Snapper 020230 user manual Unintentional sparking can result in fire or electric shock

Page 4

2650 PSI Pressure Washer

WARNING

Running engines produce heat.Temperature of muffler and nearby areas can reach or exceed 150°F (65°C).

Severe burns can occur on contact.

Combustible debris, such as leaves, grass, brush, etc. can catch fire.

•DO NOT touch hot surfaces and avoid hot exhaust gases.

•Allow equipment to cool before touching.

•The pressure washer must be at least 5 feet from structures having combustible walls and/or other combustible materials.

•Keep at least 3 feet of clearance on all sides of pressure washer for adequate cooling, maintenance and servicing.

•Reflective exhaust heat may damage fuel tank causing fire.

•Code of Federal Regulation (CFR) Title 36 Parks, Forests, and Public Property require equipment powered by an internal combustion engine to have a spark arrester, maintained in effective working order, complying to USDA Forest service standard 5100-1C or later revision. In the State of California a spark arrester is required under section 4442 of the California Public resources code. Other states may have similar laws.

WARNING

Starter and other rotating parts can entangle hands, hair, clothing, or accessories.

•DO NOT wear loose clothing, jewelry or anything that may be caught in the starter or other rotating parts.

•Tie up long hair and remove jewelry.

WARNING

Unintentional sparking can result in fire or electric shock.

WHEN ADJUSTING OR MAKING REPAIRS TO YOUR PRESSURE WASHER

•Disconnect spark plug wire from spark plug and place wire where it cannot contact spark plug.

WHEN TESTING FOR ENGINE SPARK

•Use approved spark plug tester.

•DO NOT check for spark with spark plug removed.

WARNING

High pressure spray can cause paint chips or other particles to become airborne.

•Always wear eye protection when using this equipment or in vicinity of where equipment is in use.

CAUTION

Excessively high or low operating speeds increase risk of injury and damage to pressure washer.

•DO NOT tamper with governed speed.

•DO NOT operate pressure washer above rated pressure.

CAUTION

A pressure washer produces a high pressure spray which increases risk of injury and damage to unit.

•DO NOT secure spray gun in open position.

•DO NOT leave spray gun unattended while machine is running.

•NEVER use a spray gun which does not have a trigger lock or trigger guard in place and in working order.

•Always be certain spray gun, nozzles and accessories are correctly attached.

CAUTION

High pressure spray may damage fragile items including glass.

•DO NOT point spray gun at glass when in jet spray mode.

•NEVER aim spray gun at plants.

CAUTION

Improper treatment of pressure washer can damage it and shorten its life.

•If you have questions about intended use, ask dealer or contact Briggs & Stratton Power Products.

•NEVER operate units with broken or missing parts, or without protective housing or covers.

•DO NOT by–pass any safety device on this machine.

•Before starting pressure washer in cold weather, check all parts of the equipment to be sure ice has not formed there.

•NEVER move machine by pulling on high pressure hose. Use handle provided on unit.

•Check fuel system for leaks or signs of deterioration, such as chafed or spongy hose, loose or missing clamps, or damaged tank or cap. Correct all defects before operating pressure washer.

