Zenoah BCX2600S manual Transportation

Page 12

5. For safe operation

tank of the unit in any place where there is a boiler, stove, wood fire, electrical sparks, welding sparks, or any other source of heat or fire which might ignite the fuel.

2.Never smoke while operating the unit or refilling its fuel tank.

3.When refilling the tank, always turn off the engine and allow it to cool down. Take a careful look around to make sure that there are no sparks or open flames anywhere nearby before refueling.

4.Wipe spilled fuel completely using a dry rag if any fuel spillage occurs during refueling.

5.After refueling, screw the fuel cap back tightly onto the fuel tank and then carry the unit to a spot 10 feet or more away from where it was refueled before turning on the engine.

TRANSPORTATION

1.When hand-carrying the product, cover over the cutting part if necessary, lift up the unit and carry it paying attention to the cutting part.

2.Never transport the product over rough roads over long distances by vehicle without removing all fuel from the fuel tank. If doing so, fuel might leak from the tank during transport.

12

Image 12
Contents BCX2600S T3032-93110Page Safety First Parts location Avertissement Symbols on the machine EmplacementPosition For safe operation Working ConditionWorking Circumstance Working Plan Before Starting the Engine Starting the EngineUsing the Product Maintenance If Someone ComesHandling Fuel Transportation Set up SE5 SE6 Installing Cutting Head SE5 Balance UnitOil / Fuel Recommended OIL TypeAdding OIL to CRANKCASE-INITIAL USE SectionDefinition of Blended Fuels USE of Blended FuelsUSE of Fuel Additives Operation OP1 OP2 OP3 Starting EngineAdjusting Idling Speed OP4 Adjusting the Wire Play OP5OP4 OP5Adjusting the Line Length OP6 Cutting Work Line Head UsageTrimming Grass and Weeds Maintenance Maintenance ChartFor safety reasons, do not use metalreinforced line MA1 MA2 MA3 MA4MA5 MA6 MA7 AIR FilterWear gloves to prevent injury when handing the unit MA8 MA9 OIL LevelOil Fill Plug/Dipstick 2 O-Ring Top of Dipstick Changing the OILMA10 MA11 MA12 MA13 Change the oil as follow Valve to Rocker ARM ClearanceRocker arm cover Feeler gauge 2 Rocker arm Adjusting nut 4 Gasket MA14 MA15Fuel Filter Fuel filterMA16 Spark PlugSpecified plug is Champion RDZ19H Tightening Torque MufflerMA17 MA18 Spark ArresterSpark arrester Gear Case MA18MA19 MA20 Cylinder Intake air cooling vent backCleaning and storage CleaningStorage Optional blade usage OPT4 OPT5 OPT6 Bracket HandleCutting Method OPT7 OPT8 Operation Controlling Blade BounceWhat causes kick out How you can reduce the chance of kick out How you can maintain the best controlOPT9 Maintenance Blade Transporting the UnitTroubleshooting guide Problem Cause ActionParts list 36  37  38  39  Manufacturer’s warranty coverage Model BCX2600S Year Limited Warranty RedMax TRIMMER/BRUSHCUTTERLimites de la garantie