Buhler 65 Series warranty Maintenance Safety, Transport Safety, Storage Safety, Safety Signs

Page 7

65 Series Rotary Tiller

MAINTENANCE SAFETY

1.Follow ALL the operating, maintenance and safety information in the manual.

2.Support the machine with blocks or safety stands when working beneath it.

3.Follow good shop practices

-Keep service area clean and dry.

-Be sure electrical outlets and tools are properly grounded.

-Use adequate light for the job at hand.

4.Use only tools, jacks and hoists of sufficient capacity for the job.

5.Never work on rotor blades or under the machine unless the tractor engine is off and driveline is disconnected.

6.Make sure all guards are in place and properly secured when maintenance work is completed.

7.Never wear ill-fitting, baggy or frayed clothing when working around or on any of the drive system components.

8.Keep hands, feet, hair and clothing away from moving or rotating parts.

9.Clear the area of bystanders, especially small children, when carrying out any maintenance and repairs or making any adjustments.

TRANSPORT SAFETY

1.Review Transport Safety instructions in tractor manual before moving.

2.Always travel at a safe speed.

3.Always use hazard warning flashers on tractor when transporting unless prohibited by law.

4.Do not exceed 20 mph (32 kph) during transport.

STORAGE SAFETY

1.Store the unit in an area away from human activity.

2.Do not permit children to play on or around the stored machine.

3.Support frame on stands and blocks to provide a secure base.

SAFETY SIGNS

1.Keep Safety Signs clean and legible at all times.

2.Replace Safety Signs that are missing or have become illegible.

3.Replaced parts that displayed a safety sign should also display the current sign.

4.Safety Signs are available from your Dealer Parts Department or the factory.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Warranty Labor Warranty ClaimsImportant Facts Table of Contents Description Parts Lists and Drawings Table of Contents cont’dIntroduction Think SAFETY! Work Safely SafetyOperating Safety General SafetySafety Signs Maintenance SafetyTransport Safety Storage SafetySafety Sign Locations How to Apply Safety SignsWork Safely Safety Sign Locations contd Machine Components Operation To the NEW Operator or OwnerMachine BREAK-IN PRE-OPERATION ChecklistEquipment Matching Driveline Dimension Driveline Dimension cont’d ATTACHING/UNHOOKING ATTACHING/UNHOOKING cont’d Field Operation Field Operation contd Field Operation contd Transporting Speed vs. weight RatioStorage Fluids and Lubricants Service and MaintenanceGreasing Hours or once a season Servicing IntervalsAnnually Servicing Intervals cont’d HoursFrame Adjustment MaintenanceTine Replacement Slip Clutch Clutch Maintenance Repair Main Shaft Replacement Problem Cause Solution Trouble ShootingAssembly Bolt Torque Checking Bolt Torque English Torque Specifications50, 60 & 72 65 Series Tillers 50, 60 & 72 65 Series Tillers 82 65 Series Tiller only 50, 60, 72, & 82 65 Series Tillers Description Parts List When Ordering PartsSeries Rotary Tiller Page 50 60, 72 Series Tiller PTO Slip ClutchSeries Tiller PTO Parts List Slip Clutch 50, 60 Description Series Tiller PTO Parts List Slip Clutch 82 only Description Series Rotary Tiller Description Quantity 82 65 Series Tiller Gearbox Parts ListRequired Shipping Bundles
Top Page Image Contents