Snapper 020230 user manual Preparing the Unit for Storage, Storing the Engine, Protecting the Pump

Page 16

2650 PSI Pressure Washer

PREPARING THE UNIT FOR STORAGE

Water should not remain in the unit for long periods of time. Sediments or minerals can deposit on pump parts and “freeze” pump action. If you do not plan to use the pressure washer for more than 30 days, follow this procedure:

1.Flush detergent siphoning tube by placing the filter into a pail of clean water while running pressure washer in low pressure mode. Flush for one to two minutes.

2.Shut off the engine and let it cool, then remove high pressure and garden hoses. Disconnect spark plug wire from spark plug.

3.Empty the pump of liquids by pulling the engine recoil handle about 6 times.This should remove most of the liquid in the pump.

4.Use pump saver to prevent corrosion build up and freezing of pump.

5.Store unit in a clean, dry area.

Protecting the Pump

To protect the pump from damage caused by mineral deposits or freezing, use PumpSaver to treat pump.This prevents freeze damage and lubricates pistons and seals.

NOTE: PumpSaver is available as an optional accessory. It is not included with the pressure washer. Contact the nearest authorized service center to purchase PumpSaver.

CAUTION

You must protect your unit from freezing temperatures.

•Failure to do so will permanently damage your pump and render your unit inoperable.

•Freeze damage is not covered under warranty.

CAUTION

Read and follow all cautions and warnings on the PumpSaver can label.

• Always wear eye protection when using PumpSaver.

CAUTION

PumpSaver will drip from pump after treatment and will stain wood and concrete.

• Protect surfaces from dripping PumpSaver.

To use PumpSaver, make sure the pressure washer is turned off and disconnected from supply water. Read and follow all instructions and warnings given on the PumpSaver container.

NOTE: If PumpSaver is not available, draw RV antifreeze (non-alcohol) into the pump by pouring the solution into a 3-foot section of garden hose connected to inlet adapter and pulling recoil handle twice.

STORING THE ENGINE

See the engine user’s manual for instructions on how to properly prepare the engine for storage.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents PSI Pressure Washer Safety Rules Table of ContentsEquipment Description When Adding Fuel Operate pressure washer only outdoorsReflective exhaust heat may damage fuel tank causing fire Unintentional sparking can result in fire or electric shockKnow Your Pressure Washer Safety Goggles not shown Always use the enclosedPump equipped with Automatic Cool Down System Assembly Carton ContentsPreparing Pressure Washer for USE Remove Pressure Washer From CartonAdd Engine Oil and Fuel Connect Hose and Water Supply to PumpChecklist Before Starting Engine Connect Garden Hose to Water InletHOW to USE Your Pressure Washer How to Start Pressure WasherPressure Washer Location Pressure Washer ClearanceHow to Stop Your Pressure Washer Trigger LockHigh Pressure Cleaning and Applying Chemical How to Use Spray TipsLow Pressure Cleaning Detergent Siphoning Tube Pressure Washer RinsingAutomatic Cool Down System Thermal ReliefGeneral Maintenance Recommendations SpecificationsPressure Washer Maintenance Nozzle Maintenance Ring MaintenanceEngine Maintenance Pump MaintenanceChanging Pump Oil Change pump oil as followsAlways wear eye protection when using PumpSaver Preparing the Unit for StorageStoring the Engine Protecting the PumpPSI Pressure Washer Troubleshooting Problem Cause CorrectionSnapper Owner Warranty Policy Effective August 1 About your equipment warrantyEquipment Consumer Use Commercial Use Portable Generator Years 2nd year parts onlyTabla DE Contenidos Descripción DEL EquipoReglas DE Seguridad AdvertenciaCuando Añada Combustible Precaución Conozca SU Maquina Lavadora DE Presion Perilla del Cebador Usada para arranque de motores fríosMontaje Preparando EL Lavador a Presión Para SU USORemueva el Lavador a Presión del Empaque Contenido de la CajaConecte la Manguera y el Suministro de Agua a la Bomba Agregar Aceite al Motor y GasolinaGancho del Pistola Manguera Lista DE Revision Previa AL Arranque DEL Motor Cómo Usar SU Lavadora a Presión Ubicación del Lavadora a PresiónCómo Darle Arranque a su Lavadora a Presión Espacio Libre Alrededor del Lavadora a PresiónCómo Detener su Máquina Lavadora a Presión El Pasador de la SeguridadCómo Usar las Puntas de Rocío La Presión BajaLa Presión Alta Limpieza y Aplicación del QuímicoEnjuage de la Máquina Lavadora a Presión Limpiando el TuboSistema de Enfriamiento Automático Alivio Térmico Para EnjuageRecomendaciones Generales EspecificacionesMantenimiento DE LA Maquina Lavadora a Presion Mantenimiento de la Boquilla Mantenimiento de los Anillos OMantenimiento DEL Motor Mantenimiento de la BombaCambio del aceite de la bomba Cambie el aceite como se indica a continuaciónAlmacenando EL Motor Preparando LA Unidad Para SU AlmacenamientoProteger la Bomba Reparacion DE Averias Efectiva desde el 1 ro de Agosto Equipo Para Uso Del Consumidor Para Uso ComercialGenerador Portátil Año

020230 specifications

Snapper 020230 is an advanced tool designed specifically for efficiency and precision in various applications, particularly within the landscaping and gardening sector. Known for its robust performance and innovative features, the Snapper 020230 has quickly gained popularity among both professionals and DIY enthusiasts.

One of the standout features of the Snapper 020230 is its powerful engine. Equipped with a reliable Briggs & Stratton engine, this tool delivers consistent power, making it capable of handling tough mowing tasks with ease. The engine is designed for optimal performance, offering high torque and fuel efficiency, allowing users to achieve longer operating times without frequent refueling.

The design of the Snapper 020230 emphasizes user comfort and control. It boasts an ergonomic handle that provides a comfortable grip, reducing fatigue during prolonged use. The adjustable height settings allow users to customize the cutting height according to their preferences, ensuring a clean and even cut every time.

Another significant characteristic is the cutting deck, which measures 21 inches in width. This size is perfectly balanced for maneuverability and efficiency, allowing users to navigate tight spaces while still covering substantial ground. The deck design also incorporates a mulching feature, enabling grass clippings to be finely chopped and returned to the lawn, promoting healthier growth.

In addition to its physical features, the Snapper 020230 integrates modern technologies that enhance its functionality. The easy-start system is designed to minimize the effort needed to start the engine, ensuring that users can get to work quickly. Moreover, the dual-bagging system enables efficient collection of grass clippings, reducing clean-up time.

Durability is another key characteristic of the Snapper 020230. Constructed with high-quality materials, this tool is built to withstand the rigors of regular use in challenging outdoor conditions. Its rust-resistant components ensure longevity while maintaining peak performance through various weather scenarios.

Overall, the Snapper 020230 stands out for its powerful engine, user-friendly design, and advanced technologies. Whether for commercial landscaping projects or personal gardening, this tool is engineered to deliver exceptional results, making it a worthy investment for anyone looking to enhance their lawn care experience. With its combination of efficiency, durability, and innovative features, the Snapper 020230 is a reliable choice for any outdoor enthusiast.
Top Page Image Contents