ASSEMBLY INSTRUCTIONS
Required tools
Screwdriver, small size (not supplied) for connecting high pressure hose and trigger gun.
Assembly
STEP 1:
Insert wheels into the body of the unit.
STEP 2:
Slide the transport handle into place.
OPERATING INSTRUCTIONS
STEP 1:
Connect the high pressure hose to the unit’s high pressure outlet.
STEP 2:
Insert the spray wand of your choice into the trigger gun. Press in against the spring tension and twist into locked position.
STEP 3: |
|
Install the supplied connector to the |
|
unit’s water inlet. |
|
Note: Never attach the garden hose |
|
connector to the unit’s water inlet! | |
| 1 |
| 2 |
STEP 4:
APull out the locking slide of the trigger gun handle.
BInsert the small end of the high pres- sure hose into place.
CPush the locking slide back into the trigger gun to lock the hose in posi- tion.
STEP 3:
Screw the supplied garden hose con- nector on to the end of your garden hose.
Push the garden hose connector on to the water inlet connector and make sure you hear it click into place before proceeding.
6English