
G1000A OPERATION MANUAL
4BASIC OPERATIONS
1.BATTERIES
Remove the battery compartment cover by pushing it in the direction of the arrow. Install two ‘AA’ batteries according to the polarity symbols (+ and
For easy removal, place the batteries on top of the
2.POWER ON/OFF/VOLUME
Turn the radio on by switching the power on/off switch (11). Use the volume knob (21) to adjust the volume.
3.FM RADIO
Select the FM band by using the band selector switch (13).
Use the tuning knob (6) to tune the radio to the desired frequency. When a strong signal is found, the TUNE indicator will light.
If you are using an earphone to listen to FM stereo, the
FM ST. LED (5) will light. Note that the frequency of the station appears in the display (3).
4.AM/SW1-8 RADIO
Select the desired band, AM or SW
5.ANTENNA
A.For AM (MW) the radio uses an internal, directional, ferrite bar antenna. Rotate the radio for best reception.
B.For FM/SW, fully extend the telescopic antenna (1). For FM, rotate it for best reception.
7