Zenoah BCX2600S manual MA5 MA6 MA7, AIR Filter

Page 21

9. Maintenance

MA5

MA6

MA7

on the housing, press the cap against the housing until it clicks.

WARNING

•Make sure that the engine has stopped and is cool before performing any service to the machine. Contact with moving cutting head or hot muffler may result in a personal injury.

■AIR FILTER

IMPORTANT

Your unit's air filter is one of the most important areas to maintain. If it is not maintained, you will void the warranty.

1.Remove the air filter cover by pulling up the two tabs on the bottom back of the cover, then pull out and up. (MA5)

2.Remove the air the filter. (MA5)

3.Wash the filter in detergent and water. Rinse the filler thoroughly and allow it to dry. (MA6)

4.Reinstall the filter. (MA5)

5.Reinstall the air filter cover by positioning the notch on top of the air filter cover onto the tab at the top of the back plate. (MA7)

6.Using two fingers on either side of the air filter cover and back plate, squeeze together until the cover snaps into place. (MA7)

(1) Air Filter Cover (2) Air Filter

(3) Choke Lever (4) Tab (5) Back Plate

WARNING

Never operate the machine without air filter or filter cover. Doing so could lead the engine breakdown.

21 

Image 21

Contents T3032-93110 BCX2600SPage Safety First Parts location Avertissement Symbols on the machine EmplacementPosition For safe operation Working ConditionWorking Circumstance Working Plan Starting the Engine Before Starting the EngineUsing the Product Maintenance If Someone ComesHandling Fuel Transportation Set up Balance Unit SE5 SE6 Installing Cutting Head SE5Recommended OIL Type Oil / FuelAdding OIL to CRANKCASE-INITIAL USE SectionDefinition of Blended Fuels USE of Blended FuelsUSE of Fuel Additives OP1 OP2 OP3 Starting Engine Operation Adjusting the Wire Play OP5 Adjusting Idling Speed OP4 OP4 OP5Adjusting the Line Length OP6 Cutting Work Line Head UsageTrimming Grass and Weeds Maintenance Chart MaintenanceFor safety reasons, do not use metalreinforced line MA1 MA2 MA3 MA4AIR Filter MA5 MA6 MA7MA8 MA9 OIL Level Wear gloves to prevent injury when handing the unitOil Fill Plug/Dipstick 2 O-Ring Top of Dipstick Changing the OILMA10 MA11 MA12 MA13 Change the oil as follow Valve to Rocker ARM ClearanceRocker arm cover MA14 MA15 Feeler gauge 2 Rocker arm Adjusting nut 4 GasketFuel Filter Fuel filterSpark Plug MA16Specified plug is Champion RDZ19H Tightening Torque MufflerSpark Arrester MA17 MA18Spark arrester Gear Case MA18Cylinder Intake air cooling vent back MA19 MA20Cleaning and storage CleaningStorage Optional blade usage OPT4 OPT5 OPT6 Bracket HandleCutting Method OPT7 OPT8 Operation Controlling Blade BounceWhat causes kick out How you can maintain the best control How you can reduce the chance of kick outTransporting the Unit OPT9 Maintenance BladeProblem Cause Action Troubleshooting guideParts list 36  37  38  39  Manufacturer’s warranty coverage RedMax TRIMMER/BRUSHCUTTER Model BCX2600S Year Limited WarrantyLimites de la garantie