Buhler 65 Series warranty Transporting, Speed vs. weight Ratio

Page 20

65 Series Rotary Tiller

TRANSPORTING

When transporting the machine, review and follow these instructions:

1.Be sure all bystanders are clear of the machine.

2.Be sure that the machine is securely attached to the tractor and all retainer pins are installed.

3.Clean the SMV emblem, lights and reflectors and be sure they are working.

4.Be sure you are in compliance with all applicable lighting and marking regulations when transporting. Check with your local authorities.

5.Be sure your machine can clearly be seen by overtaking and oncoming traffic.

6.Keep to the right and yield the right-of-way to allow faster traffic to pass. Drive on the road shoulder if permitted by law.

7.Do not allow riders.

8.Always use hazard flashers on the tractor when transporting unless prohibited by law.

9.Use pilot vehicles front and rear when transporting during times of limited visibility.

10.Never transport the machine faster than 20 mph (32 km/h). The ratio of the tractor weight to the Tiller weight plays an important role in defining acceptable travel speed. Table 2 summarizes the recommended travel speed to weight

ratio.

Table 2 Speed vs. weight Ratio

 

Weight of fully equipped

 

or loaded implement(s)

 

relative to weight of

Road Speed

towing machine

Up to 32 km/h

1 to 1, or less

(20 mph)

 

Up to 16 km/h

2 to 1, or less

(10 mph)

 

Do not tow

More than 2 to 1

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Important Facts Warranty ClaimsWarranty Labor Table of Contents Description Table of Contents cont’d Parts Lists and DrawingsIntroduction Safety Think SAFETY! Work SafelyGeneral Safety Operating SafetyMaintenance Safety Transport SafetyStorage Safety Safety SignsWork Safely How to Apply Safety SignsSafety Sign Locations Safety Sign Locations contd Operation To the NEW Operator or Owner Machine ComponentsPRE-OPERATION Checklist Machine BREAK-INEquipment Matching Driveline Dimension Driveline Dimension cont’d ATTACHING/UNHOOKING ATTACHING/UNHOOKING cont’d Field Operation Field Operation contd Field Operation contd Speed vs. weight Ratio TransportingStorage Greasing Service and MaintenanceFluids and Lubricants Servicing Intervals Hours or once a seasonServicing Intervals cont’d Hours AnnuallyTine Replacement MaintenanceFrame Adjustment Slip Clutch Clutch Maintenance Repair Main Shaft Replacement Trouble Shooting Problem Cause SolutionAssembly English Torque Specifications Bolt Torque Checking Bolt Torque50, 60 & 72 65 Series Tillers 50, 60 & 72 65 Series Tillers 82 65 Series Tiller only Parts List When Ordering Parts 50, 60, 72, & 82 65 Series Tillers DescriptionSeries Rotary Tiller Page Series Tiller PTO Slip Clutch 50 60, 72Series Tiller PTO Parts List Slip Clutch 50, 60 Description Series Tiller PTO Parts List Slip Clutch 82 only Description Series Rotary Tiller 82 65 Series Tiller Gearbox Parts List Description QuantityShipping Bundles Required
Top Page Image Contents