Zenoah PSJ2300 OP1 OP2 OP3 OP4 OP5, Starting Engine, Fuel Chain oil, Choke lever Close Open

Page 17

 

English

 

中 文

 

 

7. Operation

7. 操作

 

 

 

 

 

OP1

OP2

OP3

OP4

(1)

OP5

 

STARTING ENGINE

WARNING

The cutting head will start rotating upon the engine starts.

1.Feed fuel and chain oil into their respective tanks and tighten the caps securely. (OP1)

(1)Fuel

(2)Chain oil

2.Rest the unit on a flat, firm place. Keep the cutting head off the ground and clear of surrounding objects as it will start rotating upon starting of the engine.

3.Push the pump several times until overflown fuel flows out in the clear tube. (OP2)

4.Move the choke lever to the closed position. (OP3)

(1)Choke lever

(2)Close

(3)Open

5.Set the stop switch to the "RUN" position.

Place the unit on a flat place. Keep the cutting head clear of everything around it. (OP4)

(1) Stop switch

6.While holding the unit firmly, pull out the starter rope quickly until engine fires. (OP5)

IMPORTANT

Avoid pulling the rope to its end or returning it by releasing the knob. Such actions can cause starter failures.

7.Move the choke lever downward to open the choke. And restart the engine. (OP3)

8.Allow the engine to warm up for a several minutes before starting operation.

启动引擎

警 告

引擎启动时切割头将开始旋转。

1.将燃料和链条油分别加入各自的油箱 中,然后牢牢地拧紧油箱盖子。

OP1

1)燃料 2)链条油

2.将机器放置在平坦、坚固的地方。 由于引擎启动时切割头将开始旋转。

因此请使其指向地面并保持周围没有 异物。

3.推泵数次,直至清洁的管子中溢出 燃料。(OP2

4.将进气杆移至关闭位置。(OP3

1)进气杆 (2)关闭 (3)开通

5.将止动开关设至“RUN(运行)位置。

将机器放置在平坦、坚固的地方。 保持切割头周围没有任何异物。

OP4

1)止动开关

6.紧握住机器,快速抽拉起动器的拉

绳直至引擎着火。(OP5

重 要

・避免将拉绳拉到底或通过松开旋钮使

其返回。否则会导致起动器失败。

7.向下操作进气杆以开通进气门。然 后重新启动引擎。(OP3

8.在开始操作之前请先让引擎预热几 分钟。

17

Image 17
Contents PSJ2300 Contents Choke lever 11. 进气杆 Air cleaner cover Stop switchLoop handle Suspension point警告标签及用法 Working Condition 正确使用须知Working Plan Using the ProductWorking Circumstance Before Starting Engine Starting the Engine If Someone Comes MaintenanceTransportation Handling FuelRefill after cooling the engine Beware of pinching Kickback and Pinching Safety Precautions Beware of kickbackManufacturer SE5 SE1 SE2 SE3 SE4SE7 SE6SE8 Attaching the Pruning Mechanism SE6Balance Unit SE9Chain OIL 燃料和链条油Starting Engine OP1 OP2 OP3 OP4 OP5Cutting head will start rotating upon the engine starts Fuel Chain oilOP6 Adjusting OIL Flow RateStopping Engine OP4 Checking OIL SupplyOP8 Adjusting Throttle CableOP7 OP9 Adjusting Idling Speed OP9Idle adjusting screw Maintenance Chart MaintenanceMA3 MA4 MA5 MA1MA2 Chain type 90SG File size 32 in 4.0mm MA6 MA7 MA8SAW Chain MA9 Intake air cooling vent back Intake AIR Cooling VentMaintenace Before Storage Procedures to be Performed After Every 100 Hours of USECheck Probable Causes Action Case 1. Starting failurePSJ2300 Specifications

PSJ2300 specifications

The Zenoah PSJ2300 is a high-performance handheld blower designed for professionals and landscaping enthusiasts who demand reliability and efficiency in their tools. Engineered with advanced technologies, the PSJ2300 stands out in the crowded market of outdoor power equipment, making it a go-to choice for various applications such as clearing debris, leaves, and grass clippings.

One of the main features of the Zenoah PSJ2300 is its powerful 23cc two-stroke engine, which delivers impressive blowing performance while maintaining a relatively lightweight design. This engine strikes a perfect balance between power and fuel efficiency, allowing users to operate the blower for extended periods without frequent refueling. The innovative design also ensures that the engine operates smoothly, reducing vibrations and improving overall user comfort during operation.

The blower's air volume output is a notable characteristic that enhances its performance. The PSJ2300 can achieve an air volume of 700 cubic feet per minute (CFM) at a maximum airspeed of 140 miles per hour (MPH), making it highly effective for tackling even the most stubborn debris. Whether you are dealing with wet leaves or compacted grass, the Zenoah PSJ2300 delivers consistent results.

Another key feature of the PSJ2300 is its ergonomic design. The blower is equipped with an adjustable handle that provides users with the flexibility to find their most comfortable grip. This design consideration reduces operator fatigue, allowing for prolonged use without discomfort. Additionally, the lightweight construction ensures that even extended usage can be completed without straining the user.

The Zenoah PSJ2300 also incorporates advanced anti-vibration technology, further enhancing user experience. The innovative damping system minimizes fatigue during long periods of use, allowing for precise control while reducing stress on the hands and arms. This feature is particularly appreciated by professional landscapers who often rely on this equipment for hours on end.

Maintenance is made simple with the PSJ2300, as it is designed for easy access to essential components. This ease of maintenance contributes to the longevity and reliability of the blower, ensuring that it remains a valuable tool in any landscaping arsenal.

In summary, the Zenoah PSJ2300 is a powerful and efficient handheld blower, featuring a robust two-stroke engine, impressive air volume output, ergonomic design, and user-friendly maintenance. With its blend of performance, comfort, and durability, it proves to be a reliable choice for both professional and residential use, making outdoor cleanup tasks easier and more efficient.