Snapper 020230 user manual Operate pressure washer only outdoors, When Adding Fuel

Page 3

2650 PSI Pressure Washer

WARNING

Running engine gives off carbon monoxide, an odorless, colorless, poison gas.

Breathing carbon monoxide can cause nausea, fainting or death.

Some chemicals or detergents may be harmful if inhaled or ingested, causing severe nausea, fainting or poisoning.

•Operate pressure washer ONLY outdoors.

•Keep exhaust gas from entering a confined area through windows, doors, ventilation intakes or other openings.

•DO NOT operate pressure washer inside any building or enclosure, even if doors or windows are open.

•Use a respirator or mask whenever there is a chance that vapors may be inhaled.

•Read all instructions with mask so you are certain the mask will provide the necessary protection against inhaling harmful vapors.

WARNING

Use of pressure washer can create puddles and slippery surfaces.

High pressure spray could cause you to fall if you are too close to the cleaning surface.

•Keep spray nozzle between 8 to 24 inches away from cleaning surface.

•Operate this unit on a stable surface.

•The cleaning area should have adequate slopes and drainage to reduce the possibility of a fall due to slippery surfaces.

•Be extremely careful if you must use the pressure washer from a ladder, scaffolding or any other relatively unstable location.

•Firmly grasp spray gun with both hands when using high pressure spray to avoid injury if gun kicks back.

WARNING

Rapid retraction of starter cord (kickback) will pull hand and arm toward engine faster than you can let go.

Broken bones, fractures, bruises or sprains could result.

•When starting engine, pull cord slowly until resistance is felt and then pull rapidly to avoid kickback.

•If engine starts and fails to continue to run or if increased resistance is felt during starting pull attempts, squeeze trigger on spray gun.

WARNING

Fuel and its vapors are extremely flammable and explosive.

Fire or explosion can cause severe burns or death.

WHEN ADDING FUEL

•Turn pressure washer OFF and let it cool at least 2 minutes before removing gas cap.

•Fill fuel tank outdoors.

•DO NOT overfill tank. Allow space for fuel expansion.

•Keep fuel away from sparks, open flames, pilot lights, heat, and other ignition sources.

•DO NOT light a cigarette or smoke.

WHEN OPERATING EQUIPMENT

•DO NOT tip engine or equipment at angle which causes fuel to spill.

•DO NOT spray flammable liquids.

WHEN TRANSPORTING OR REPAIRING EQUIPMENT

•Transport/repair with fuel tank EMPTY or with fuel shutoff valve OFF.

WHEN STORING FUEL OR EQUIPMENT WITH FUEL IN TANK

•Store away from furnaces, stoves, water heaters, clothes dryers or other appliances that have pilot light or other ignition source because they can ignite fuel vapors.

WARNING

The high pressure stream of water that this equipment produces can pierce skin and its underlying tissues, leading to serious injury and possible amputation.

Spray gun retains high pressure when pressure washer is shut down and water is disconnected, which can cause injury.

•NEVER aim spray gun at people, animals or plants.

•DO NOT allow CHILDREN to operate pressure washer.

•NEVER repair high pressure hose. Replace it.

•NEVER repair leaking connections with sealant of any kind. Replace o-ring or seal.

•Keep high pressure hose connected to pump and spray gun while system is pressurized.

•Squeeze trigger on spray gun to relieve trapped pressure, every time you stop engine. Engage trigger lock on spray gun.

WARNING

Spray contact with electrical wiring can result in electrocution.

