Genie Operators Manual for Troubleshooting and Controls of TMZ Models

Page 12

Operator's Manual	First Edition • Third Printing

CONTROLS

Ground Control Panel

1Red Emergency Stop button

2Primary boom retract button

3Primary boom extend button

4Jib boom up button

5Jib boom down button

6Platform level up button

7Platform level down button

8Engine power indicator light

9Battery power indicator light

10Battery charge level indicator lights

11 Key switch for ground/off/ platform selection

12 Outrigger status indicator lights

13 Outrigger button

14 Retract outrigger(s) enable button

15 Automatic leveling button

16 Extend outrigger(s) enable button

17 Function enable/speed select buttons

18 Turntable rotate right button

19 Engine start button

20 Horn button

21 Turntable rotate left button

22 Secondry boom down button

23 Secondary boom up button

24 Primary boom down button

25 Primary boom up button

Gasoline models with LED diagnostic readout: Choke function is activated by pushing engine start button and slow function speed select button

10

Genie TMZ-50/30 & Genie TMZ-17/10

Part No. 72896

Image 12

Contents Operator’s Manual Contents Contact usSafety Rules Do Not Operate UnlessElectrocution Hazards Tip-over HazardsBodily Injury Hazard Collision Hazards Component Damage HazardsLifting Hazards Explosion and Fire HazardsDamaged Machine Hazards Towing HazardsPersonnel Lifting Configuration Tip-over Hazards Material Lifting Configuration Collision HazardsFall Hazards Collision HazardOptional Drive System Tip over Hazards Decal LegendBattery Safety Burn Hazards Explosion HazardsTip-over Hazard Lifting HazardControls Platform Control PanelGround Control Panel Drive Control Panel option Pre-operation Inspection FundamentalsPre-operation Inspection PRE-OPERATION InspectionMaintenance Maintenance Symbols LegendCheck the Hydraulic Oil Level Observe and Obey Check the Engine Oil Level Engine ModelsScheduled Maintenance Check the Tires and WheelsSetup Function TestsFunction Tests At the Ground Controls Test Emergency StopTest Outrigger Interlock Test the Boom FunctionsAt the Platform Controls Test the HornTest Machine Functions Test the Drive and Steering If equippedWorkplace Inspection Workplace InspectionSet up Operating InstructionsEmergency Stop Only use the machine as it was intendedTransport Towing InformationModels with Engines Manual Lowering DC Models Manual LoweringPrimary boom retract function All other functionsOperation from Ground Operation from PlatformTo Position Platform Optional Drive System Operating Instructions Backing Up with Trailer If equipped with surge brakeTransport Not attached to a tow vehicle After Each UseMaterial Lifting Configuration Observe and Obey Material Lifting Configuration Set upBattery and Charger Instructions Observe and Obey Dry Battery Filling Charging InstructionsTo Charge Battery Voltage ConversionDecals Decal InspectionDecals Specifications Reporting Safety Defects Reporting Safety DefectsGenie Industries PO Box Redmond, WA Distributed By