Briggs & Stratton 30238 owner manual When Adjusting or Making Repairs to Your Generator

Page 4

SAFETY RULES

WARNING

Rapid retraction of starter cord (kickback) will pull hand and arm toward engine faster than you can let go.

Broken bones, fractures, bruises or sprains could result.

•When starting engine, pull cord slowly until resistance is felt and then pull rapidly to avoid kickback.

•NEVER start or stop engine with electrical devices plugged in and turned on.

WARNING

Unintentional sparking can result in fire or electric shock.

WHEN ADJUSTING OR MAKING REPAIRS TO YOUR GENERATOR

•Disconnect the spark plug wire from the spark plug and place the wire where it cannot contact spark plug.

WHEN TESTING FOR ENGINE SPARK

•Use approved spark plug tester.

•DO NOT check for spark with spark plug removed.

WARNING

Running engines produce heat.Temperature of muffler and nearby areas can reach or exceed 150°F (65°C).

Severe burns can occur on contact.

Combustible debris, such as leaves, grass, brush, etc. can catch fire.

•DO NOT touch hot surfaces.

•Allow equipment to cool before touching.

•The generator must be at least 5 feet (1.5 m) from structures having combustible walls and/or other combustible materials.

•Keep at least 3 feet (1 m) of clearance on all sides of generator for adequate cooling, maintenance and servicing.

•In the State of California a spark arrester is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. If you equip the muffler with a spark arrester, it must be maintained in effective working order.

CAUTION

Excessively high operating speeds increase risk of injury and damage to generator.

Excessively low speeds impose a heavy load.

•DO NOT tamper with governed speed. Generator supplies correct rated frequency and voltage when running at governed speed.

•DO NOT modify generator in any way.

CAUTION

Exceeding generators wattage/amperage capacity can damage generator and/or electrical devices connected to it.

•See “Don’t Overload Generator”.

•Start generator and let engine stabilize before connecting electrical loads.

•Connect electrical loads in OFF position, then turn ON for operation.

•Turn electrical loads OFF and disconnect from generator before stopping generator.

CAUTION

Improper treatment of generator can damage it and shorten its life.

•Use generator only for intended uses.

•If you have questions about intended use, ask dealer or call 1-800-743-4115.

•Operate generator only on level surfaces.

•DO NOT expose generator to excessive moisture, dust, dirt, or corrosive vapors.

•DO NOT insert any objects through cooling slots.

•If connected devices overheat, turn them off and disconnect them from generator.

•Shut off generator if:

-electrical output is lost;

