Briggs & Stratton Portable Generator System Ground, Connecting to a Building’s Electrical System

Page 9

System Ground

The generator has a system ground that connects the generator frame components to the ground terminals on the AC output receptacles. The system ground is connected to the AC neutral wire (the neutral is bonded to the generator frame).

Special Requirements

There may be Federal or State Occupational Safety and Health Administration (OSHA) regulations, local codes, or ordinances that apply to the intended use of the generator. Please consult a qualified electrician, electrical inspector, or the local agency having jurisdiction:

•In some areas, generators are required to be registered with local utility companies.

•If the generator is used at a construction site, there may be additional regulations which must be observed.

Connecting to a Building’s Electrical System

Connections for standby power to a building’s electrical system must be made by a qualified electrician. The connection must isolate the generator power from utility power and must comply with all applicable laws and electrical codes.

WARNING

Generator produces hazardous voltage.

Failure to isolate generator from power utility can result in death or injury to electric utility workers due to backfeed of electrical energy.

•When using generator for backup power, notify utility company. Use approved transfer equipment to isolate generator from electric utility.

•Use a ground fault circuit interrupter (GFCI) in any damp or highly conductive area, such as metal decking or steel work.

•DO NOT touch bare wires or receptacles.

•DO NOT use generator with electrical cords which are worn, frayed, bare or otherwise damaged.

•DO NOT operate generator in the rain or wet weather.

•DO NOT handle generator or electrical cords while standing in water, while barefoot, or while hands or feet are wet.

•DO NOT allow unqualified persons or children to operate or service generator.

Generator Location

Clearances and Air Movement

WARNING

Exhaust heat/gases can ignite combustibles, structures or damage fuel tank causing a fire.

•Keep at least 5 ft. (1.5 m) clearance on all sides of generator including overhead.

Place generator outdoors in an area that will not accumulate deadly exhaust gas. DO NOT place generator where exhaust gas (A) could accumulate and enter inside or be drawn into a potentially occupied building. Ensure exhaust gas is kept away from any windows, doors, ventilation intakes, or other openings that can allow exhaust gas to collect in a confined area. Prevailing winds and air currents should be taken into consideration when positioning generator.

