Briggs & Stratton 030319 Engine Technical Information, Product Specifications, Power Ratings

Page 12

SPECIFICATIONS

ENGINE TECHNICAL

INFORMATION

This is a single cylinder, overhead valve(OHV), air cooled engine. It is a low emissions engine.

In the State of California, Model Series 120000 engines are certified by the California Air Resources Board to meet emissions standards for 125 hours. Such certification does not grant the purchaser, owner or operator of this engine any additional warranties with respect to the performance or operational life of this engine.The engine is warranted solely according to the product and emissions warranties stated elsewhere in this manual.

PRODUCT

SPECIFICATIONS

Generator Specifications

Starting Wattage

.5,000 Watts

Wattage

4,000 Watts

Rated AC Load Current:

 

At 120 Volts

. .33.3 Amps

Phase

. . . .1–phase

Rated Frequency

. . .60 Hertz

Shipping Weight

. . . .140 lbs.

Power Ratings

*The power ratings for an individual engine model are initially developed by starting with SAE (Society of Automotive Engineers) code J1940 (Small Engine Power & Torque Rating Procedure) (Revision 2002-05). Given both the wide array of products on which our engines are placed, and the variety of environmental issues applicable to operating the equipment, it may be that the engine you have purchased will not develop the rated horsepower when used in a piece of power equipment (actual “on-site” power).This difference is due to a variety of factors including, but not limited to, the following: differences in altitude, temperature, barometric pressure, humidity, fuel, engine lubrication, maximum governed engine speed, individual engine to engine variability, design of the particular piece of power equipment, the manner in which the engine is operated, engine run-in to reduce friction and clean out of combustion chambers, adjustments to the valves and carburetor, and other factors.The power ratings may also be adjusted based on comparisons to other similar engines utilized in similar applications, and will therefore not necessarily match the values derived using the foregoing codes.

Engine Specifications

Gross* Horsepower . . . . . . . . . . . . . . . . . 6.5 at 3600 rpm Bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.69 in. (68mm) Stroke . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.20 in. (56mm) Displacement . . . . . . . . . . . . . . . . . . . . . . 12.57 in. (206 cc)

Spark Plug

Type: . . . . . . . . . . . . Champion RC12YC or Equivalent

Set Gap To: . . . . . . . . . . . . . . . . . . . 0.030inch (0.76mm)

Armature Air Gap: . . . . . . . . . . . . . . . . . . . . 0.010-0.014 in. (0.25-0.36mm)

Valve clearance with valve springs installed and piston 1/4 in. (6 mm) past top dead center (check when engine is cold).

Intake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.004-0.006 in. (0.10-0.15 mm)

Exhaust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.009-0.011 in. (0.23-0.28 mm)

Fuel Capacity . . . . . . . . . . . . . . . . . . . . . . . . . 4 U.S. gallons Oil Capacity . . . . . . . . . . . . . . . . . . . .20 Ounces (.6 Liters)

NOTE: For practical operation, the generator load should not exceed 85% of rated wattage. Engine gross horsepower will decrease 3-1/2% for each 1,000 feet (300 meters) above sea level and 1% for each 10° F (5.6° C) above 77° F

