficiency, allowing users to navigate tight spaces while still covering substantial ground. The deck design also incorporates a mulching feature, enabling grass clippings to be finely chopped and returned to the lawn, promoting healthier growth.

In addition to its physical features, the Snapper 020230 integrates modern technologies that enhance its functionality. The easy-start system is designed to minimize the effort needed to start the engine, ensuring that users can get to work quickly. Moreover, the dual-bagging system enables efficient collection of grass clippings, reducing clean-up time.

Durability is another key characteristic of the Snapper 020230. Constructed with high-quality materials, this tool is built to withstand the rigors of regular use in challenging outdoor conditions. Its rust-resistant components ensure longevity while maintaining peak performance through various weather scenarios.

Overall, the Snapper 020230 stands out for its powerful engine, user-friendly design, and advanced technologies. Whether for commercial landscaping projects or personal gardening, this tool is engineered to deliver exceptional results, making it a worthy investment for anyone looking to enhance their lawn care experience. With its combination of efficiency, durability, and innovative features, the Snapper 020230 is a reliable choice for any outdoor enthusiast.