A

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Operator’s Manual Generator Where to Find UsEngine Date PurchasedTable of Contents Safety Rules Operator SafetySafety alert symbol is used with a signal word Hazard Symbols and MeaningsEngine exhaust from this product contains Certain components in this product and relatedGenerator produces hazardous voltage Broken bones, fractures, bruises, or sprains could resultWhen Testing for Engine Spark Contact with muffler area can result in serious burnsUnintentional sparking can result in fire or electric shock Install Wheel Kit AssemblyInstall the wheel kit as follows Unpack GeneratorVerify Engine Oil Level When Adding FuelAdd Fuel Fuel must meet these requirementsSystem Ground Connecting to a Building’s Electrical SystemGenerator Location Special RequirementsVolt AC, 20 Amp, Duplex Receptacles May be Features and ControlsNema L14-30 Cord Sets and ReceptaclesGenerator Adapter Cord Set 120/240 Volt AC, 30 Amp, Locking ReceptacleStarting the Engine OperationConnecting Electrical Loads Stopping the EngineMove fuel valve to Off position Power Management Select the items you will power at the same timeDon’t Overload Generator CapacityMaintenance Maintenance ScheduleGenerator Maintenance Oil Oil Recommendations Engine MaintenanceChecking Oil Level Adding Engine OilService Spark Plug Service Air CleanerInstall spark plug and tighten firmly Service Spark ArresterClean Cooling System Clean and inspect the spark arrester as followsCarburetor Adjustment Check Valve ClearanceStorage Troubleshooting Emissions Control System Warranty Owner’s Warranty ResponsibilitiesWarranties Maintenance Emission InformationClaims and Coverage Exclusions Limited Warranty Common Service Parts Product SpecificationsAC Load Current 800Manual del Operario Generador Dónde encontrarnosMotor Fecha de compraSeguridad de operario Resolución de problemas GarantíasMontaje Controles y característicasDescripción del equipo Seguridad de operarioReglas de seguridad Símbolos de peligro y sus significadosDeclaradas cancerígenas, causantes de Determinados componentes en este producto y losCuando Pruebe LA Bujía DEL Motor Cuando Ajuste O Haga Reparaciones a SU Máquina GeneradorDesembalaje del generador MontajeInstale el juego de ruedas Siga estos pasos para instalar el juego de ruedasAgregue combustible Comprobar el nivel de aceite del motorEl combustible debe reunir los siguientes requisitos Evite el daño del generadorConexión al sistema eléctrico de un edificio Tierra del sistemaUbicación del generador Requisitos EspecialesAmperios, monofásica de 60 Hz Controles y característicasJuego de cables del adaptador del generador Juegos de cordones y enchufes conectoresDispositivo de seguridad de 120/240 V, 30 a Tomas eléctricas dobles de 120 V CA y 20 aEncienda el motor OperandoParada del motor Conexión de cargas eléctricasEl motor podría petardear, incendiarse o dañarse Gire la válvula de combustible hasta la posición OffCapacidad No sobrecargar el generadorEjemplo Control de la energíaMantenimiento Plan de mantenimientoMantenimiento del generador Aceite Recomendaciones sobre el aceite Mantenimiento del motorComprobación del nivel de aceite Adición de aceite del motorServicio del depurador de aire CarburadorServicio del bujía Limpie la pantalla apagachispasSistema de refrigeración de aire Limpie e inspeccione el apagachispas de la siguiente maneraComprobación de holgura de la válvula Ajuste del carburadorAlmacenamiento Resolución de problemas Garantía del sistema de control de emisiones GarantíasResponsabilidades de la garantía del propietario Operaciones de mantenimiento que se enumeran en lasInformación sobre emisiones Garantía Limitada Especificaciones del producto Servicio común despideCorriente Carga de C.A

Portable Generator specifications

Briggs & Stratton portable generators have become a trusted choice for both homeowners and professionals who need reliable power on the go. Known for their robust design and innovative features, these generators are engineered to deliver exceptional performance in various applications, from outdoor events to emergency backup during power outages.

One of the key features of Briggs & Stratton portable generators is their powerful engine options. Equipped with reliable four-stroke engines, these generators provide ample power to run essential appliances, tools, and equipment. Models like the Briggs & Stratton P4500 are especially praised for their inverter technology, which produces clean power suitable for sensitive electronics. This means users can confidently power laptops, TVs, and other sensitive devices without the risk of damage due to power surges.

Technology plays a pivotal role in enhancing the usability of Briggs & Stratton generators. The equipped PowerSmart Series technology allows for smart engine management, optimizing fuel efficiency while delivering consistent power output. This not only saves fuel but also extends the runtime, making them perfect companions for long camping trips or power outages.

Portability is another hallmark of Briggs & Stratton generators. Many units come with built-in handles and transport wheels, making it easy to move them from one location to another. Their lightweight yet durable construction ensures that even larger models can be handled by one or two people, providing convenience without sacrificing strength.

In terms of safety features, Briggs & Stratton portable generators are designed with user protection in mind. Many models include low-oil shutdown systems that automatically halt operation when oil levels drop dangerously low, preventing engine damage. Additionally, their built-in circuit breakers help avoid overloads, ensuring that the generator operates safely and efficiently.

Other noteworthy characteristics include easy-start engines, easy-access control panels, and multiple outlet options, which enhance their versatility for various types of users. With features such as USB outlets, users can charge personal electronics alongside their other power needs.

In summary, Briggs & Stratton portable generators stand out due to their power, efficiency, portability, and safety features. These generators are an essential investment for anyone seeking reliable power solutions, whether for recreational use, construction work, or emergency preparedness. With a legacy of quality and innovation, Briggs & Stratton continues to set a benchmark in the portable generator market.
Top Page Image Contents