Zenoah BCX2600S manual MA19 MA20, Cylinder Intake air cooling vent back

Page 27

9. Maintenance

MA19

(2)

(1)

MA20

order to be able to view the upper part of the cylinder.

IMPORTANT

•If waste gets stuck and causes blockage around the intake air cooling vent or between the cylinder fins, it may cause the engine to overheat, and that in turn may cause mechanical failure on the part of the brushcutter. (MA19)

(1)cylinder

(2)intake air cooling vent (back)

■MUFFLER AND THE OTHER MAINTENANCE AFTER EVERY 100 HOURS OF USE

1.Remove the muffler, insert a screwdriver into the vent, and wipe away any carbon buildup. Wipe away any carbon buildup on the muffler exhaust vent and cylinder exhaust port at the same time. (MA20)

Ask the authorized servicing dealer for the combustion chamber’s maintenance.

2.Tighten all screws, bolts, and fittings.

3.Check to see if any oil or grease has worked its way in between the clutch lining and drum, and if it has wipe it away using oil-free, lead-free gasoline.

27 

Image 27

Contents T3032-93110 BCX2600SPage Safety First Parts location Avertissement Symbols on the machine EmplacementPosition For safe operation Working ConditionWorking Circumstance Working Plan Starting the Engine Before Starting the EngineUsing the Product Maintenance If Someone ComesHandling Fuel Transportation Set up Balance Unit SE5 SE6 Installing Cutting Head SE5Section Oil / FuelRecommended OIL Type Adding OIL to CRANKCASE-INITIAL USEDefinition of Blended Fuels USE of Blended FuelsUSE of Fuel Additives OP1 OP2 OP3 Starting Engine OperationOP5 Adjusting Idling Speed OP4Adjusting the Wire Play OP5 OP4Adjusting the Line Length OP6 Cutting Work Line Head UsageTrimming Grass and Weeds MA1 MA2 MA3 MA4 MaintenanceMaintenance Chart For safety reasons, do not use metalreinforced lineAIR Filter MA5 MA6 MA7Changing the OIL Wear gloves to prevent injury when handing the unitMA8 MA9 OIL Level Oil Fill Plug/Dipstick 2 O-Ring Top of DipstickMA10 MA11 MA12 MA13 Change the oil as follow Valve to Rocker ARM ClearanceRocker arm cover Fuel filter Feeler gauge 2 Rocker arm Adjusting nut 4 GasketMA14 MA15 Fuel FilterTightening Torque Muffler MA16Spark Plug Specified plug is Champion RDZ19HGear Case MA18 MA17 MA18Spark Arrester Spark arresterCylinder Intake air cooling vent back MA19 MA20Cleaning and storage CleaningStorage Optional blade usage OPT4 OPT5 OPT6 Bracket HandleCutting Method OPT7 OPT8 Operation Controlling Blade BounceWhat causes kick out How you can maintain the best control How you can reduce the chance of kick outTransporting the Unit OPT9 Maintenance BladeProblem Cause Action Troubleshooting guideParts list 36  37  38  39  Manufacturer’s warranty coverage RedMax TRIMMER/BRUSHCUTTER Model BCX2600S Year Limited WarrantyLimites de la garantie