•This equipment is designed to be used with Briggs & Stratton Power Products authorized parts ONLY. If equipment is used with parts that DO NOT comply with minimum specifications, user assumes all risks and liabilities.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents PSI Pressure Washer Safety Rules Table of ContentsEquipment Description When Adding Fuel Operate pressure washer only outdoorsReflective exhaust heat may damage fuel tank causing fire Unintentional sparking can result in fire or electric shockKnow Your Pressure Washer Safety Goggles not shown Always use the enclosedPump equipped with Automatic Cool Down System Assembly Carton ContentsPreparing Pressure Washer for USE Remove Pressure Washer From CartonAdd Engine Oil and Fuel Connect Hose and Water Supply to PumpChecklist Before Starting Engine Connect Garden Hose to Water InletHOW to USE Your Pressure Washer How to Start Pressure WasherPressure Washer Location Pressure Washer ClearanceHow to Stop Your Pressure Washer Trigger LockHigh Pressure Cleaning and Applying Chemical How to Use Spray TipsLow Pressure Cleaning Detergent Siphoning Tube Pressure Washer RinsingAutomatic Cool Down System Thermal ReliefGeneral Maintenance Recommendations SpecificationsPressure Washer Maintenance Nozzle Maintenance Ring MaintenanceEngine Maintenance Pump MaintenanceChanging Pump Oil Change pump oil as followsAlways wear eye protection when using PumpSaver Preparing the Unit for StorageStoring the Engine Protecting the PumpPSI Pressure Washer Troubleshooting Problem Cause CorrectionSnapper Owner Warranty Policy Effective August 1 About your equipment warrantyEquipment Consumer Use Commercial Use Portable Generator Years 2nd year parts onlyTabla DE Contenidos Descripción DEL EquipoReglas DE Seguridad AdvertenciaCuando Añada Combustible Precaución Conozca SU Maquina Lavadora DE Presion Perilla del Cebador Usada para arranque de motores fríosMontaje Preparando EL Lavador a Presión Para SU USORemueva el Lavador a Presión del Empaque Contenido de la CajaConecte la Manguera y el Suministro de Agua a la Bomba Agregar Aceite al Motor y GasolinaGancho del Pistola Manguera Lista DE Revision Previa AL Arranque DEL Motor Cómo Usar SU Lavadora a Presión Ubicación del Lavadora a PresiónCómo Darle Arranque a su Lavadora a Presión Espacio Libre Alrededor del Lavadora a PresiónCómo Detener su Máquina Lavadora a Presión El Pasador de la SeguridadCómo Usar las Puntas de Rocío La Presión BajaLa Presión Alta Limpieza y Aplicación del QuímicoEnjuage de la Máquina Lavadora a Presión Limpiando el TuboSistema de Enfriamiento Automático Alivio Térmico Para EnjuageRecomendaciones Generales EspecificacionesMantenimiento DE LA Maquina Lavadora a Presion Mantenimiento de la Boquilla Mantenimiento de los Anillos OMantenimiento DEL Motor Mantenimiento de la BombaCambio del aceite de la bomba Cambie el aceite como se indica a continuaciónAlmacenando EL Motor Preparando LA Unidad Para SU AlmacenamientoProteger la Bomba Reparacion DE Averias Efectiva desde el 1 ro de Agosto Equipo Para Uso Del Consumidor Para Uso ComercialGenerador Portátil Año

020230 specifications

Snapper 020230 is an advanced tool designed specifically for efficiency and precision in various applications, particularly within the landscaping and gardening sector. Known for its robust performance and innovative features, the Snapper 020230 has quickly gained popularity among both professionals and DIY enthusiasts.

One of the standout features of the Snapper 020230 is its powerful engine. Equipped with a reliable Briggs & Stratton engine, this tool delivers consistent power, making it capable of handling tough mowing tasks with ease. The engine is designed for optimal performance, offering high torque and fuel efficiency, allowing users to achieve longer operating times without frequent refueling.

The design of the Snapper 020230 emphasizes user comfort and control. It boasts an ergonomic handle that provides a comfortable grip, reducing fatigue during prolonged use. The adjustable height settings allow users to customize the cutting height according to their preferences, ensuring a clean and even cut every time.

Another significant characteristic is the cutting deck, which measures 21 inches in width. This size is perfectly balanced for maneuverability and efficiency, allowing users to navigate tight spaces while still covering substantial ground. The deck design also incorporates a mulching feature, enabling grass clippings to be finely chopped and returned to the lawn, promoting healthier growth.

In addition to its physical features, the Snapper 020230 integrates modern technologies that enhance its functionality. The easy-start system is designed to minimize the effort needed to start the engine, ensuring that users can get to work quickly. Moreover, the dual-bagging system enables efficient collection of grass clippings, reducing clean-up time.

Durability is another key characteristic of the Snapper 020230. Constructed with high-quality materials, this tool is built to withstand the rigors of regular use in challenging outdoor conditions. Its rust-resistant components ensure longevity while maintaining peak performance through various weather scenarios.

Overall, the Snapper 020230 stands out for its powerful engine, user-friendly design, and advanced technologies. Whether for commercial landscaping projects or personal gardening, this tool is engineered to deliver exceptional results, making it a worthy investment for anyone looking to enhance their lawn care experience. With its combination of efficiency, durability, and innovative features, the Snapper 020230 is a reliable choice for any outdoor enthusiast.
Top Page Image Contents