Buhler 65 Series warranty Driveline Dimension

Page 13

65 Series Rotary Tiller

DRIVELINE DIMENSION

A PTO driveline is supplied with the machine. To accommodate the variety of 3 point hitch geometry available today, the driveline can be too long for some machines and must be cut. It is very important that the driveline be free to telescope but not bottom out when going through its working range. If the driveline bottoms out, the bearings on both the machine and tractor PTO shaft will be overloaded and fail in a short time.

When cutting the driveline, follow this procedure:

1.Clear the area of bystanders, especially small children.

2.Attach the Tiller to the tractor but do not attach the driveline.

3.Raise the machine until the input shaft is level with the tractor PTO shaft.

4.Measure the dimension between the locking groove on the tractor PTO shaft and the groove on the Tiller input shaft.

5.Measure the same dimensions on the compressed driveline.

6.If the driveline dimension exceeds the machine dimension, the driveline will have to be cut.

13

Image 13

Contents Warranty Labor Warranty ClaimsImportant Facts Table of Contents Description Parts Lists and Drawings Table of Contents cont’dIntroduction Think SAFETY! Work Safely SafetyOperating Safety General SafetyTransport Safety Maintenance SafetyStorage Safety Safety SignsSafety Sign Locations How to Apply Safety SignsWork Safely Safety Sign Locations contd Machine Components Operation To the NEW Operator or OwnerMachine BREAK-IN PRE-OPERATION ChecklistEquipment Matching Driveline Dimension Driveline Dimension cont’d ATTACHING/UNHOOKING ATTACHING/UNHOOKING cont’d Field Operation Field Operation contd Field Operation contd Transporting Speed vs. weight RatioStorage Fluids and Lubricants Service and MaintenanceGreasing Hours or once a season Servicing IntervalsAnnually Servicing Intervals cont’d HoursFrame Adjustment MaintenanceTine Replacement Slip Clutch Clutch Maintenance Repair Main Shaft Replacement Problem Cause Solution Trouble ShootingAssembly Bolt Torque Checking Bolt Torque English Torque Specifications50, 60 & 72 65 Series Tillers 50, 60 & 72 65 Series Tillers 82 65 Series Tiller only 50, 60, 72, & 82 65 Series Tillers Description Parts List When Ordering PartsSeries Rotary Tiller Page 50 60, 72 Series Tiller PTO Slip ClutchSeries Tiller PTO Parts List Slip Clutch 50, 60 Description Series Tiller PTO Parts List Slip Clutch 82 only Description Series Rotary Tiller Description Quantity 82 65 Series Tiller Gearbox Parts ListRequired Shipping Bundles