-equipment sparks, smokes, or emits flames; -unit vibrates excessively.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents 030238 Safety Rules Table of ContentsEquipment Description When Adding or Draining Fuel When Starting EquipmentWhen Operating Equipment When Transporting or Repairing EquipmentWhen Adjusting or Making Repairs to Your Generator When Testing for Engine SparkKnow Your Generator Install Wheel Kit AssemblyRemove Generator From Carton When Adding Fuel Install fuel cap and wipe up any spilled fuelBefore Starting the Engine Add Engine OilUsing the Generator Connecting to a Building’s Electrical SystemSystem Ground Generator LocationOperating Generator Connecting Electrical LoadsStarting the Engine Receptacles Cold Weather OperationStopping the Engine 120/240 Volt AC, 20 Amp, Locking ReceptacleRemove shelter when temperatures are above 40F 4C Permanent Cold Weather ShelterDont Overload Generator Power ManagementCapacity Specifications General Maintenance RecommendationsEngine Maintenance Generator MaintenanceTroubleshooting Problem Cause CorrectionStorage Generator StorageConsumer Use Years Years or YearSymboles de Danger et Moyens Veuillez Conserver CES Instructions Table DES MatièresDescription DE L Équipement Règles DE SécuritéLors DE Lajout OU DE LA Vidange DU Carburant Lors DU Démarrage DE LéquipementLorsque Léquipement Fonctionne Lorsque Vous Transportez OU Réparez LéquipementLorsque Vous Réglez OU Réparez Votre Générateur Lors DE Tests Dallumage DU MoteurBouchon de remplissage dhuile Ajoutez de lhuile au Connaissez Votre GénérateurMoteur à cet endroit Installe la Roue la Trousse Référez-vous à la et installez les roues comme suitAssemblage Enlever le générateur de la boiteAvant LE Démarrage DU Moteur Ajoutez de lhuile à moteurAjoutez de lessence Lors DE Lajout DU CarburantEmplacement de la Génératrice Utilisation DE LA GénératriceMise à la terre du système Branchement au système électrique dun édificeDémarrage du Moteur Utilisation DU GénérateurBranchement des Charges Électriques Prises DE Courant Fonctionnement PAR Temps FroidArrêt du Moteur Prise à Verrouillage de 120/240 Volts c.a., 20 AmpèresAbri Permanent Pour Temps Froids VentNE PAS Surchargez Générateur CapacitéGestion de la Consommation ExempleRecommandations Générales D’ENTRETIEN SpécificationsEntretien du Moteur Entretien du GénérateurDépannage RemisageRemisage du Générateur Remisage du MoteurGarantie Limitée Conserve Estas Instrucciones Tabla DE Contenidos Descripción DEL EquipoReglas DE Seguridad AdvertenciaCuando Añada Combustible O Vacíe EL Depósito Cuando Ponga EN Funcionamiento EL EquipoCuando Opere EL Equipo Cuando Transporte O Repare EL EquipoCuando Ajuste O Haga Reparaciones a SU Generador PrecauciónCuando Pruebe LA Bujía DEL Motor Conozca SU Generador Tapa del Depósito del Aceite Llene el motor con aceiteTomacorriente Dobles de 120 Voltios AC, 20 Amp Tomacorriente con Dispositivo de Seguridad deInstale el Juego de Ruedas MontajePara Retirar El Generador De La Caja Antes DE Darle Arranque AL Motor Agregar Aceite al MotorAgregue Combustible Coloque la generador sobre una superficie niveladaUSO DEL Generador Tierra del SistemaConexión al Sistema Eléctrico de un Edificio Ubicación del GeneradorOperando EL Generador Encienda el MotorConexion De Cargas Electricas No Sobrecargue EL GENERADOR.Vea No Sobrecargue GeneradorReceptáculos Precaución Operación Durante UN Clima FríoParado Del Motor 120/240 Voltios AC, 20 Amp, Receptáculo de SeguridadFigura 23 Refugio Frío Permanente del Tiempo No Sobrecargue Generador CapacidadControl de la Energía EjemploEspecificaciones Recomendaciones Generales DE MantenimientoMantenimiento del Motor Mantenimiento del GeneradorAlmacenamiento Almacenando el GeneradorAlmacenando el Motor Otras Sugerencias Para el AlmacenandoDiagnositicos DE Averías Garantía Limitada

30238 specifications

The Briggs & Stratton 30238 is a powerful and reliable generator, widely recognized for its exceptional performance and durable construction. Designed for residential and light commercial use, this generator is equipped with features that make it an ideal choice for both backup power during outages and for powering tools and appliances on job sites.

One of the standout features of the Briggs & Stratton 30238 is its robust engine. Powered by a 7,500-watt starting and 6,000-watt running capability, it is capable of handling heavy loads with ease. The generator is equipped with a strong OHV (Overhead Valve) engine that offers improved fuel efficiency and lower emissions, ensuring it runs cleanly and efficiently.

Another key characteristic of the 30238 is its large fuel tank. With a capacity of 5 gallons, this generator provides an impressive runtime of up to 9 hours at 50% load. This means users can rely on the 30238 for extended periods without frequent refueling, a crucial feature during extended power outages or when working on-site.

The Briggs & Stratton 30238 also boasts a user-friendly control panel with multiple outlets for convenience. It includes two 120V 20A household outlets, one 120V 30A locking outlet, and even a 12V DC outlet, allowing users to power various appliances simultaneously. This versatility makes it easy to connect everything from refrigerators to power tools, ensuring you have what you need when you need it.

In terms of safety and ease of use, the generator is equipped with a low-oil shutdown feature that automatically turns off the engine when the oil level becomes too low. This helps prevent engine damage and prolongs the life of the generator. Additionally, the unit features a recoil start for easy operation, making it accessible to users of all experience levels.

Durability is another hallmark of the Briggs & Stratton 30238. It features a sturdy steel frame designed to withstand tough conditions, making it ideal for use in various environments. Coupled with a compact design, the generator is also relatively easy to transport, facilitating mobility when it is needed the most.

In summary, the Briggs & Stratton 30238 is a powerful and reliable generator that combines performance, efficiency, and user-friendly features. With its strong engine, extended runtime, versatile outlets, safety features, and durable construction, it stands out as an excellent choice for anyone in need of reliable backup power or a dependable portable generator for various tasks.
Top Page Image Contents