Features and Controls
Read this Operator’s Manual and safety rules before operating your generator.
Compare the illustrations with your generator, to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference.
N
A
B
M C 
D
E 
F
G
H
L
K
J
A - Choke Lever — Used when starting a cold engine.
B - Rocker Switch — Set this switch to “On” before using recoil starter. Set switch to “Off” to stop engine.
C - Air Cleaner — Protects engine by filtering dust and debris out of intake air.
D - Recoil Starter — Used to start the engine. E - Oil Drain Plug — Drain engine oil here.
F - Circuit Breakers (AC) —
G - 120 Volt AC, 20 Amp, Duplex Receptacles — May be used to supply electrical power for the operation of
120 Volt AC, 20 Amp, single phase, 60 Hz electrical, lighting, appliance, tool, and motor loads.
H - 120/240 Volt AC, 20 Amp Locking Receptacle — May be used to supply electrical power for the operation of 120 and/or 240 Volt AC, 20 Amp, single phase, 60 Hz electrical, lighting, appliance, tool and motor loads.
J - Grounding Fastener — Consult your local agency having jurisdiction for grounding requirements in your area.
K - Data Tag — Provides model, revision, and serial number of generator. Please have these readily available when calling for assistance.
L - Spark Arrester Muffler — Exhaust muffler lowers engine noise and is equipped with a spark arrester screen.
M - Fuel Tank — Capacity of four (4) U.S. gallons (15 L). N - Oil Fill Cap — Check and fill engine with oil here.
Items Not Shown:
Engine Identification — Provides model, type and code of engine. Please have these readily available if calling for assistance.
8 | BRIGGSandSTRATTON.COM |