Buhler 65 Series warranty Maintenance, Frame Adjustment, Tine Replacement

Page 25

65 Series Rotary Tiller

MAINTENANCE

By following a careful service and maintenance program for your machine, you will enjoy many years of trouble-free operation.

A-FRAME ADJUSTMENT

When moving the hitch along the front frame to adjust the offset, follow this procedure:

1.Clear the area of bystanders, especially small children.

2.Raise the machine so it is slightly out of the ground.

3.Loosen the U-bolts through the Category Pin brackets.

4.Slide the hitch along the Deck until the machine is set at the desired offset.

5.Tighten the U-bolts to their specified torque.

TINE REPLACEMENT

When the Tines are damaged in any way, they will need to be replaced. When replacing, follow this procedure:

1.Clear the area of bystanders, especially small children.

2.Raise the machine until the Tines are slightly above the ground.

3.Stop engine, set park brake, remove ignition key and wait for all moving parts to stop before dismounting.

4.Place blocks under each Depth Gauge Shoe to support the machine.

5.Raise the Drag Shield and secure in the up position.

6.Wear leather or heavy canvas gloves when handling Tines.

7.Remove mounting bolts from Tines.

ALERT: An alternate method would be to disconnect the machine from the tractor and tip it forward on its nose.

8.Install a new replacement blade and tighten the mounting bolts to their specified torque.

9.Lower the rear gate.

10.Remove the blocks under the skid plates.

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Warranty Labor Warranty ClaimsImportant Facts Table of Contents Description Parts Lists and Drawings Table of Contents cont’dIntroduction Think SAFETY! Work Safely SafetyOperating Safety General SafetyTransport Safety Maintenance SafetyStorage Safety Safety SignsSafety Sign Locations How to Apply Safety SignsWork Safely Safety Sign Locations contd Machine Components Operation To the NEW Operator or OwnerMachine BREAK-IN PRE-OPERATION ChecklistEquipment Matching Driveline Dimension Driveline Dimension cont’d ATTACHING/UNHOOKING ATTACHING/UNHOOKING cont’d Field Operation Field Operation contd Field Operation contd Transporting Speed vs. weight RatioStorage Fluids and Lubricants Service and MaintenanceGreasing Hours or once a season Servicing IntervalsAnnually Servicing Intervals cont’d HoursFrame Adjustment MaintenanceTine Replacement Slip Clutch Clutch Maintenance Repair Main Shaft Replacement Problem Cause Solution Trouble ShootingAssembly Bolt Torque Checking Bolt Torque English Torque Specifications50, 60 & 72 65 Series Tillers 50, 60 & 72 65 Series Tillers 82 65 Series Tiller only 50, 60, 72, & 82 65 Series Tillers Description Parts List When Ordering PartsSeries Rotary Tiller Page 50 60, 72 Series Tiller PTO Slip ClutchSeries Tiller PTO Parts List Slip Clutch 50, 60 Description Series Tiller PTO Parts List Slip Clutch 82 only Description Series Rotary Tiller Description Quantity 82 65 Series Tiller Gearbox Parts ListRequired Shipping Bundles
Top Page Image Contents