Zenoah PSJ2300 owner manual SE9, Balance Unit

Page 15

 

English

 

中 文

 

 

5. Set up

5 安装

 

 

 

 

 

SE9

SE10

SE11

3.Fit the chain tensioner nut into the lower hole of the guide bar, then install the chain cover, and fasten the mounting nut to finger tightness. (SE8) (SE9)

(1)Hole

(2)Moving direction

(3)Chain tensioner nut

4.Adjust the chain tension by turning the tensioner screw until the tie straps just touch the bottom side of the bar rail. (SE10)

(1)Chain tension adjusting screw

(a) Loosen

(b) Tighten

5.Tighten the mounting nut securely with the bar tip held up (SE11) (TORQUE: 8.9~11.7 N.m./90~120 kg-cm). Then check the chain for smooth rotation and correct tension while moving it by hand. If necessary, readjustment.

(1) Tighten

3.将链条张紧螺母装到导板下部的孔

中,然后安装链条盖,并将安装螺母 拧紧至手指无法拧松的程度。

SE8)(SE9

1)孔

2)运动方向

3)链条张紧螺母

4.通过转动张紧螺钉调节链条张力, 直至系带正好碰到板轨的底部。

SE10

1)链条张力调节螺钉 (a)拧松

b)拧紧

5.握住导板顶端,紧固安装螺母。 (SE11

(扭矩:8.9_11.7N.m./90_120kg- cm)然后用手移动链条,检查链条 是否平滑旋转,张力是否合适。如果 必要请重新调节。

1)拧紧

 

 

 

警 告

 

 

WARNING

 

保持链条的张力正确非常重要。如果张

 

 

 

It is very important to maintain the

力不正确,很容易导致导板的快速磨损

proper chain tension. Rapid wear

或链条脱落。尤其是使用新链条时,请

of the guide bar or the chain

特别小心,初次使用时链条会扩张开来。

coming off easily can be caused

 

 

by improper tension. Especially

 

 

when using a new chain, take

 

 

good care of it since it should

 

 

expand when first used.

 

 

BALANCE UNIT

1.Put on strap and attach unit to strap.

2.Depending on the working posture, slide clamp up or down until unit balances and the strap fits your body.

机器的平衡

1.穿戴好肩带,然后将机器安装到肩带 上。

2.根据工作时采用的姿势,向上或向 下滑动肩带直至机器保持平衡,并使 肩带贴合您的身体。

15

Image 15
Contents PSJ2300 Contents Suspension point Stop switchChoke lever 11. 进气杆 Air cleaner cover Loop handle警告标签及用法 Working Condition 正确使用须知Using the Product Working CircumstanceWorking Plan Before Starting Engine Starting the Engine If Someone Comes MaintenanceHandling Fuel Refill after cooling the engineTransportation Beware of pinching Kickback and Pinching Safety Precautions Beware of kickbackManufacturer SE5 SE1 SE2 SE3 SE4Attaching the Pruning Mechanism SE6 SE6SE7 SE8Balance Unit SE9Chain OIL 燃料和链条油Fuel Chain oil OP1 OP2 OP3 OP4 OP5Starting Engine Cutting head will start rotating upon the engine startsChecking OIL Supply Adjusting OIL Flow RateOP6 Stopping Engine OP4Adjusting Throttle Cable OP7OP8 Adjusting Idling Speed OP9 Idle adjusting screwOP9 Maintenance Chart MaintenanceMA1 MA2MA3 MA4 MA5 MA6 MA7 MA8 SAW ChainChain type 90SG File size 32 in 4.0mm MA9 Intake air cooling vent back Intake AIR Cooling VentMaintenace Before Storage Procedures to be Performed After Every 100 Hours of USECheck Probable Causes Action Case 1. Starting failurePSJ2300 Specifications

PSJ2300 specifications

The Zenoah PSJ2300 is a high-performance handheld blower designed for professionals and landscaping enthusiasts who demand reliability and efficiency in their tools. Engineered with advanced technologies, the PSJ2300 stands out in the crowded market of outdoor power equipment, making it a go-to choice for various applications such as clearing debris, leaves, and grass clippings.

One of the main features of the Zenoah PSJ2300 is its powerful 23cc two-stroke engine, which delivers impressive blowing performance while maintaining a relatively lightweight design. This engine strikes a perfect balance between power and fuel efficiency, allowing users to operate the blower for extended periods without frequent refueling. The innovative design also ensures that the engine operates smoothly, reducing vibrations and improving overall user comfort during operation.

The blower's air volume output is a notable characteristic that enhances its performance. The PSJ2300 can achieve an air volume of 700 cubic feet per minute (CFM) at a maximum airspeed of 140 miles per hour (MPH), making it highly effective for tackling even the most stubborn debris. Whether you are dealing with wet leaves or compacted grass, the Zenoah PSJ2300 delivers consistent results.

Another key feature of the PSJ2300 is its ergonomic design. The blower is equipped with an adjustable handle that provides users with the flexibility to find their most comfortable grip. This design consideration reduces operator fatigue, allowing for prolonged use without discomfort. Additionally, the lightweight construction ensures that even extended usage can be completed without straining the user.

The Zenoah PSJ2300 also incorporates advanced anti-vibration technology, further enhancing user experience. The innovative damping system minimizes fatigue during long periods of use, allowing for precise control while reducing stress on the hands and arms. This feature is particularly appreciated by professional landscapers who often rely on this equipment for hours on end.

Maintenance is made simple with the PSJ2300, as it is designed for easy access to essential components. This ease of maintenance contributes to the longevity and reliability of the blower, ensuring that it remains a valuable tool in any landscaping arsenal.

In summary, the Zenoah PSJ2300 is a powerful and efficient handheld blower, featuring a robust two-stroke engine, impressive air volume output, ergonomic design, and user-friendly maintenance. With its blend of performance, comfort, and durability, it proves to be a reliable choice for both professional and residential use, making outdoor cleanup tasks easier and more efficient.