Directed Electronics PDG-2515/2520 manual Syst Conf Load Write Save

PDG-2515/2520 Operating Manual

			2	READ,WRITE	SET MODE TO DIVIDE-BY-N MODE
			3	READ,WRITE	SET MODE TO BURST MODE
					SET MODE TO INTERNAL SINGLE
			4	READ,WRITE	SHOT
					SET CHANNEL TO INTERNAL
	TRIG		1	READ,WRITE	TRIGGER
			2	READ,WRITE	SET CHANNEL TO EXTERNAL
					TRIGGER
	STAT		0	READ,WRITE	DISABLE PULSING
			1	READ,WRITE	ENABLE PULSING
	SYNC		x	READ,WRITE	SET SYNC TO CHANNEL x
					LOAD SYSTEM CONFIGURATION x
SYST	CONF	LOAD	x	WRITE
		SAVE	x	WRITE	SAVE CONFIGURATION x
	FIRM	VERS	N/A	READ	GET FIRMWARE VERSION OF UNIT
	HDWR	VERS	N/A	READ	GET HARDWARE VERSION OF UNIT
					SET GPIB ADDRESS x (x = 1-30)
COMM	GPIB	ADDR	x	READ,WRITE
	SERL	BAUD	1	READ,WRITE	SET RS232 BAUD RATE TO 9600
			2		SET RS232 BAUD RATE TO 14400
			3		SET RS232 BAUD RATE TO 19200
			4		SET RS232 BAUD RATE TO 28800
			5		SET RS232 BAUD RATE TO 38400
			6		SET RS232 BAUD RATE TO 57600
			7		SET RS232 BAUD RATE TO 115200
					GET COMMUNICATIONS VERSION OF
	FIRM	VERS	N/A	READ
					CODE

Page 38

MNPDG2515-2520R0.doc

© 2004 Directed Energy, Inc.