Zenoah PSJ2300 owner manual MA6 MA7 MA8, SAW Chain, Chain type 90SG File size 32 in 4.0mm

Page 23

 

English

 

中 文

 

 

8. Maintenace

8. 检修

 

 

 

 

 

SAW CHAIN

锯链

MA6

MA7

MA8

WARNING

It is very important for smooth and safe operation to keep the cutters always sharp.

Your cutters need to be sharpened when:

Sawdust becomes powder-like.

You need extra force to saw in.

The cut way does not go straight.

Vibration increases.

Fuel consumption increases.

Cutter setting standards:

WARNING

Be sure to wear safety gloves.

Before filing:

Make sure the saw chain is held securely.

Make sure the engine is stopped.

Use a round file of proper size for your chain.

Chain type:

90SG

File size:

5/32 in (4.0mm)

Place your file on the cutter and push straight forward. Keep the file position as illustrated. (MA6)

After every cutter has been set, check the depth gauge and file it to the proper level as illustrated. (MA7)

WARNING

Be sure to round off the front edge to reduce the chance of kickback or tie-strap breakage.

(1)Appropriate gauge checker

(2)Make the shoulder round

(3)Depth gauge standard

Make sure every cutter has the same length and edge angles as illustrated. (MA8)

(4)Cutter length

(5)Filing angle

(6)Side plate angle

(7)Top plate cutting angle

警 告

保持刀具锋利对于顺利平安作业是极其 重要的。

当出现以下情况时,你的刀具需要磨 削。

・锯屑变成粉状。

・锯削时需施加更大的力气。 ・切割方向不直。

・振动增加。

・燃料消耗增加。

刀具安装标准:

警 告

请务必戴安全手套。

安装之前:

・确保锯链安装得牢靠。 ・确保引擎停止。

・使用链条用的合适尺寸的圆锉。

链条型号: 90SG

圆锉尺寸:5/32in4.0mm

把圆锉放在刀具上,笔直往前推。圆锉 的位置如图所示。(MA6

全部刀具安装完毕后,核对一下深度表, 将其调节至如图所示的适当深度。

MA7

警 告

请务必把前缘磨光,以减少反弹或者栓 带断裂的可能性。

1)适当的深度表核对器 (2)使轴肩成圆形

3)深度表标准

如图所示,务必使所有刀具的深度和缘 角相同。(MA8

4)刀具长度 (5)安装角度 (6)侧板角度 (7)顶板切削角

23

Image 23
Contents PSJ2300 Contents Suspension point Stop switchChoke lever 11. 进气杆 Air cleaner cover Loop handle警告标签及用法 Working Condition 正确使用须知Working Plan Using the ProductWorking Circumstance Before Starting Engine Starting the Engine If Someone Comes MaintenanceTransportation Handling FuelRefill after cooling the engine Beware of pinching Kickback and Pinching Safety Precautions Beware of kickbackManufacturer SE5 SE1 SE2 SE3 SE4Attaching the Pruning Mechanism SE6 SE6SE7 SE8Balance Unit SE9Chain OIL 燃料和链条油Fuel Chain oil OP1 OP2 OP3 OP4 OP5Starting Engine Cutting head will start rotating upon the engine startsChecking OIL Supply Adjusting OIL Flow RateOP6 Stopping Engine OP4OP8 Adjusting Throttle CableOP7 OP9 Adjusting Idling Speed OP9Idle adjusting screw Maintenance Chart MaintenanceMA3 MA4 MA5 MA1MA2 Chain type 90SG File size 32 in 4.0mm MA6 MA7 MA8SAW Chain MA9 Intake air cooling vent back Intake AIR Cooling VentMaintenace Before Storage Procedures to be Performed After Every 100 Hours of USECheck Probable Causes Action Case 1. Starting failurePSJ2300 Specifications

PSJ2300 specifications

The Zenoah PSJ2300 is a high-performance handheld blower designed for professionals and landscaping enthusiasts who demand reliability and efficiency in their tools. Engineered with advanced technologies, the PSJ2300 stands out in the crowded market of outdoor power equipment, making it a go-to choice for various applications such as clearing debris, leaves, and grass clippings.

One of the main features of the Zenoah PSJ2300 is its powerful 23cc two-stroke engine, which delivers impressive blowing performance while maintaining a relatively lightweight design. This engine strikes a perfect balance between power and fuel efficiency, allowing users to operate the blower for extended periods without frequent refueling. The innovative design also ensures that the engine operates smoothly, reducing vibrations and improving overall user comfort during operation.

The blower's air volume output is a notable characteristic that enhances its performance. The PSJ2300 can achieve an air volume of 700 cubic feet per minute (CFM) at a maximum airspeed of 140 miles per hour (MPH), making it highly effective for tackling even the most stubborn debris. Whether you are dealing with wet leaves or compacted grass, the Zenoah PSJ2300 delivers consistent results.

Another key feature of the PSJ2300 is its ergonomic design. The blower is equipped with an adjustable handle that provides users with the flexibility to find their most comfortable grip. This design consideration reduces operator fatigue, allowing for prolonged use without discomfort. Additionally, the lightweight construction ensures that even extended usage can be completed without straining the user.

The Zenoah PSJ2300 also incorporates advanced anti-vibration technology, further enhancing user experience. The innovative damping system minimizes fatigue during long periods of use, allowing for precise control while reducing stress on the hands and arms. This feature is particularly appreciated by professional landscapers who often rely on this equipment for hours on end.

Maintenance is made simple with the PSJ2300, as it is designed for easy access to essential components. This ease of maintenance contributes to the longevity and reliability of the blower, ensuring that it remains a valuable tool in any landscaping arsenal.

In summary, the Zenoah PSJ2300 is a powerful and efficient handheld blower, featuring a robust two-stroke engine, impressive air volume output, ergonomic design, and user-friendly maintenance. With its blend of performance, comfort, and durability, it proves to be a reliable choice for both professional and residential use, making outdoor cleanup tasks easier and more efficient.