•Keep water spray away from electric wiring or fatal electric shock may result.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents PSI Pressure Washer Table of Contents Safety RulesEquipment Description Operate pressure washer only outdoors When Adding FuelUnintentional sparking can result in fire or electric shock Reflective exhaust heat may damage fuel tank causing fireSafety Goggles not shown Always use the enclosed Know Your Pressure WasherPump equipped with Automatic Cool Down System Remove Pressure Washer From Carton AssemblyCarton Contents Preparing Pressure Washer for USEConnect Hose and Water Supply to Pump Add Engine Oil and FuelConnect Garden Hose to Water Inlet Checklist Before Starting EnginePressure Washer Clearance HOW to USE Your Pressure WasherHow to Start Pressure Washer Pressure Washer LocationTrigger Lock How to Stop Your Pressure WasherHow to Use Spray Tips High Pressure Cleaning and Applying ChemicalLow Pressure Thermal Relief Cleaning Detergent Siphoning TubePressure Washer Rinsing Automatic Cool Down SystemSpecifications General Maintenance RecommendationsPressure Washer Maintenance Ring Maintenance Nozzle MaintenanceChange pump oil as follows Engine MaintenancePump Maintenance Changing Pump OilProtecting the Pump Always wear eye protection when using PumpSaverPreparing the Unit for Storage Storing the EnginePSI Pressure Washer Problem Cause Correction TroubleshootingPortable Generator Years 2nd year parts only Snapper Owner Warranty Policy Effective August 1About your equipment warranty Equipment Consumer Use Commercial UseAdvertencia Tabla DE ContenidosDescripción DEL Equipo Reglas DE SeguridadCuando Añada Combustible Precaución Perilla del Cebador Usada para arranque de motores fríos Conozca SU Maquina Lavadora DE PresionContenido de la Caja MontajePreparando EL Lavador a Presión Para SU USO Remueva el Lavador a Presión del EmpaqueAgregar Aceite al Motor y Gasolina Conecte la Manguera y el Suministro de Agua a la BombaGancho del Pistola Manguera Lista DE Revision Previa AL Arranque DEL Motor Espacio Libre Alrededor del Lavadora a Presión Cómo Usar SU Lavadora a PresiónUbicación del Lavadora a Presión Cómo Darle Arranque a su Lavadora a PresiónEl Pasador de la Seguridad Cómo Detener su Máquina Lavadora a PresiónLimpieza y Aplicación del Químico Cómo Usar las Puntas de RocíoLa Presión Baja La Presión AltaPara Enjuage Enjuage de la Máquina Lavadora a PresiónLimpiando el Tubo Sistema de Enfriamiento Automático Alivio TérmicoEspecificaciones Recomendaciones GeneralesMantenimiento DE LA Maquina Lavadora a Presion Mantenimiento de los Anillos O Mantenimiento de la BoquillaCambie el aceite como se indica a continuación Mantenimiento DEL MotorMantenimiento de la Bomba Cambio del aceite de la bombaPreparando LA Unidad Para SU Almacenamiento Almacenando EL MotorProteger la Bomba Reparacion DE Averias Año Efectiva desde el 1 ro de AgostoEquipo Para Uso Del Consumidor Para Uso Comercial Generador Portátil

020230 specifications

Snapper 020230 is an advanced tool designed specifically for efficiency and precision in various applications, particularly within the landscaping and gardening sector. Known for its robust performance and innovative features, the Snapper 020230 has quickly gained popularity among both professionals and DIY enthusiasts.

One of the standout features of the Snapper 020230 is its powerful engine. Equipped with a reliable Briggs & Stratton engine, this tool delivers consistent power, making it capable of handling tough mowing tasks with ease. The engine is designed for optimal performance, offering high torque and fuel efficiency, allowing users to achieve longer operating times without frequent refueling.

The design of the Snapper 020230 emphasizes user comfort and control. It boasts an ergonomic handle that provides a comfortable grip, reducing fatigue during prolonged use. The adjustable height settings allow users to customize the cutting height according to their preferences, ensuring a clean and even cut every time.

Another significant characteristic is the cutting deck, which measures 21 inches in width. This size is perfectly balanced for maneuverability and efficiency, allowing users to navigate tight spaces while still covering substantial ground. The deck design also incorporates a mulching feature, enabling grass clippings to be finely chopped and returned to the lawn, promoting healthier growth.

In addition to its physical features, the Snapper 020230 integrates modern technologies that enhance its functionality. The easy-start system is designed to minimize the effort needed to start the engine, ensuring that users can get to work quickly. Moreover, the dual-bagging system enables efficient collection of grass clippings, reducing clean-up time.

Durability is another key characteristic of the Snapper 020230. Constructed with high-quality materials, this tool is built to withstand the rigors of regular use in challenging outdoor conditions. Its rust-resistant components ensure longevity while maintaining peak performance through various weather scenarios.

Overall, the Snapper 020230 stands out for its powerful engine, user-friendly design, and advanced technologies. Whether for commercial landscaping projects or personal gardening, this tool is engineered to deliver exceptional results, making it a worthy investment for anyone looking to enhance their lawn care experience. With its combination of efficiency, durability, and innovative features, the Snapper 020230 is a reliable choice for any outdoor enthusiast.
Top Page Image Contents