Zenoah PSJ2300 owner manual 燃料和链条油, Chain OIL

Page 16

 

English

 

中 文

 

 

6. Fuel and chain oil

6. 燃料和链条油

 

 

 

 

 

WARNING

Gasoline is very flammable. Avoid smoking or bringing any flame or sparks near fuel.

Wipe up all spills before starting the engine.

Make sure to stop the engine and allow it cool before refueling the unit.

Keep open flames away from the area where fuel is handled or stored.

警 告

・汽油为易燃品

不得在燃料附近吸烟或玩弄带有火焰 和火星物。

・在启动引擎之前整理好周围的散乱物

品。

・在加油之前必须确认引擎停止并冷却。 ・在加油和储油地区必须严禁烟火。

IMPORTANT

Never use oil for 4 cycle engine use or water cooled 2-cycle engine.

Never use "FUEL WITH NO OIL (RAW GASOLINE)".

Never use fuel laced with water.

Mixed fuels which have been left unused for a period of one month or more may clog the carburetor or result in the engine failing to operate properly. Put remained fuel into an air-tight container and keep it in the dark and cool room.

Please ask for “mixed gasoline for air-cooled 2-cycle engines” at your nearest gas station, or use fuel made by putting unleaded gasoline for automobiles and air- cooled 2-cycle engine oil into a mixing container in accordance with the following ratios and then shaking to mix well.

Mixing ratios:

When using Zenoah genuine 2-cycle oil (FC grade):

50:1 (100 ml of oil for

every 5 liters of gasoline)

When using commercially available

2-cycle oil (FB grade): 25:1(160 ml of oil for

every 4 liters of gasoline)

CHAIN OIL

Use motor oil SAE #10W-30 all year round or SAE #30 ~ #40 in summer and SAE #20 in winter.

重 要

・不能使用4冲程机油,或水冷2冲程 引擎机油。

・不能使用未与机油混合的燃料(普通

汽油)。

・不能使用混入水的燃料。

・一个月以上没有使用过的混合燃料有 可能妨碍化油器工作,或者引起引擎 工作不良。请把剩下的燃料装在密闭 容器内,并放置在阴凉爽处。

・燃料可使用在附近加油站购买的气冷 2冲程引擎用混合汽油,或者将汽车 用无铅汽油和气冷2冲程引擎机油按 以下比例倒入同一容器,好好摇晃容 器,混合配制的燃料。

混合比例:

如使用Zenoah 2冲程纯正机油(FC):

50:1(汽油5L:机油100ml

如使用市面销售的2冲程机油(FB): 25:1(汽油4L:机油160ml

链条油

使用电动机润滑油SAE # 10W-30(整 年使用),或SAE #30#40(夏天使 用)和SAE #20(冬天使用)。

NOTE

Do not use wasted or regenerated oil that can cause damage to the oil pump.

补 充

请勿使用报废或再生的机油,这类机油 会致使油泵损坏。

16

Image 16
Contents PSJ2300 Contents Stop switch Choke lever 11. 进气杆 Air cleaner coverLoop handle Suspension point警告标签及用法 正确使用须知 Working ConditionWorking Circumstance Using the ProductWorking Plan Before Starting Engine Starting the Engine Maintenance If Someone ComesRefill after cooling the engine Handling FuelTransportation Kickback and Pinching Safety Precautions Beware of kickback Beware of pinchingManufacturer SE1 SE2 SE3 SE4 SE5SE6 SE7SE8 Attaching the Pruning Mechanism SE6SE9 Balance Unit燃料和链条油 Chain OILOP1 OP2 OP3 OP4 OP5 Starting EngineCutting head will start rotating upon the engine starts Fuel Chain oilAdjusting OIL Flow Rate OP6Stopping Engine OP4 Checking OIL SupplyOP7 Adjusting Throttle CableOP8 Idle adjusting screw Adjusting Idling Speed OP9OP9 Maintenance Maintenance ChartMA2 MA1MA3 MA4 MA5 SAW Chain MA6 MA7 MA8Chain type 90SG File size 32 in 4.0mm MA9 Intake AIR Cooling Vent Intake air cooling vent backProcedures to be Performed After Every 100 Hours of USE Maintenace Before StorageCase 1. Starting failure Check Probable Causes ActionSpecifications PSJ2300

PSJ2300 specifications

The Zenoah PSJ2300 is a high-performance handheld blower designed for professionals and landscaping enthusiasts who demand reliability and efficiency in their tools. Engineered with advanced technologies, the PSJ2300 stands out in the crowded market of outdoor power equipment, making it a go-to choice for various applications such as clearing debris, leaves, and grass clippings.

One of the main features of the Zenoah PSJ2300 is its powerful 23cc two-stroke engine, which delivers impressive blowing performance while maintaining a relatively lightweight design. This engine strikes a perfect balance between power and fuel efficiency, allowing users to operate the blower for extended periods without frequent refueling. The innovative design also ensures that the engine operates smoothly, reducing vibrations and improving overall user comfort during operation.

The blower's air volume output is a notable characteristic that enhances its performance. The PSJ2300 can achieve an air volume of 700 cubic feet per minute (CFM) at a maximum airspeed of 140 miles per hour (MPH), making it highly effective for tackling even the most stubborn debris. Whether you are dealing with wet leaves or compacted grass, the Zenoah PSJ2300 delivers consistent results.

Another key feature of the PSJ2300 is its ergonomic design. The blower is equipped with an adjustable handle that provides users with the flexibility to find their most comfortable grip. This design consideration reduces operator fatigue, allowing for prolonged use without discomfort. Additionally, the lightweight construction ensures that even extended usage can be completed without straining the user.

The Zenoah PSJ2300 also incorporates advanced anti-vibration technology, further enhancing user experience. The innovative damping system minimizes fatigue during long periods of use, allowing for precise control while reducing stress on the hands and arms. This feature is particularly appreciated by professional landscapers who often rely on this equipment for hours on end.

Maintenance is made simple with the PSJ2300, as it is designed for easy access to essential components. This ease of maintenance contributes to the longevity and reliability of the blower, ensuring that it remains a valuable tool in any landscaping arsenal.

In summary, the Zenoah PSJ2300 is a powerful and efficient handheld blower, featuring a robust two-stroke engine, impressive air volume output, ergonomic design, and user-friendly maintenance. With its blend of performance, comfort, and durability, it proves to be a reliable choice for both professional and residential use, making outdoor cleanup tasks easier and more efficient.