(25° C). It should operate satisfactorily at an angle up to 15°.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Starting Watts Operator’s Manual Manual del OperarioCall Generator Helpline Llame Línea Directa del Generador Table of Contents Safety RulesEquipment Description When Adding or Draining Fuel When Starting EquipmentWhen Operating Equipment When Transporting or Repairing EquipmentWhen Adjusting or Making Repairs to Your Generator When Testing for Engine SparkKnow Your Generator Assembly Install Wheel KitRefer to and install the wheel kit as follows Unpacking the GeneratorBefore Starting the Engine Add Engine OilAdd Fuel Type of FuelUsing the Generator Connecting to a Building’s Electrical SystemSystem Ground Generator LocationOperating Generator Starting the EngineConnecting Electrical Loads ReceptaclesStopping the Engine Volt AC, 20 Amp, Duplex ReceptaclesPower Management Dont Overload GeneratorCapacity ExampleProduct Specifications Generator SpecificationsPower Ratings Engine SpecificationsGenerator Maintenance Generator CleaningGeneral Recommendations Engine Maintenance Servicing Air CleanerOil To service the air cleaner, follow these steps Changing Engine OilServicing Spark Plug Servicing Spark ArresterClean Cooling System Carburetor AdjustmentClean and inspect the spark arrester as follows Storage Long Term Storage InstructionsProtect Fuel System GeneratorTroubleshooting Page Emissions Control System Warranty Owner’s Warranty ResponsibilitiesPage Page Limited Warranty Tabla DE Contenidos Descripción DEL EquipoReglas DE Seguridad AdvertenciaCuando Añada Combustible O Vacíe EL Depósito Cuando Ponga EN Funcionamiento EL EquipoCuando Opere EL Equipo Cuando Transporte O Repare EL EquipoPrecaución Cuando Ajuste O Haga Reparaciones a SU GeneradorCuando Pruebe LA Bujía DEL Motor Conozca SU Generador Montaje Desembalaje del GeneradorInstale el Juego de Ruedas Antes DE Darle Arranque AL Motor Agregar Aceite al MotorAgregue Combustible Cuando Añada CombustibleUSO DEL Generador Tierra del SistemaConexión al Sistema Eléctrico de un Edificio Ubicación del GeneradorOperando EL Generador Encienda el MotorReceptáculos Precaución Conexion De Cargas ElectricasParado Del Motor Volt AC, 20 Amperios, Receptáculos DoblesNo Sobrecargue Generador CapacidadControl de la Energía EjemploInformación Técnica Sobre EL Motor Especificaciones DEL ProductoEspecificaciones del Generador Potencia NominalRecomendaciones Generales Mantenimiento DELGenerador Limpieza del GeneradorMantenimiento DEL Motor Advertencia AceiteServicio del Depurador de Aire Cambio de Aceite del Motor Limpie/Reemplace la BujíaLimpie la Pantalla Apagachispas Para revisar el filtro de aire, siga estos pasosSistema de Refrigeración de Aire Ajuste del CarburadorLimpie e inspeccione el apagachispas de la siguiente manera Almacenamiento Almacenamiento Para Periodos ProlongadosProteja el Sistema de Combustible GeneradorProblemo Causa Accion Diagnositicos DE AveríasNotas Garantía DEL Sistema DE Control DE Emisiones = 250 horas, B = 500 horas y a = 1000 horas Uso del consumidor Uso comercial

030319, 030320 specifications

Briggs & Stratton has been a trusted name in the power equipment industry for over a century, and their 030320 and 030319 models are perfect examples of their commitment to quality and innovation. These engines are designed to power a variety of outdoor equipment, including lawn mowers, generators, and pressure washers, making them a versatile choice for homeowners and professionals alike.

One of the main features of the Briggs & Stratton 030320 and 030319 engines is their impressive power output. The 030320 model boasts a robust 550cc displacement, while the 030319 offers a slightly lower 450cc. This power enables these engines to tackle demanding tasks with ease, ensuring that users can complete their projects efficiently and effectively.

Both models are equipped with advanced technologies that enhance performance and reliability. The ReadyStart system allows for effortless starting without the need to prime or choke the engine, significantly reducing the time spent preparing the equipment for use. Additionally, the engines feature a durable overhead valve (OHV) design, which promotes better fuel efficiency and reduced emissions compared to traditional side-valve engines.

Another key characteristic of the Briggs & Stratton 030320 and 030319 engines is their robust construction. They are built with high-quality materials, which provide durability and longevity, making them suitable for heavy-duty applications. The engines also feature a steel crankshaft that withstands high-stress conditions and a cast iron sleeve for improved wear resistance.

Maintenance is made easy with these engines, thanks to their accessible oil drain and air filter design. Users can quickly change the oil and replace the air filter, ensuring that the engine functions at peak performance over time. This focus on user-friendly maintenance makes the 030320 and 030319 models ideal for individuals who want reliable performance without the hassle of complicated upkeep.

Safety is also a priority in the design of these engines. They come equipped with features such as a low-oil shutdown system that automatically turns off the engine when oil levels drop too low, preventing potential damage. This added layer of protection ensures that users can operate their equipment with peace of mind.

In summary, the Briggs & Stratton 030320 and 030319 engines combine power, efficiency, durability, and user-friendly features. Whether you are a homeowner tackling seasonal yard work or a professional in need of reliable equipment, these engines deliver exceptional performance and reliability, solidifying Briggs & Stratton’s reputation as a leader in the industry.
Top Page Image Contents