Zenoah EX-RMS manual OP1 OP2, BREAK-IN Operation, Properly Dressed Operator OP1

Page 4

OP1

OP2

English

2. Operation

BREAK-IN OPERATION

The Properly Dressed Operator (OP1)

(1)ALWAYS wear hearing protective devices.

(2)ALWAYS wear eye protection such as goggles or safety glasses.

(3)ALWAYS wear a mask to protect against dust or other airborne particles.

(4)ALWAYS wear close fitting clothes. Gloves offer added protection and are strongly recommended. Do not wear clothing or jewelry that could get caught in machinery.

(5)ALWAYS wear leather or heavy-rubber shoes. NEVER work barefooted!

(6)BEWARE of thrown debris!

(7)DIRECTION OF ROTATION

The RedMax Sweeper works best when its rubber fins can quickly slide or "skim" over the surface being swept.

New or replacement sweeper belts tend to grip or drag on hard surfaces, and should be thoroughly broken in or "scuffed" before the broom is actually put to work.

Break-in is easily accomplished by operating the RedMax Sweeper at full throttle for 3 to 5 minutes in loose gravel or similar abrasive material. Once broken in, a RedMax Sweeper will effortlessly move an amazing variety of materials, ranging from snow or standing water to heavier objects such as wood chips or gravel.

Experience will help you understand the operating principles of the RedMax Sweeper, but safe operation must be practiced from the start.

OPERATING TECHNIQUES (OP2)(OP3)(OP4) Operate the RedMax Sweeper at or near full throttle with its sweeper fins resting on the work surface.

NOTE

It is both tiring and unnecessary to lift or hold the fins from the work surface during sweeping.

When sweeping narrow areas such as sidewalks, the RedMax Sweeper can be used to throw material directly ahead of the operator. Clearing wider areas may require sweeping at an angle to create windrows to one side of the path being cleared.

4

Image 4
Contents EX-RMS Set up SE3 Install the Handle SE1Sweeper Assembly SE3 SE1Assemblage Montaje Operation OP1 OP2BREAK-IN Operation Properly Dressed Operator OP1Fonctionnement Uso Avant DE Commencer L’UTILISATIONAntes DE Empezar a Utilizar LA Máquina Técnicas DE Funcionamiento OP2 OP3Operating and Safety Tips OP5 OP3 OP4 OP5Direction of rotation Maintain a shallow angle to the work surfaceSeguridad OP5 General Safety Instructions Never make unauthorized attachment installations Stay AlertYOU Must Always Guard Against Thrown Debris Avoid low rpm operationInstructions Generales DE Securite Instrucciones Generales DE SeguridadMaintenance MA1Gearcase Lubrication Replacing the Gearcase OIL MA1Cambio DEL Aceite DE LA Caja DE Cambios Remplacement DE L’HUILE DU Carter ’ENGRENAGE MA1Entretien Mantenimiento Maintenance Reconecte el cable de la bujía de encendido Maintenance Chart EntretienTableau D’ENTRETIEN Tabla DE MantenimientoParts list 4. Liste des pièces 4. Lista de piezas NotaParts list Pipe Comp Komatsu Zenoah America INC