Bolens 645A, 643B, 643C warranty Warranty

Page 23

TROY-BILT TILLER LIFETIME LIMITED WARRANTY

WHAT PRODUCT

All Troy-Bilt branded rear tine walk-behind tillers with gear drive transmissions.This

IS COVERED

warranty begins on the date of purchase and is warranted by Troy-Bilt LLC for the

 

life of the tiller, to the original purchaser only.

 

 

WHAT IS COVERED

Troy-Bilt LLC will, at its option, repair or replace any part found to be defective in

BY THIS WARRANTY

material or workmanship without charge for parts and labor.

 

This limited lifetime warranty also applies to non-powered attachments and acces-

 

sories. Powered attachments and accessories are warranted separately by their

 

manufacturers. Refer to the applicable manufacturer’s warranty on these items for

 

terms and conditions.

 

 

WHAT IS NOT

This warranty does not apply to parts that have been damaged by accident, altera-

COVERED BY THIS

tion, misuse, abuse, neglect, improper maintenance, vandalism, theft, fire, water,

WARRANTY

or damage because of peril or other natural disaster.

 

The following items are not covered after the first year of this residential use limited

 

warranty: belts, batteries, bushings, seals, tines, tires, wheels, paint, appearance

 

items, and similar items that are normally replaced through periodic maintenance.

 

Charges for pick-up, delivery, and service calls are not covered by this warranty.

 

Service completed by someone other than an authorized service dealer is not

 

covered by this warranty.

 

Parts that are not genuine Troy-Bilt LLC service parts are not covered by this

 

warranty.

 

The engine is warranted separately by the engine manufacturer. Refer to the

 

engine manufacturer’s warranty for terms and conditions.

 

 

LIMITED

If used for commercial, institutional, industrial, rental, or demonstrator purposes,

COMMERCIAL

the warranty on the tiller is limited in duration to 90 days from the date of purchase.

USE WARRANTY

This warranty does not apply to parts that have been damaged by accident, altera-

 

tion, misuse, abuse, neglect, improper maintenance, vandalism, theft, fire, water,

 

or damage because of peril or other natural disaster.

 

 

HOW TO OBTAIN

Warranty service is available, with proof of purchase, through your local authorized

SERVICE

service dealer. To locate a dealer in your area, consult 1-800-668-1238 or log

 

onto our website at www.troybilt.ca

 

 

The provisions set forth in this warranty provide the sole and exclusive remedy arising from the sale. Troy-Bilt LLC shall not be liable for any incidental or consequential damage or expense of any kind, including but not limited to cost of equipment rental, loss of profits, or costs of hiring services to perform tasks normally performed by the equipment.

Any implied warranties, including any implied warranty of merchantability or fitness for a particular purpose, shall be limited in duration to the period of ownership by the original purchaser (and a maximum of 90 days from the date of sale if the tiller is purchased for commercial or other non-residential use).

Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above exclusions or limitations may not apply to you.

This limited warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

For customer assistance, contact your nearest authorized dealer, or contact us at:

P. O. Box 1386, 97 Kent Avenue, Kitchener, Ontario Canada N2G 4J1

7

Warranty

Failure to comply with suggested maintenance and lubrication specifications will void warranty.

