Buhler 65 Series warranty Machine BREAK-IN, PRE-OPERATION Checklist

Page 11

65 Series Rotary Tiller

MACHINE BREAK-IN

Although there are no operational restrictions on the Tiller when used for the first time, it is recommended that the following mechanical items be checked:

A.After operating for 1/2 hour or after completing 1/2 acre:

1.Check all nuts, bolts and other fasteners. Tighten to their specified torque level.

2.Check that the blades are in good condition and bolted securely to the rotor.

3.Check the oil level in the gearbox. Add as required.

4.Check that the PTO driveline shield turns freely.

5.Lubricate all grease points.

B.After operating for 5 hours and 10 hours:

1.Repeat items 1 through 5 of Section A.

2.Then go to the regular service schedule as defined in Section 5.

PRE-OPERATION CHECKLIST

Efficient and safe operation of the Rotary Tiller requires that each operator reads and understands the operating procedures and all related safety precautions outlined in this section. A pre-operation checklist is provided for the operator. It is important for both personal safety and maintaining the good mechanical condition of the Tiller that this checklist is followed.

Before operating the machine and each time thereafter, the following areas should be checked off:

Lubricate the machine per the schedule outlined in the Service and Maintenance Section.

Use only a tractor of adequate power and weight to pull the machine.

Check that the machine is properly attached to the tractor. Be sure retainers are used on the mounting pins.

Check the oil level in the gearbox. Add as required.

Check that the PTO driveline shield turns freely and that the driveline can telescope easily. Clean and lubricate if required.

Check the blades. Be sure they are not damaged or broken and are bolted securely to the rotor. Repair or replace as required.

Remove any entangled material on rotating parts.

Install and secure all guards, doors and covers before starting.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Important Facts Warranty ClaimsWarranty Labor Table of Contents Description Parts Lists and Drawings Table of Contents cont’dIntroduction Think SAFETY! Work Safely SafetyOperating Safety General SafetySafety Signs Maintenance SafetyTransport Safety Storage SafetyWork Safely How to Apply Safety SignsSafety Sign Locations Safety Sign Locations contd Machine Components Operation To the NEW Operator or OwnerMachine BREAK-IN PRE-OPERATION ChecklistEquipment Matching Driveline Dimension Driveline Dimension cont’d ATTACHING/UNHOOKING ATTACHING/UNHOOKING cont’d Field Operation Field Operation contd Field Operation contd Transporting Speed vs. weight RatioStorage Greasing Service and MaintenanceFluids and Lubricants Hours or once a season Servicing IntervalsAnnually Servicing Intervals cont’d HoursTine Replacement MaintenanceFrame Adjustment Slip Clutch Clutch Maintenance Repair Main Shaft Replacement Problem Cause Solution Trouble ShootingAssembly Bolt Torque Checking Bolt Torque English Torque Specifications50, 60 & 72 65 Series Tillers 50, 60 & 72 65 Series Tillers 82 65 Series Tiller only 50, 60, 72, & 82 65 Series Tillers Description Parts List When Ordering PartsSeries Rotary Tiller Page 50 60, 72 Series Tiller PTO Slip ClutchSeries Tiller PTO Parts List Slip Clutch 50, 60 Description Series Tiller PTO Parts List Slip Clutch 82 only Description Series Rotary Tiller Description Quantity 82 65 Series Tiller Gearbox Parts ListRequired Shipping Bundles
Top Page Image Contents