Genie TMZ-50, TMZ-30, TMZ-17, TMZ-10 manual Contents, Contact us

Page 2

Operator's Manual	First Edition • Third Printing

Important

Read, understand and obey these safety rules and operating instructions before operating this machine. Only trained and authorized personnel shall be permitted to operate this machine. This manual should be considered a permanent part of your machine and should remain with the machine at all times. If you have any questions, call Genie Industries.

Contents
	Page
Safety	1
Controls	9
Pre-operation Inspection	12
Maintenance	14
Function Tests	17
Work Place Inspection	20
Operating Instructions	21
Decals	28
Specifications	30
Reporting Safety Defects	31
Contact us:
Internet: http://www.genielift.com
e-mail: techpub@genieind.com

Copyright © 1999 by Genie Industries

First Edition: Third Printing, November 2001

"Genie" and "TMZ" are registered trademarks of Genie Industries in the USA and many other countries.

These machines comply with

ANSI/SIA 92.2-1990.

Printed on recycled paper

Printed in U.S.A.

GenieTMZ-50/30 & GenieTMZ-17/10

Part No.72896

Image 2

Contents Operator’s Manual Contents Contact usSafety Rules Do Not Operate UnlessElectrocution Hazards Tip-over HazardsBodily Injury Hazard Lifting Hazards Collision HazardsComponent Damage Hazards Explosion and Fire HazardsDamaged Machine Hazards Towing HazardsFall Hazards Personnel Lifting Configuration Tip-over HazardsMaterial Lifting Configuration Collision Hazards Collision HazardOptional Drive System Tip over Hazards Decal LegendTip-over Hazard Battery Safety Burn HazardsExplosion Hazards Lifting HazardControls Platform Control PanelGround Control Panel Drive Control Panel option Pre-operation Inspection FundamentalsPre-operation Inspection PRE-OPERATION InspectionCheck the Hydraulic Oil Level Observe and Obey MaintenanceMaintenance Symbols Legend Check the Engine Oil Level Engine ModelsScheduled Maintenance Check the Tires and WheelsFunction Tests SetupFunction Tests Test Outrigger Interlock At the Ground ControlsTest Emergency Stop Test the Boom FunctionsTest Machine Functions At the Platform ControlsTest the Horn Test the Drive and Steering If equippedWorkplace Inspection Workplace InspectionEmergency Stop Set upOperating Instructions Only use the machine as it was intendedTransport Towing InformationPrimary boom retract function Models with Engines Manual LoweringDC Models Manual Lowering All other functionsTo Position Platform Operation from GroundOperation from Platform Transport Not attached to a tow vehicle Optional Drive System Operating InstructionsBacking Up with Trailer If equipped with surge brake After Each UseMaterial Lifting Configuration Observe and Obey Material Lifting Configuration Set upTo Charge Battery Battery and Charger Instructions Observe and ObeyDry Battery Filling Charging Instructions Voltage ConversionDecals Decal InspectionDecals Specifications Genie Industries PO Box Redmond, WA Reporting Safety DefectsReporting Safety Defects Distributed By