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents 02/24/2006 772C0845Table of Contents Heed ITS Warning TrainingPreparation OperationNever pick up or carry machine while the engine is running Maintenance & StorageIntroduction AssemblyAssembly Steps Loose Parts ListWheel shaft L Outside of the handle- bar assemblyImportant The support brackets must be assembled to Move Tiller OFF CrateThread the #10-24 hex nut Z, Fig Install Forward Clutch CableThread the screw V into the cable adjuster Check all nuts and screws for tightness Check Transmission OIL LevelADD Motor OIL Check HardwareEngine Controls Features ControlsWheel Drive Pins IntroductionReverse Clutch Control Models 643B & 645A only Forward Clutch BailTo operate the Forward Clutch Bail Depth Regulator LeverTo adjust the handlebars Handlebar Height AdjustmentStarting and Stopping Pre-Start ChecklistFeatures and Controls Introduction BREAK-IN OperationReduces traction Release all controls on the tillerStopping the Engine and Tiller Operating the TillerStopping the Tiller and Engine FreewheelAvoid Tilling Soggy, Wet Soil Read the following recommendations before tilling on slopesTilling Up and Down Slopes Vertical Tilling Loading and Unloading the Tiller Terrace GardeningCheck Hardware Maintenance Schedule ProcedureTiller Lubrication Check for OIL LeaksBolo Tines Transmission Gear OIL ServiceYou have good footing. Never permit tiller Removing/Installing a Tine AssemblyTo Check Reverse Belt Tension Replacement Belt InformationOnly Drive Belt Tension Models 643B & 645ATo Check the Engine Oil Level Engine Cleaning AIR Cleaner Service Engine OIL ServiceSpark Plug Service OFF-SEASON StorageTrouble Shooting Warranty Page La page 2 pour ce qui concerne les pièces et/ou accessoires Parts List Pièces DétachéesAdressez-vous au «Service après-vente» Use as required to obtain between Part Description RÉF Pièce Page Part Description RÉF Pièce For parts and/or accessories refer to customer support on Page Juridictions les selon GarantieDépannage Moteur à l’huile changer Pour .B Bougie LA DE EntretienTeur -CARBURATEUR/RÉGULA DU Réglages Lles -ÉTINCE-PARE L’ÉCRAN DE EntretienIntérieur blocage de l’écrou serrez et tourner de Moteur À L’HUILE DE VidangeAIR À Filtre DU Entretien Moteur DU NettoyageAvant Marche LA Seulement 645A et 643B Modèles ArrièreMarche LA DE Courroie LA DE Sion TEN LA DE Réglage ET VérificationArbre AvantBolo Dents DentsTrans LA DE Engrenages Pour Huile Pas ne pour niveau le fréquemment VérifiezFond MissionEntretien Motoculteur DU Déchargement ET Chargement UtilisationRisques des présenter Dents des NettoyageCorporelles blessures Sauf déconseillonsTerre une travailler de Évitez DétrempéeTerre la pulvériser Profondeur en plus dents les travailler Corporelles Blessures des et matériels dégâts desLes laissez et travaillant en détendu Soyez .b Motoculteur, du contrôle de perte laTravail Terre laSéparément fournie moteur du Réglage ChineFaites Ne Travailler à prêt soyez vous que ce jusqu’à Matériels dégâtsDes ou corporelles blessures des entraîner Peut avertissement cet de respect non LeCette Avant Marche LA DE D’EMBRAYAGE BarreRoues DES D’ENTRAÎNEMENT Goupilles Moteur DU Commandes’HUILE Plein Étape Septième AssemblageMoteur ’EMBRAYAGE Câble DU Tion Installa Étape QuatrièmeIncorrecte tension Remarque Avant Marche LA DEMoto LE Sortir Étape Troisième Caisse LA DE CulteurRemarque Détachées pièces des ListeRespectez SYMBOLE! CE Accompagne QUI L’AVERTISSEMENTResponsabilité Votre Remisage et EntretienGénéral en Utilisation SYMBOLE! CE Accompagne QUI L’AVERTISSEMENT RespectezFonctionnement PréparationSaison hors Remisage et Entretien Commandes et CaractéristiquesDépannage 02/24/2006 772C0845 ’UTILISATION Notice

643B, 643C, 645A specifications

The Bolens 645A, 643C, and 643B are celebrated models in the lineup of Bolens garden tractors, known for their durability and versatility. These machines, produced during the 1970s and 1980s, are vintage favorites for homeowners and garden enthusiasts seeking rugged equipment for their gardening needs.

The Bolens 645A is especially noted for its robust build and powerful performance. Equipped with a 7-horsepower engine, the 645A can tackle a variety of tasks, from mowing to snow removal, making it a multipurpose tool in any garden or landscape. One of the main features of the 645A is its hydrostatic transmission, which allows for seamless speed adjustments, providing exceptional maneuverability in tight spaces and varied terrain.

Similarly, the Bolens 643C and 643B models boast impressive features and capabilities. The 643C is renowned for its compact yet powerful 6-horsepower engine. It includes a gear-driven transmission, which offers reliable power transfer and increased efficiency while operating under demanding conditions. The steady performance of the 643C makes it ideal for smaller properties, where precision and control are paramount.

The 643B, while slightly less powerful than its sibling, still holds its own with a solid 5-horsepower engine. It is particularly favored for its ease of use and relatively low maintenance requirements, making it a perfect choice for casual gardeners or those new to the world of garden tractors. Its straightforward controls and simple mechanisms ensure that users can quickly learn to operate it proficiently.

All three models are engineered with a focus on user comfort. The seating is designed ergonomically, allowing users to operate for extended periods without discomfort. Additionally, the accessibility for maintenance tasks is a notable characteristic, ensuring that both professional and amateur gardeners can perform regular upkeep with ease.

In terms of technology, these models utilize straightforward mechanical designs with minimal electronic components, which reduces the likelihood of breakdowns and simplifies repairs. The rugged construction of the chassis and attachments demonstrates Bolens' commitment to longevity and resilience, making these tractors a solid investment for any gardening enthusiast.

In summary, the Bolens 645A, 643C, and 643B models stand out in the garden tractor market due to their powerful engines, user-friendly designs, and robust construction. They represent a blend of efficiency and reliability, catering to a wide range of gardening tasks and maintaining a loyal following among vintage equipment enthusiasts.
Top Page Image Contents