Genie TMZ-17, TMZ-10 manual Reporting Safety Defects, Genie Industries PO Box Redmond, WA

Page 33

First Edition • Third Printing

Operator's Manual

 

 

 

 

Reporting Safety Defects

Genie Industries

PO Box 97030

Redmond, WA 98073-9730

Reporting Safety Defects

If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to Genie Industries.

If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in any individual problems between you, your dealer or Genie Industries.

To contact NHTSA you may either call the Auto Safety Hotline toll-free at 1-800-424-9393 (366-

0123 in Washington DC area) or write to:

NHTSA

U.S. Department of Transportation 400 7th Street SW, (NSA-11) Washington DC 20590

You can also obtain information about motor vehicle safety from the Hotline.

Part No. 72896

Genie TMZ-50/30 & Genie TMZ-17/10

31

Image 33
Contents Operator’s Manual Contact us ContentsDo Not Operate Unless Safety RulesTip-over Hazards Electrocution HazardsBodily Injury Hazard Component Damage Hazards Collision HazardsLifting Hazards Explosion and Fire HazardsTowing Hazards Damaged Machine HazardsMaterial Lifting Configuration Collision Hazards Personnel Lifting Configuration Tip-over HazardsFall Hazards Collision HazardDecal Legend Optional Drive System Tip over HazardsExplosion Hazards Battery Safety Burn HazardsTip-over Hazard Lifting HazardPlatform Control Panel ControlsGround Control Panel Drive Control Panel option Fundamentals Pre-operation InspectionPRE-OPERATION Inspection Pre-operation InspectionMaintenance Maintenance Symbols LegendCheck the Hydraulic Oil Level Observe and Obey Engine Models Check the Engine Oil LevelCheck the Tires and Wheels Scheduled MaintenanceSetup Function TestsFunction Tests Test Emergency Stop At the Ground ControlsTest Outrigger Interlock Test the Boom FunctionsTest the Horn At the Platform ControlsTest Machine Functions Test the Drive and Steering If equippedWorkplace Inspection Workplace InspectionOperating Instructions Set upEmergency Stop Only use the machine as it was intendedTowing Information TransportDC Models Manual Lowering Models with Engines Manual LoweringPrimary boom retract function All other functionsOperation from Ground Operation from PlatformTo Position Platform Backing Up with Trailer If equipped with surge brake Optional Drive System Operating InstructionsTransport Not attached to a tow vehicle After Each UseMaterial Lifting Configuration Set up Material Lifting Configuration Observe and ObeyDry Battery Filling Charging Instructions Battery and Charger Instructions Observe and ObeyTo Charge Battery Voltage ConversionDecal Inspection DecalsDecals Specifications Reporting Safety Defects Reporting Safety DefectsGenie Industries PO Box Redmond, WA Distributed By