Briggs & Stratton 30205 Before Starting the Engine, Add Fuel, Engine Oil, Oil Considerations

Page 7

ASSEMBLY

BEFORE STARTING THE ENGINE

Add Fuel

NOTE: This gasoline engine is certified to operate on

gasoline. Exhaust Emission Control System: EM (Engine Modifications).

Engine Oil

This engine is shipped from the factory filled with the recommended oil (API SJ or higher SAE 30). Before starting the engine, check oil level and ensure that engine is serviced as described in the engine operator’s manual.

CAUTION

Any attempt to crank or start the engine before it has been properly filled with the recommended oil will result in equipment failure.

•Refer to engine operator’s manual for oil fill information.

•Damage to equipment resulting from failure to follow this instruction will void warranty.

WARNING

Fuel and its vapors are extremely flammable and explosive.

Fire or explosion can cause severe burns or death.

WHEN ADDING FUEL

•Turn generator OFF and let it cool at least 2 minutes before removing fuel cap. Loosen cap slowly to relieve pressure in tank.

•Fill fuel tank outdoors.

•DO NOT overfill tank. Allow space for fuel expansion.

•Keep fuel away from sparks, open flames, pilot lights, heat, and other ignition sources.

•DO NOT light a cigarette or smoke.

Oil Considerations

Your generator is equipped with an engine that has been pre-run at the factory and does not require the traditional “break-in” procedure.

NOTE: The generator assembly rotates on a prelubricated and sealed ball bearing that requires no additional lubrication for the life of the bearing.

1.Use clean, fresh, regular UNLEADED gasoline with a minimum of 85 octane. DO NOT use fuel which contains Methanol. DO NOT mix oil with fuel.

2.Clean area around fuel fill cap, remove cap.

3.Slowly add regular unleaded fuel to fuel tank. Be careful not to overfill. Allow about 2.25" of tank space for fuel expansion (Figure 3).

Figure 3 - Fuel Expansion

AirSpace

Tank

 

2.25”

Fuel

 

WARNING

 

Fill tank to approximately 2.25” below top of neck to allow for fuel expansion.

•Replace “1.5” with “2.25” fuel fill level given in engine manual.

•Failure to follow this instruction may cause fuel to overexpand and spill from tank.

4.Install fuel cap and wait for any spilled fuel to evaporate.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Model / Modelo Starting WattsCall Generator Helpline Llame Línea Directa del Generador Safety Rules Table of ContentsEquipment Description When Transporting or Repairing Equipment When Adding or Draining FuelWhen Starting Equipment When Operating EquipmentWhen Testing for Engine Spark When Adjusting or Making Repairs to Your GeneratorVolt AC, 20 Amp Duplex Receptacles May be Rocker Switch Circuit Breaker The 120/240 VoltBattery Float Charger Jack Use battery float charger Know Your GeneratorUnpacking the Generator AssemblyAttach Handle to Unit Engine Oil When Adding FuelBefore Starting the Engine Add FuelGenerator Location Using the GeneratorConnecting to a Building’s Electrical System System GroundStarting the Engine Operating GeneratorDo not Overload GENERATOR. See Don’t Overload Generator Connecting Electrical LoadsHow to Use the Battery Charger Stopping the Engine120/240 Volt AC, 30 Amp, Locking Receptacle ReceptaclesVolt AC, 20 Amp, Duplex Receptacle Example Power ManagementDON’T Overload Generator CapacityDamaged or defective generator SpecificationsGeneral Maintenance Recommendations Engine MaintenanceStorage Problem Cause Correction TroubleshootingPage Limited Warranty Advertencia Tabla DE ContenidosDescripción DEL Equipo Reglas DE SeguridadCuando Transporte O Repare EL Equipo Cuando Añada Combustible O Vacíe EL DepósitoCuando Ponga EN Funcionamiento EL Equipo Cuando Opere EL EquipoCuando Ajuste O Haga Reparaciones a SU Generador PrecauciónCuando Pruebe LA Bujía DEL Motor Culatazo el Principio Usó para comenzar motor Conozca SU GeneradorDesembalaje del Generador MontajeConecte el Manubrio Consideraciones Sobre el Aceite Antes DE Darle Arranque AL MotorAceite de Motor Agregue CombustibleConexión al Sistema Eléctrico de un Edificio USO DEL GeneradorTierra del Sistema Ubicación del GeneradorEncienda el Motor Operando EL GeneradorNo Sobrecargue GENERADOR. Vea No Sobrecargue Generador Conexion De Cargas ElectricasParado Del Motor Cómo al Uso el Corcel de Batería120/240 Voltios AC, 30 Amperios, Receptáculo de Seguridad Receptáculos PrecauciónVolt AC, 20 Amperios, Receptáculos Dobles Ejemplo No Sobrecargue GeneradorCapacidad Control de la EnergíaOpere un generador que esté dañado o defectuoso EspecificacionesRecomendaciones Generales DE Mantenimiento Mantenimiento del MotorAlmacenamiento Diagnositicos DE Averías Problemo Causa AccionUso comercial Uso del consumidor

30205 specifications

Briggs & Stratton 30205 is a powerful and versatile portable generator that combines reliability with advanced technology, making it an excellent choice for home use, outdoor activities, or emergency power supply. Designed to deliver consistent performance, the 30205 model is equipped with a host of features that cater to both casual users and those who require a dependable power source during outages.

One of the standout features of the Briggs & Stratton 30205 is its sturdy 306cc engine, which is engineered for efficient fuel consumption and reduced emissions. This gasoline-powered engine generates an impressive 3,500 watts of starting power and 3,000 watts of running power, ensuring that it can handle a variety of applications, from powering appliances to running tools on the job site.

Durability is a hallmark of Briggs & Stratton products, and the 30205 does not disappoint. It features a rugged steel frame that provides protection against physical damage while enhancing stability during operation. The compact and portable design, complemented by durable wheels, allows for easy transport, making it a popular choice for camping trips or tailgate parties.

Technologically, the 30205 is equipped with an intuitive control panel that includes multiple outlet options, allowing users to connect different devices simultaneously. This generator includes both 120V and 120/240V outlets, providing flexibility for various power needs. Additionally, it incorporates a low oil shutdown feature to protect the engine from damage, automatically turning the generator off when oil levels are critically low.

For ease of use, the Briggs & Stratton 30205 also boasts a recoil start mechanism that ensures reliable operation regardless of conditions. Maintenance is made simple with easily accessible components, so users can keep the generator in peak condition with minimal effort.

In conclusion, the Briggs & Stratton 30205 represents a well-rounded solution for anyone in need of portable power. With its robust engine, durability, and user-friendly features, it stands out as a reliable option for both everyday use and emergencies. Whether for home back-up power or outdoor adventures, the 30205 generator is a practical investment for peace of mind.
Top Page Image Contents