Buhler 65 Series warranty Slip Clutch

Page 26

65 Series Rotary Tiller

SLIP CLUTCH

During normal operation, the slip clutch can release and slip when encountering an obstruction or when overloaded. It is designed to slip when the load exceeds 3 times its nominal rating. When the clutch slips too frequently during normal operating conditions, it is necessary to replace the clutch linings. NOTE: The PTO shafts are shipped with the slip clutch disengaged. There are four socket set screws on the inside of the clutch assembly, which are turned out as far as they go to engage the clutch. Disengage clutch by turning set screws in fully.

To replace clutch linings, follow this procedure:

1.Disengage the clutch by turning the four set screws all the way in.

2.Remove the outside bolts from the clutch assembly and replace the clutch linings.

3.When re-tightening the bolts, stop when the clutch spacer starts to touch the clutch plates. You should be able to just move the spacer by hand when you have the correct bolt torque.

4.Engage clutch by turning out set screws after assembly is complete.

26

Image 26

Contents Important Facts Warranty ClaimsWarranty Labor Table of Contents Description Table of Contents cont’d Parts Lists and DrawingsIntroduction Safety Think SAFETY! Work SafelyGeneral Safety Operating SafetyStorage Safety Maintenance SafetyTransport Safety Safety SignsWork Safely How to Apply Safety SignsSafety Sign Locations Safety Sign Locations contd Operation To the NEW Operator or Owner Machine ComponentsPRE-OPERATION Checklist Machine BREAK-INEquipment Matching Driveline Dimension Driveline Dimension cont’d ATTACHING/UNHOOKING ATTACHING/UNHOOKING cont’d Field Operation Field Operation contd Field Operation contd Speed vs. weight Ratio TransportingStorage Greasing Service and MaintenanceFluids and Lubricants Servicing Intervals Hours or once a seasonServicing Intervals cont’d Hours AnnuallyTine Replacement MaintenanceFrame Adjustment Slip Clutch Clutch Maintenance Repair Main Shaft Replacement Trouble Shooting Problem Cause SolutionAssembly English Torque Specifications Bolt Torque Checking Bolt Torque50, 60 & 72 65 Series Tillers 50, 60 & 72 65 Series Tillers 82 65 Series Tiller only Parts List When Ordering Parts 50, 60, 72, & 82 65 Series Tillers DescriptionSeries Rotary Tiller Page Series Tiller PTO Slip Clutch 50 60, 72Series Tiller PTO Parts List Slip Clutch 50, 60 Description Series Tiller PTO Parts List Slip Clutch 82 only Description Series Rotary Tiller 82 65 Series Tiller Gearbox Parts List Description QuantityShipping Bundles Required