Snapper 020230 Assembly, Preparing Pressure Washer for USE, Remove Pressure Washer From Carton

Page 6

2650 PSI Pressure Washer

ASSEMBLY

IMPORTANT: Read entire user’s manual before you attempt to assemble or operate your new pressure washer.

Remove Pressure Washer From Carton

1.Remove parts bag packed with pressure washer.

2.Slice two corners at end of carton from top to bottom so panel can be folded down flat, then remove all packing material.

3.Roll pressure washer out of carton.

Carton Contents

Items in the carton include:

•Main Unit

•Safety Goggles

•Handle

•High Pressure Hose

•Spray Gun

•Nozzle Extension with Quick Connect Fitting

•Oil Bottle

•Parts Bag (which includes the following):

•User’s Manual

•Engine User’s Manual

•Bag containing 4 multi–colored Quick Connect Spray Tips

•Owner’s Registration Card

•Handle Fastening Hardware Kit (which includes):

•Carriage Bolts (2)

•“L” Hooks (2)

•Plastic Knobs (4)

PREPARING PRESSURE WASHER FOR USE

If you have any problems with the assembly of your pressure washer or if parts are missing or damaged, call the pressure washer helpline at 1-800-317-7833.

To prepare your pressure washer for operation, you will need to perform these tasks:

1.Fill out and send in registration card.

2.Attach handle to main unit.

3.Add oil to engine crankcase.

4.Add fuel to fuel tank.

5.Connect high pressure hose to spray gun and pump.

6.Connect water supply to pump.

7.Attach nozzle extension to spray gun.

Attach Handle to Unit

1.Place handle assembly onto handle supports connected to main unit. Make sure holes in handle align with holes on handle supports (Figure 1).

Figure 1 — Attach Handle to Base

Handle

Align Holes

Handle

Supports

NOTE: It may be necessary to move the handle supports from side to side in order to align the handle so it will slide over the handle supports.

2.Insert carriage bolts through holes from outside of the unit and attach a plastic knob from inside of unit (Figure 2).Tighten by hand.

Figure 2 — Secure Handle

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents PSI Pressure Washer Table of Contents Safety RulesEquipment Description When Adding Fuel Operate pressure washer only outdoorsReflective exhaust heat may damage fuel tank causing fire Unintentional sparking can result in fire or electric shockSafety Goggles not shown Always use the enclosed Know Your Pressure WasherPump equipped with Automatic Cool Down System Preparing Pressure Washer for USE AssemblyCarton Contents Remove Pressure Washer From CartonAdd Engine Oil and Fuel Connect Hose and Water Supply to PumpChecklist Before Starting Engine Connect Garden Hose to Water InletPressure Washer Location HOW to USE Your Pressure WasherHow to Start Pressure Washer Pressure Washer ClearanceHow to Stop Your Pressure Washer Trigger LockHow to Use Spray Tips High Pressure Cleaning and Applying ChemicalLow Pressure Automatic Cool Down System Cleaning Detergent Siphoning TubePressure Washer Rinsing Thermal ReliefSpecifications General Maintenance RecommendationsPressure Washer Maintenance Nozzle Maintenance Ring MaintenanceChanging Pump Oil Engine MaintenancePump Maintenance Change pump oil as followsStoring the Engine Always wear eye protection when using PumpSaverPreparing the Unit for Storage Protecting the PumpPSI Pressure Washer Troubleshooting Problem Cause CorrectionEquipment Consumer Use Commercial Use Snapper Owner Warranty Policy Effective August 1About your equipment warranty Portable Generator Years 2nd year parts onlyReglas DE Seguridad Tabla DE ContenidosDescripción DEL Equipo AdvertenciaCuando Añada Combustible Precaución Conozca SU Maquina Lavadora DE Presion Perilla del Cebador Usada para arranque de motores fríosRemueva el Lavador a Presión del Empaque MontajePreparando EL Lavador a Presión Para SU USO Contenido de la CajaAgregar Aceite al Motor y Gasolina Conecte la Manguera y el Suministro de Agua a la BombaGancho del Pistola Manguera Lista DE Revision Previa AL Arranque DEL Motor Cómo Darle Arranque a su Lavadora a Presión Cómo Usar SU Lavadora a PresiónUbicación del Lavadora a Presión Espacio Libre Alrededor del Lavadora a PresiónCómo Detener su Máquina Lavadora a Presión El Pasador de la SeguridadLa Presión Alta Cómo Usar las Puntas de RocíoLa Presión Baja Limpieza y Aplicación del QuímicoSistema de Enfriamiento Automático Alivio Térmico Enjuage de la Máquina Lavadora a PresiónLimpiando el Tubo Para EnjuageEspecificaciones Recomendaciones GeneralesMantenimiento DE LA Maquina Lavadora a Presion Mantenimiento de la Boquilla Mantenimiento de los Anillos OCambio del aceite de la bomba Mantenimiento DEL MotorMantenimiento de la Bomba Cambie el aceite como se indica a continuaciónPreparando LA Unidad Para SU Almacenamiento Almacenando EL MotorProteger la Bomba Reparacion DE Averias Generador Portátil Efectiva desde el 1 ro de AgostoEquipo Para Uso Del Consumidor Para Uso Comercial Año

020230 specifications

Snapper 020230 is an advanced tool designed specifically for efficiency and precision in various applications, particularly within the landscaping and gardening sector. Known for its robust performance and innovative features, the Snapper 020230 has quickly gained popularity among both professionals and DIY enthusiasts.

One of the standout features of the Snapper 020230 is its powerful engine. Equipped with a reliable Briggs & Stratton engine, this tool delivers consistent power, making it capable of handling tough mowing tasks with ease. The engine is designed for optimal performance, offering high torque and fuel efficiency, allowing users to achieve longer operating times without frequent refueling.

The design of the Snapper 020230 emphasizes user comfort and control. It boasts an ergonomic handle that provides a comfortable grip, reducing fatigue during prolonged use. The adjustable height settings allow users to customize the cutting height according to their preferences, ensuring a clean and even cut every time.

Another significant characteristic is the cutting deck, which measures 21 inches in width. This size is perfectly balanced for maneuverability and efficiency, allowing users to navigate tight spaces while still covering substantial ground. The deck design also incorporates a mulching feature, enabling grass clippings to be finely chopped and returned to the lawn, promoting healthier growth.

In addition to its physical features, the Snapper 020230 integrates modern technologies that enhance its functionality. The easy-start system is designed to minimize the effort needed to start the engine, ensuring that users can get to work quickly. Moreover, the dual-bagging system enables efficient collection of grass clippings, reducing clean-up time.

Durability is another key characteristic of the Snapper 020230. Constructed with high-quality materials, this tool is built to withstand the rigors of regular use in challenging outdoor conditions. Its rust-resistant components ensure longevity while maintaining peak performance through various weather scenarios.

Overall, the Snapper 020230 stands out for its powerful engine, user-friendly design, and advanced technologies. Whether for commercial landscaping projects or personal gardening, this tool is engineered to deliver exceptional results, making it a worthy investment for anyone looking to enhance their lawn care experience. With its combination of efficiency, durability, and innovative features, the Snapper 020230 is a reliable choice for any outdoor enthusiast.
Top Page Image Contents